Page 1 of 2 12 LastLast
Results 1 to 10 of 27

Thread: Slow, slow, slow...

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Christian
    Guest

    Default Slow, slow, slow...

    I just installed NOF 10. In the text mode now I can only type very slow
    because any letter takes time to get in... The same the other way around in
    deleting letters, digits, sentences. What could be the reason for?
    Need your help...
    Thanks, Christian





  2. #2
    Dave@Web by Design, Inc.
    Guest

    Default Re: Slow, slow, slow...

    Do the text areas happen to be embedded in tables?

    Dave


    "Christian" <elephant@gmx.net> wrote in message
    news:ekrjes$lgp6@flsun90netnews01.netobjects.com.. .
    >I just installed NOF 10. In the text mode now I can only type very slow
    >because any letter takes time to get in... The same the other way around in
    >deleting letters, digits, sentences. What could be the reason for?
    > Need your help...
    > Thanks, Christian
    >
    >




  3. #3
    Christian
    Guest

    Default Re: Slow, slow, slow...

    No, they are not embedded in any tables - just "basic text fields"...
    Christian

    "Dave@Web by Design, Inc." <dave_no@spam_wbdi.net> schrieb im Newsbeitrag
    news:eks6tp$ocl3@flsun90netnews01.netobjects.com.. .
    > Do the text areas happen to be embedded in tables?
    >
    > Dave
    >
    >
    > "Christian" <elephant@gmx.net> wrote in message
    > news:ekrjes$lgp6@flsun90netnews01.netobjects.com.. .
    >>I just installed NOF 10. In the text mode now I can only type very slow
    >>because any letter takes time to get in... The same the other way around
    >>in deleting letters, digits, sentences. What could be the reason for?
    >> Need your help...
    >> Thanks, Christian
    >>
    >>

    >
    >




  4. #4
    Scott
    Guest

    Default Re: Slow, slow, slow...

    Im having the same kind of problems with in tables, very slow! Dont try and
    copy and paste, it takes even longer.

    "Christian" <elephant@gmx.net> wrote in message
    news:ekrjes$lgp6@flsun90netnews01.netobjects.com.. .
    >I just installed NOF 10. In the text mode now I can only type very slow
    >because any letter takes time to get in... The same the other way around in
    >deleting letters, digits, sentences. What could be the reason for?
    > Need your help...
    > Thanks, Christian
    >
    >




  5. #5
    NetObjects Support
    Guest

    Default Re: Slow, slow, slow...

    Hi
    Can someone send a template to Support so we can take a look at your issue.
    So far we haven't been able to duplicate this issue with some of our test
    sites here.

    Thanks
    Scott

    "Christian" <elephant@gmx.net> wrote in message
    news:ekrjes$lgp6@flsun90netnews01.netobjects.com.. .
    >I just installed NOF 10. In the text mode now I can only type very slow
    >because any letter takes time to get in... The same the other way around in
    >deleting letters, digits, sentences. What could be the reason for?
    > Need your help...
    > Thanks, Christian
    >
    >




  6. #6
    Dave@Web by Design, Inc.
    Guest

    Default Re: Slow, slow, slow...

    Here is a one page template with a large table. The problem is obvious when
    you try to move the contents from one cell to another (depending on the
    speed of the PC, between 10-16 seconds). This same template has zero delay
    in v8 and v9.1

    Dave


    "NetObjects Support" <support@netobjects.com> wrote in message
    news:el1uhu$fig10@flsun90netnews01.netobjects.com. ..
    > Hi
    > Can someone send a template to Support so we can take a look at your
    > issue.
    > So far we haven't been able to duplicate this issue with some of our test
    > sites here.
    >
    > Thanks
    > Scott
    >
    > "Christian" <elephant@gmx.net> wrote in message
    > news:ekrjes$lgp6@flsun90netnews01.netobjects.com.. .
    >>I just installed NOF 10. In the text mode now I can only type very slow
    >>because any letter takes time to get in... The same the other way around
    >>in
    >>deleting letters, digits, sentences. What could be the reason for?
    >> Need your help...
    >> Thanks, Christian
    >>
    >>

    >
    >






  7. #7
    the other Chuck
    Guest

    Default Re: Slow, slow, slow...

    Hi Dave,

    Took your template and gave it a whirl. (Last Beta Build). No problems at
    all from a timing standpoint. I added two or three more rows to your table
    and pasted at will without much delay.

    To make things more interesting I copied the page and then pasted (10)
    additional Child pages of the same page and then proceeded to cut and paste
    additional table cells and rows on various child pages with almost instant
    results. For the heck of it I then published (chewed some serious CPU's),
    but compiled in about 1-1/2 to 2 minutes. Continued pasting more cells
    still with no problem.

    Must be something related to the way some machines are setup. I'm using
    WinXP Pro, 1gig of ram. Older machine (3 yrs) with a 3 Ghz Pentium 4
    chip. Not much to talk about these days. Wish I had an answer.

    the Other Chuck





    "Dave@Web by Design, Inc." <dave_no@spam_wbdi.net> wrote in message
    news:el20i4$g4c2@flsun90netnews01.netobjects.com.. .
    > Here is a one page template with a large table. The problem is obvious

    when
    > you try to move the contents from one cell to another (depending on the
    > speed of the PC, between 10-16 seconds). This same template has zero delay
    > in v8 and v9.1
    >
    > Dave
    >
    >
    > "NetObjects Support" <support@netobjects.com> wrote in message
    > news:el1uhu$fig10@flsun90netnews01.netobjects.com. ..
    > > Hi
    > > Can someone send a template to Support so we can take a look at your
    > > issue.
    > > So far we haven't been able to duplicate this issue with some of our

    test
    > > sites here.
    > >
    > > Thanks
    > > Scott
    > >
    > > "Christian" <elephant@gmx.net> wrote in message
    > > news:ekrjes$lgp6@flsun90netnews01.netobjects.com.. .
    > >>I just installed NOF 10. In the text mode now I can only type very slow
    > >>because any letter takes time to get in... The same the other way around
    > >>in
    > >>deleting letters, digits, sentences. What could be the reason for?
    > >> Need your help...
    > >> Thanks, Christian
    > >>
    > >>

    > >
    > >

    >
    >
    >




  8. #8
    Dave@Web by Design, Inc.
    Guest

    Default Re: Slow, slow, slow...

    I don't know either. Several other people tried this template and saw the
    same delays that I'm seeing. As for the machines I'm running on all I can
    say is that these two machines run this same template in v9.1 with no delays
    at all.

    My main machine is also running XP Pro with 1 gig of ram.

    I tried three different times to get someone from WSP to look at this, but
    have never received any responses. Oh well.....

    Dave


    "the other Chuck" <chuckv@NOSPAMvalentinetool.com> wrote in message
    news:el2gmh$huv1@flsun90netnews01.netobjects.com.. .
    > Hi Dave,
    >
    > Took your template and gave it a whirl. (Last Beta Build). No problems
    > at
    > all from a timing standpoint. I added two or three more rows to your
    > table
    > and pasted at will without much delay.
    >
    > To make things more interesting I copied the page and then pasted (10)
    > additional Child pages of the same page and then proceeded to cut and
    > paste
    > additional table cells and rows on various child pages with almost instant
    > results. For the heck of it I then published (chewed some serious
    > CPU's),
    > but compiled in about 1-1/2 to 2 minutes. Continued pasting more cells
    > still with no problem.
    >
    > Must be something related to the way some machines are setup. I'm using
    > WinXP Pro, 1gig of ram. Older machine (3 yrs) with a 3 Ghz Pentium 4
    > chip. Not much to talk about these days. Wish I had an answer.
    >
    > the Other Chuck
    >
    >
    >
    >
    >
    > "Dave@Web by Design, Inc." <dave_no@spam_wbdi.net> wrote in message
    > news:el20i4$g4c2@flsun90netnews01.netobjects.com.. .
    >> Here is a one page template with a large table. The problem is obvious

    > when
    >> you try to move the contents from one cell to another (depending on the
    >> speed of the PC, between 10-16 seconds). This same template has zero
    >> delay
    >> in v8 and v9.1
    >>
    >> Dave
    >>
    >>
    >> "NetObjects Support" <support@netobjects.com> wrote in message
    >> news:el1uhu$fig10@flsun90netnews01.netobjects.com. ..
    >> > Hi
    >> > Can someone send a template to Support so we can take a look at your
    >> > issue.
    >> > So far we haven't been able to duplicate this issue with some of our

    > test
    >> > sites here.
    >> >
    >> > Thanks
    >> > Scott
    >> >
    >> > "Christian" <elephant@gmx.net> wrote in message
    >> > news:ekrjes$lgp6@flsun90netnews01.netobjects.com.. .
    >> >>I just installed NOF 10. In the text mode now I can only type very slow
    >> >>because any letter takes time to get in... The same the other way
    >> >>around
    >> >>in
    >> >>deleting letters, digits, sentences. What could be the reason for?
    >> >> Need your help...
    >> >> Thanks, Christian
    >> >>
    >> >>
    >> >
    >> >

    >>
    >>
    >>

    >
    >




  9. #9
    Dave@Web by Design, Inc.
    Guest

    Default Re: Slow, slow, slow...

    Chuck,

    As a point of clarification, the slowdown does not occur if you do a
    copy/paste (Ctrl C, Ctrl V), it only happens when you drag the whole text
    area (which in this case includes an image) from one cell to another. Did
    you try this? On my fast machine this takes 8 seconds, on my slower one 16
    seconds.

    Dave


    "the other Chuck" <chuckv@NOSPAMvalentinetool.com> wrote in message
    news:el2gmh$huv1@flsun90netnews01.netobjects.com.. .
    > Hi Dave,
    >
    > Took your template and gave it a whirl. (Last Beta Build). No problems
    > at
    > all from a timing standpoint. I added two or three more rows to your
    > table
    > and pasted at will without much delay.
    >
    > To make things more interesting I copied the page and then pasted (10)
    > additional Child pages of the same page and then proceeded to cut and
    > paste
    > additional table cells and rows on various child pages with almost instant
    > results. For the heck of it I then published (chewed some serious
    > CPU's),
    > but compiled in about 1-1/2 to 2 minutes. Continued pasting more cells
    > still with no problem.
    >
    > Must be something related to the way some machines are setup. I'm using
    > WinXP Pro, 1gig of ram. Older machine (3 yrs) with a 3 Ghz Pentium 4
    > chip. Not much to talk about these days. Wish I had an answer.
    >
    > the Other Chuck
    >
    >
    >
    >
    >
    > "Dave@Web by Design, Inc." <dave_no@spam_wbdi.net> wrote in message
    > news:el20i4$g4c2@flsun90netnews01.netobjects.com.. .
    >> Here is a one page template with a large table. The problem is obvious

    > when
    >> you try to move the contents from one cell to another (depending on the
    >> speed of the PC, between 10-16 seconds). This same template has zero
    >> delay
    >> in v8 and v9.1
    >>
    >> Dave
    >>
    >>
    >> "NetObjects Support" <support@netobjects.com> wrote in message
    >> news:el1uhu$fig10@flsun90netnews01.netobjects.com. ..
    >> > Hi
    >> > Can someone send a template to Support so we can take a look at your
    >> > issue.
    >> > So far we haven't been able to duplicate this issue with some of our

    > test
    >> > sites here.
    >> >
    >> > Thanks
    >> > Scott
    >> >
    >> > "Christian" <elephant@gmx.net> wrote in message
    >> > news:ekrjes$lgp6@flsun90netnews01.netobjects.com.. .
    >> >>I just installed NOF 10. In the text mode now I can only type very slow
    >> >>because any letter takes time to get in... The same the other way
    >> >>around
    >> >>in
    >> >>deleting letters, digits, sentences. What could be the reason for?
    >> >> Need your help...
    >> >> Thanks, Christian
    >> >>
    >> >>
    >> >
    >> >

    >>
    >>
    >>

    >
    >




  10. #10
    the other Chuck
    Guest

    Default Re: Slow, slow, slow...

    Ahhhhh.... You're right.

    I was cutting & pasting. Using Drag & Drop I'm getting about 15 to 17
    seconds to do the same thing. Real strange. At least you have an option
    to Cut & Paste, (few more clicks), but well worth the time savings.

    tOC








    "Dave@Web by Design, Inc." <dave_no@spam_wbdi.net> wrote in message
    news:el2nbu$h6i5@flsun90netnews01.netobjects.com.. .
    > Chuck,
    >
    > As a point of clarification, the slowdown does not occur if you do a
    > copy/paste (Ctrl C, Ctrl V), it only happens when you drag the whole text
    > area (which in this case includes an image) from one cell to another. Did
    > you try this? On my fast machine this takes 8 seconds, on my slower one 16
    > seconds.
    >
    > Dave
    >
    >
    > "the other Chuck" <chuckv@NOSPAMvalentinetool.com> wrote in message
    > news:el2gmh$huv1@flsun90netnews01.netobjects.com.. .
    > > Hi Dave,
    > >
    > > Took your template and gave it a whirl. (Last Beta Build). No problems
    > > at
    > > all from a timing standpoint. I added two or three more rows to your
    > > table
    > > and pasted at will without much delay.
    > >
    > > To make things more interesting I copied the page and then pasted (10)
    > > additional Child pages of the same page and then proceeded to cut and
    > > paste
    > > additional table cells and rows on various child pages with almost

    instant
    > > results. For the heck of it I then published (chewed some serious
    > > CPU's),
    > > but compiled in about 1-1/2 to 2 minutes. Continued pasting more cells
    > > still with no problem.
    > >
    > > Must be something related to the way some machines are setup. I'm

    using
    > > WinXP Pro, 1gig of ram. Older machine (3 yrs) with a 3 Ghz Pentium 4
    > > chip. Not much to talk about these days. Wish I had an answer.
    > >
    > > the Other Chuck
    > >
    > >
    > >
    > >
    > >
    > > "Dave@Web by Design, Inc." <dave_no@spam_wbdi.net> wrote in message
    > > news:el20i4$g4c2@flsun90netnews01.netobjects.com.. .
    > >> Here is a one page template with a large table. The problem is obvious

    > > when
    > >> you try to move the contents from one cell to another (depending on the
    > >> speed of the PC, between 10-16 seconds). This same template has zero
    > >> delay
    > >> in v8 and v9.1
    > >>
    > >> Dave
    > >>
    > >>
    > >> "NetObjects Support" <support@netobjects.com> wrote in message
    > >> news:el1uhu$fig10@flsun90netnews01.netobjects.com. ..
    > >> > Hi
    > >> > Can someone send a template to Support so we can take a look at your
    > >> > issue.
    > >> > So far we haven't been able to duplicate this issue with some of our

    > > test
    > >> > sites here.
    > >> >
    > >> > Thanks
    > >> > Scott
    > >> >
    > >> > "Christian" <elephant@gmx.net> wrote in message
    > >> > news:ekrjes$lgp6@flsun90netnews01.netobjects.com.. .
    > >> >>I just installed NOF 10. In the text mode now I can only type very

    slow
    > >> >>because any letter takes time to get in... The same the other way
    > >> >>around
    > >> >>in
    > >> >>deleting letters, digits, sentences. What could be the reason for?
    > >> >> Need your help...
    > >> >> Thanks, Christian
    > >> >>
    > >> >>
    > >> >
    > >> >
    > >>
    > >>
    > >>

    > >
    > >

    >
    >




Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •