Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread: Parameter is incorrect

  1. #1
    Pete
    Guest

    Default Parameter is incorrect

    I have been using Netobjects for almost 2 years now, yesterday I started
    getting a msg "Parameter is incorrect" when I start NetObjects, I can work
    in program but will not let me change settings, also on left side of start
    up page it will not let me go to any of the features in the left hand
    column.

    I tried reloading the update from your website, rebooted with no luck.

    Thanks Pete


  2. #2
    Senior Member gotFusion's Avatar
    Join Date
    Jan 2010
    Location
    www.gotHosting.biz
    Posts
    4,526

    Default

    Quote Originally Posted by Pete View Post
    I have been using Netobjects for almost 2 years now, yesterday I started
    getting a msg "Parameter is incorrect" when I start NetObjects, I can work
    in program but will not let me change settings, also on left side of start
    up page it will not let me go to any of the features in the left hand
    column.

    I tried reloading the update from your website, rebooted with no luck.

    Thanks Pete

    Have you seen this? http://forums.netobjects.com/showthr...indows-Vista-7
    NetObjects Fusion Cloud Linux enabled Web Hosting, support + training starts at $14.95
    NetObjects Fusion web Hosting and support + ASP + PHP + ColdFusion + MySQL + MS SQL
    FREE NetObjects Fusion Support & training comes with all web hosting accounts
    NetObjects Fusion Web Hosting: http://www.gotHosting.biz

  3. #3
    Pete
    Guest

    Default Re: Parameter is incorrect

    Have done that , just checked it again, did that when I bought the Vista
    machine 1 1/2 years ago, everything was working fine until yesterday when I
    got the msg "The Parameter is incorrect"

    Pete

    "gotFusion" <gotFusion.4cls6z@no-mx.forums.netobjects.com> wrote in message
    news:gotFusion.4cls6z@no-mx.forums.netobjects.com...
    >
    > Pete wrote:
    >> I have been using Netobjects for almost 2 years now, yesterday I started
    >> getting a msg "Parameter is incorrect" when I start NetObjects, I can
    >> work
    >> in program but will not let me change settings, also on left side of
    >> start
    >> up page it will not let me go to any of the features in the left hand
    >> column.
    >>
    >> I tried reloading the update from your website, rebooted with no luck.
    >>
    >> Thanks Pete

    >
    >
    > Have you seen this? http://tinyurl.com/y47nduy
    >
    >
    >
    > Mike - (turtle) - gotHosting.biz - gotFusion.com
    > Web Hosting + hand holding support - ASP, PHP, ColdFusion
    > FREE one on one Fusion Support with all web hosting accounts
    > Microsoft Windows and Red Hat Linux web hosting platforms
    > http://www.gotFusion.com - http://www.gotHosting.biz



  4. #4
    Senior Member gotFusion's Avatar
    Join Date
    Jan 2010
    Location
    www.gotHosting.biz
    Posts
    4,526

    Default

    Quote Originally Posted by Pete View Post
    Have done that , just checked it again, did that when I bought the Vista
    machine 1 1/2 years ago, everything was working fine until yesterday when I
    got the msg "The Parameter is incorrect"

    Pete
    Use control panel to uninstall Fusion.

    Re-install it as an administrator.

    On the first run of the program, right click and select run as administrator.
    NetObjects Fusion Cloud Linux enabled Web Hosting, support + training starts at $14.95
    NetObjects Fusion web Hosting and support + ASP + PHP + ColdFusion + MySQL + MS SQL
    FREE NetObjects Fusion Support & training comes with all web hosting accounts
    NetObjects Fusion Web Hosting: http://www.gotHosting.biz

  5. #5
    Pete
    Guest

    Default Re: Parameter is incorrect

    I have thought about the reinstall, I had upgraded from Netobjects 10 about
    2 years ago, I have the ID# for the upgrade to 11 but I seem to have missed
    placed the ID# number for Netobjects 10. It stills show 10 on my computer
    but will not open, is there a way to get the ID# out of the 10 files? I
    think I need both numbers to do the upgrade?

    Pete


    "gotFusion" <gotFusion.4clwtn@no-mx.forums.netobjects.com> wrote in message
    news:gotFusion.4clwtn@no-mx.forums.netobjects.com...
    >
    > Pete wrote:
    >> Have done that , just checked it again, did that when I bought the Vista
    >> machine 1 1/2 years ago, everything was working fine until yesterday
    >> when I
    >> got the msg "The Parameter is incorrect"
    >>
    >> Pete
    >>
    >>

    >
    > Use control panel to uninstall Fusion.
    >
    > Re-install it as an administrator.
    >
    > On the first run of the program, right click and select run as
    > administrator.
    >
    >
    >
    > Mike - (turtle) - gotHosting.biz - gotFusion.com
    > Web Hosting + hand holding support - ASP, PHP, ColdFusion
    > FREE one on one Fusion Support with all web hosting accounts
    > Microsoft Windows and Red Hat Linux web hosting platforms
    > http://www.gotFusion.com - http://www.gotHosting.biz



  6. #6
    Senior Member gotFusion's Avatar
    Join Date
    Jan 2010
    Location
    www.gotHosting.biz
    Posts
    4,526

    Default

    Quote Originally Posted by Pete View Post
    I have thought about the reinstall, I had upgraded from Netobjects 10 about
    2 years ago, I have the ID# for the upgrade to 11 but I seem to have missed
    placed the ID# number for Netobjects 10. It stills show 10 on my computer
    but will not open, is there a way to get the ID# out of the 10 files? I
    think I need both numbers to do the upgrade?

    Pete
    You will need a valid qualifying key to install an upgrade.

    Fusion stores the SN in your computer registry.

    See this old topic on how to find them

    http://forums.netobjects.com/showthread.php?9283
    NetObjects Fusion Cloud Linux enabled Web Hosting, support + training starts at $14.95
    NetObjects Fusion web Hosting and support + ASP + PHP + ColdFusion + MySQL + MS SQL
    FREE NetObjects Fusion Support & training comes with all web hosting accounts
    NetObjects Fusion Web Hosting: http://www.gotHosting.biz

  7. #7
    Pete
    Guest

    Default Re: Parameter is incorrect

    Found it, thanks, starting to backup my user site files one more time before
    I uninstall Netobjects 11.
    I will let you know how it goes, says I have 117 GB in my usersites to copy,
    I guess that is about right for about 1500 pages on the web.

    Pete

    "gotFusion" <gotFusion.4cm2bz@no-mx.forums.netobjects.com> wrote in message
    news:gotFusion.4cm2bz@no-mx.forums.netobjects.com...
    >
    > Pete wrote:
    >> I have thought about the reinstall, I had upgraded from Netobjects 10
    >> about
    >> 2 years ago, I have the ID# for the upgrade to 11 but I seem to have
    >> missed
    >> placed the ID# number for Netobjects 10. It stills show 10 on my
    >> computer
    >> but will not open, is there a way to get the ID# out of the 10 files? I
    >> think I need both numbers to do the upgrade?
    >>
    >> Pete
    >>

    >
    > You will need a valid qualifying key to install an upgrade.
    >
    > Fusion stores the SN in your computer registry.
    >
    > See this old topic on how to find them
    >
    > http://forums.netobjects.com/showthread.php?9283
    >
    >
    >
    > Mike - (turtle) - gotHosting.biz - gotFusion.com
    > Web Hosting + hand holding support - ASP, PHP, ColdFusion
    > FREE one on one Fusion Support with all web hosting accounts
    > Microsoft Windows and Red Hat Linux web hosting platforms
    > http://www.gotFusion.com - http://www.gotHosting.biz



  8. #8
    Senior Member chuckj's Avatar
    Join Date
    Jan 2010
    Location
    www.beyondfusion.com - Florida
    Posts
    1,302

    Default

    Uninstalling fusuion does not remove the User Sites folder or its contents.

    Backing up is more of a "feel good" exercise.

    I've heard of users uninstalling the program and then deleting the Fusion folder and all of its contents and then wondering why their sites were gone.

    Back before Vista anyway. User Sites doesn't end up in the program folder under Vista and Win 7.
    Chuck Joslin
    www.BeyondFusion.com
    PHP & MySQL development with Fusion
    Fusion support for AllWebMenus (Likno) Contact me for custom AWM menus for your sites.
    Tutorials and Forums

  9. #9
    Senior Member gotFusion's Avatar
    Join Date
    Jan 2010
    Location
    www.gotHosting.biz
    Posts
    4,526

    Default

    Quote Originally Posted by Pete View Post
    Found it, thanks, starting to backup my user site files one more time before
    I uninstall Netobjects 11.
    I will let you know how it goes, says I have 117 GB in my usersites to copy,
    I guess that is about right for about 1500 pages on the web.

    Pete
    Use this method of making backups:

    http://www.gotfusion.com/tutorials/tut.cfm?itemID=16

    and this one to re-create site projects

    http://www.gotfusion.com/tutorials/tut.cfm?itemID=17
    NetObjects Fusion Cloud Linux enabled Web Hosting, support + training starts at $14.95
    NetObjects Fusion web Hosting and support + ASP + PHP + ColdFusion + MySQL + MS SQL
    FREE NetObjects Fusion Support & training comes with all web hosting accounts
    NetObjects Fusion Web Hosting: http://www.gotHosting.biz

  10. #10
    Pete
    Guest

    Default Re: Parameter is incorrect

    Thanks Guys reinstalled and everything is the way it should be, thanks for
    the help

    Pete
    www.beachcomberpete.com


    "gotFusion" <gotFusion.4cm3fz@no-mx.forums.netobjects.com> wrote in message
    news:gotFusion.4cm3fz@no-mx.forums.netobjects.com...
    >
    > Pete wrote:
    >> Found it, thanks, starting to backup my user site files one more time
    >> before
    >> I uninstall Netobjects 11.
    >> I will let you know how it goes, says I have 117 GB in my usersites to
    >> copy,
    >> I guess that is about right for about 1500 pages on the web.
    >>
    >> Pete
    >>

    >
    > Use this method of making backups:
    >
    > http://www.gotfusion.com/tutorials/tut.cfm?itemID=16
    >
    > and this one to re-create site projects
    >
    > http://www.gotfusion.com/tutorials/tut.cfm?itemID=17
    >
    >
    >
    > Mike - (turtle) - gotHosting.biz - gotFusion.com
    > Web Hosting + hand holding support - ASP, PHP, ColdFusion
    > FREE one on one Fusion Support with all web hosting accounts
    > Microsoft Windows and Red Hat Linux web hosting platforms
    > http://www.gotFusion.com - http://www.gotHosting.biz



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •