Results 1 to 3 of 3

Thread: Strange things happening with my program

  1. #1
    Laura Weber
    Guest

    Default Strange things happening with my program

    When I open up Netobjects and select a website from the opening page or even
    from the menu, it opens up with a very different look. It used to have
    large menu icons on the top and now it opens up with small icons, a custom
    components list of 26 items on the left side of the screen and as well as
    10 other panels. The properties panel is not visible and I have to resize
    the design area by dragging the right edge in order to find it (just figured
    that out)

    Also, when I close the program it takes about 5 minutes of compressing to
    close down and then I get this error.

    Microsoft Visual Basic C++ Runtime Library
    Runtime Error!
    Program: ...gram Files\Netobjects\NetObjects Fusion 11.0\Fusion.exe
    abnormal program termination

    I am running Vista Ultimate 32bit and, up until about a month ago, have had
    no problems. The computer is on a network but the program is not networked.

    Wondering if I need to reinstall the program.

    Thanks,

    Laura w.


  2. #2
    Cougar-food
    Guest

    Default Re: Strange things happening with my program

    Re-installation never hurts, yeah? Goto HELP, ABOUT and copy the Serial
    Number down for use during the re-installation.

    You will absolutely need to change the installation directory, but all the
    templates and existing sites will be referenced in the new installation.
    Famous last words. But, that being said, I've done this a few times
    successfully.

    Caveat: my stuff is on a simple network and the installation chosen
    (originally) was set to use the Shared Directory. I've elected since to
    keep my User Files/Templates (factory and my design) in a non-shared
    location (locally), but the re-install identifies everything perfectly.

    Caveat #2: this did not help in my own NOF difficulties. Further, it would
    appear that any personalization of the software may also be transferred to
    the re-install. If these issues you view are systemic to the
    personalization of the software a re-install would not solve the issue(s) at
    hand.

    Best of luck and I hope you get more "helpful" feedback on this. Give it a
    shot after creating a Restore Point and/or backup - just out of common,
    sensible paranoia.

    Christopher
    ~ The "Original" Cougar-food ~

    "Laura Weber" <lweber@mnlegion.org> wrote in message
    news:hnb735$i9m$1@DailyPlanet.news.netobjects.com. ..
    > When I open up Netobjects and select a website from the opening page or
    > even from the menu, it opens up with a very different look. It used to
    > have large menu icons on the top and now it opens up with small icons, a
    > custom components list of 26 items on the left side of the screen and as
    > well as 10 other panels. The properties panel is not visible and I have
    > to resize the design area by dragging the right edge in order to find it
    > (just figured that out)
    >
    > Also, when I close the program it takes about 5 minutes of compressing to
    > close down and then I get this error.
    >
    > Microsoft Visual Basic C++ Runtime Library
    > Runtime Error!
    > Program: ...gram Files\Netobjects\NetObjects Fusion 11.0\Fusion.exe
    > abnormal program termination
    >
    > I am running Vista Ultimate 32bit and, up until about a month ago, have
    > had no problems. The computer is on a network but the program is not
    > networked.
    >
    > Wondering if I need to reinstall the program.
    >
    > Thanks,
    >
    > Laura w.




  3. #3
    Cougar-food
    Guest

    Default Re: Strange things happening with my program

    I mis-spoke severely ! I feel so foolish... I believe there was an issue
    with the templates having been destroyed. So, again, backup your stuff,
    Laura. Save the templates someplace safe for re-location to the spot of
    your choice.

    Chris

    "Laura Weber" <lweber@mnlegion.org> wrote in message
    news:hnb735$i9m$1@DailyPlanet.news.netobjects.com. ..
    > When I open up Netobjects and select a website from the opening page or
    > even from the menu, it opens up with a very different look. It used to
    > have large menu icons on the top and now it opens up with small icons, a
    > custom components list of 26 items on the left side of the screen and as
    > well as 10 other panels. The properties panel is not visible and I have
    > to resize the design area by dragging the right edge in order to find it
    > (just figured that out)
    >
    > Also, when I close the program it takes about 5 minutes of compressing to
    > close down and then I get this error.
    >
    > Microsoft Visual Basic C++ Runtime Library
    > Runtime Error!
    > Program: ...gram Files\Netobjects\NetObjects Fusion 11.0\Fusion.exe
    > abnormal program termination
    >
    > I am running Vista Ultimate 32bit and, up until about a month ago, have
    > had no problems. The computer is on a network but the program is not
    > networked.
    >
    > Wondering if I need to reinstall the program.
    >
    > Thanks,
    >
    > Laura w.




Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •