-
Slow, slow, slow...
I just installed NOF 10. In the text mode now I can only type very slow
because any letter takes time to get in... The same the other way around in
deleting letters, digits, sentences. What could be the reason for?
Need your help...
Thanks, Christian
-
Dave@Web by Design, Inc.
Guest
Re: Slow, slow, slow...
Do the text areas happen to be embedded in tables?
Dave
"Christian" <elephant@gmx.net> wrote in message
news:ekrjes$lgp6@flsun90netnews01.netobjects.com.. .
>I just installed NOF 10. In the text mode now I can only type very slow
>because any letter takes time to get in... The same the other way around in
>deleting letters, digits, sentences. What could be the reason for?
> Need your help...
> Thanks, Christian
>
>
-
Re: Slow, slow, slow...
No, they are not embedded in any tables - just "basic text fields"...
Christian
"Dave@Web by Design, Inc." <dave_no@spam_wbdi.net> schrieb im Newsbeitrag
news:eks6tp$ocl3@flsun90netnews01.netobjects.com.. .
> Do the text areas happen to be embedded in tables?
>
> Dave
>
>
> "Christian" <elephant@gmx.net> wrote in message
> news:ekrjes$lgp6@flsun90netnews01.netobjects.com.. .
>>I just installed NOF 10. In the text mode now I can only type very slow
>>because any letter takes time to get in... The same the other way around
>>in deleting letters, digits, sentences. What could be the reason for?
>> Need your help...
>> Thanks, Christian
>>
>>
>
>
-
Re: Slow, slow, slow...
Im having the same kind of problems with in tables, very slow! Dont try and
copy and paste, it takes even longer.
"Christian" <elephant@gmx.net> wrote in message
news:ekrjes$lgp6@flsun90netnews01.netobjects.com.. .
>I just installed NOF 10. In the text mode now I can only type very slow
>because any letter takes time to get in... The same the other way around in
>deleting letters, digits, sentences. What could be the reason for?
> Need your help...
> Thanks, Christian
>
>
-
Re: Slow, slow, slow...
Hi
Can someone send a template to Support so we can take a look at your issue.
So far we haven't been able to duplicate this issue with some of our test
sites here.
Thanks
Scott
"Christian" <elephant@gmx.net> wrote in message
news:ekrjes$lgp6@flsun90netnews01.netobjects.com.. .
>I just installed NOF 10. In the text mode now I can only type very slow
>because any letter takes time to get in... The same the other way around in
>deleting letters, digits, sentences. What could be the reason for?
> Need your help...
> Thanks, Christian
>
>
-
Dave@Web by Design, Inc.
Guest
Re: Slow, slow, slow...
Here is a one page template with a large table. The problem is obvious when
you try to move the contents from one cell to another (depending on the
speed of the PC, between 10-16 seconds). This same template has zero delay
in v8 and v9.1
Dave
"NetObjects Support" <support@netobjects.com> wrote in message
news:el1uhu$fig10@flsun90netnews01.netobjects.com. ..
> Hi
> Can someone send a template to Support so we can take a look at your
> issue.
> So far we haven't been able to duplicate this issue with some of our test
> sites here.
>
> Thanks
> Scott
>
> "Christian" <elephant@gmx.net> wrote in message
> news:ekrjes$lgp6@flsun90netnews01.netobjects.com.. .
>>I just installed NOF 10. In the text mode now I can only type very slow
>>because any letter takes time to get in... The same the other way around
>>in
>>deleting letters, digits, sentences. What could be the reason for?
>> Need your help...
>> Thanks, Christian
>>
>>
>
>
-
Re: Slow, slow, slow...
Hi Dave,
Took your template and gave it a whirl. (Last Beta Build). No problems at
all from a timing standpoint. I added two or three more rows to your table
and pasted at will without much delay.
To make things more interesting I copied the page and then pasted (10)
additional Child pages of the same page and then proceeded to cut and paste
additional table cells and rows on various child pages with almost instant
results. For the heck of it I then published (chewed some serious CPU's),
but compiled in about 1-1/2 to 2 minutes. Continued pasting more cells
still with no problem.
Must be something related to the way some machines are setup. I'm using
WinXP Pro, 1gig of ram. Older machine (3 yrs) with a 3 Ghz Pentium 4
chip. Not much to talk about these days. Wish I had an answer.
the Other Chuck
"Dave@Web by Design, Inc." <dave_no@spam_wbdi.net> wrote in message
news:el20i4$g4c2@flsun90netnews01.netobjects.com.. .
> Here is a one page template with a large table. The problem is obvious
when
> you try to move the contents from one cell to another (depending on the
> speed of the PC, between 10-16 seconds). This same template has zero delay
> in v8 and v9.1
>
> Dave
>
>
> "NetObjects Support" <support@netobjects.com> wrote in message
> news:el1uhu$fig10@flsun90netnews01.netobjects.com. ..
> > Hi
> > Can someone send a template to Support so we can take a look at your
> > issue.
> > So far we haven't been able to duplicate this issue with some of our
test
> > sites here.
> >
> > Thanks
> > Scott
> >
> > "Christian" <elephant@gmx.net> wrote in message
> > news:ekrjes$lgp6@flsun90netnews01.netobjects.com.. .
> >>I just installed NOF 10. In the text mode now I can only type very slow
> >>because any letter takes time to get in... The same the other way around
> >>in
> >>deleting letters, digits, sentences. What could be the reason for?
> >> Need your help...
> >> Thanks, Christian
> >>
> >>
> >
> >
>
>
>
-
Dave@Web by Design, Inc.
Guest
Re: Slow, slow, slow...
I don't know either. Several other people tried this template and saw the
same delays that I'm seeing. As for the machines I'm running on all I can
say is that these two machines run this same template in v9.1 with no delays
at all.
My main machine is also running XP Pro with 1 gig of ram.
I tried three different times to get someone from WSP to look at this, but
have never received any responses. Oh well.....
Dave
"the other Chuck" <chuckv@NOSPAMvalentinetool.com> wrote in message
news:el2gmh$huv1@flsun90netnews01.netobjects.com.. .
> Hi Dave,
>
> Took your template and gave it a whirl. (Last Beta Build). No problems
> at
> all from a timing standpoint. I added two or three more rows to your
> table
> and pasted at will without much delay.
>
> To make things more interesting I copied the page and then pasted (10)
> additional Child pages of the same page and then proceeded to cut and
> paste
> additional table cells and rows on various child pages with almost instant
> results. For the heck of it I then published (chewed some serious
> CPU's),
> but compiled in about 1-1/2 to 2 minutes. Continued pasting more cells
> still with no problem.
>
> Must be something related to the way some machines are setup. I'm using
> WinXP Pro, 1gig of ram. Older machine (3 yrs) with a 3 Ghz Pentium 4
> chip. Not much to talk about these days. Wish I had an answer.
>
> the Other Chuck
>
>
>
>
>
> "Dave@Web by Design, Inc." <dave_no@spam_wbdi.net> wrote in message
> news:el20i4$g4c2@flsun90netnews01.netobjects.com.. .
>> Here is a one page template with a large table. The problem is obvious
> when
>> you try to move the contents from one cell to another (depending on the
>> speed of the PC, between 10-16 seconds). This same template has zero
>> delay
>> in v8 and v9.1
>>
>> Dave
>>
>>
>> "NetObjects Support" <support@netobjects.com> wrote in message
>> news:el1uhu$fig10@flsun90netnews01.netobjects.com. ..
>> > Hi
>> > Can someone send a template to Support so we can take a look at your
>> > issue.
>> > So far we haven't been able to duplicate this issue with some of our
> test
>> > sites here.
>> >
>> > Thanks
>> > Scott
>> >
>> > "Christian" <elephant@gmx.net> wrote in message
>> > news:ekrjes$lgp6@flsun90netnews01.netobjects.com.. .
>> >>I just installed NOF 10. In the text mode now I can only type very slow
>> >>because any letter takes time to get in... The same the other way
>> >>around
>> >>in
>> >>deleting letters, digits, sentences. What could be the reason for?
>> >> Need your help...
>> >> Thanks, Christian
>> >>
>> >>
>> >
>> >
>>
>>
>>
>
>
-
Dave@Web by Design, Inc.
Guest
Re: Slow, slow, slow...
Chuck,
As a point of clarification, the slowdown does not occur if you do a
copy/paste (Ctrl C, Ctrl V), it only happens when you drag the whole text
area (which in this case includes an image) from one cell to another. Did
you try this? On my fast machine this takes 8 seconds, on my slower one 16
seconds.
Dave
"the other Chuck" <chuckv@NOSPAMvalentinetool.com> wrote in message
news:el2gmh$huv1@flsun90netnews01.netobjects.com.. .
> Hi Dave,
>
> Took your template and gave it a whirl. (Last Beta Build). No problems
> at
> all from a timing standpoint. I added two or three more rows to your
> table
> and pasted at will without much delay.
>
> To make things more interesting I copied the page and then pasted (10)
> additional Child pages of the same page and then proceeded to cut and
> paste
> additional table cells and rows on various child pages with almost instant
> results. For the heck of it I then published (chewed some serious
> CPU's),
> but compiled in about 1-1/2 to 2 minutes. Continued pasting more cells
> still with no problem.
>
> Must be something related to the way some machines are setup. I'm using
> WinXP Pro, 1gig of ram. Older machine (3 yrs) with a 3 Ghz Pentium 4
> chip. Not much to talk about these days. Wish I had an answer.
>
> the Other Chuck
>
>
>
>
>
> "Dave@Web by Design, Inc." <dave_no@spam_wbdi.net> wrote in message
> news:el20i4$g4c2@flsun90netnews01.netobjects.com.. .
>> Here is a one page template with a large table. The problem is obvious
> when
>> you try to move the contents from one cell to another (depending on the
>> speed of the PC, between 10-16 seconds). This same template has zero
>> delay
>> in v8 and v9.1
>>
>> Dave
>>
>>
>> "NetObjects Support" <support@netobjects.com> wrote in message
>> news:el1uhu$fig10@flsun90netnews01.netobjects.com. ..
>> > Hi
>> > Can someone send a template to Support so we can take a look at your
>> > issue.
>> > So far we haven't been able to duplicate this issue with some of our
> test
>> > sites here.
>> >
>> > Thanks
>> > Scott
>> >
>> > "Christian" <elephant@gmx.net> wrote in message
>> > news:ekrjes$lgp6@flsun90netnews01.netobjects.com.. .
>> >>I just installed NOF 10. In the text mode now I can only type very slow
>> >>because any letter takes time to get in... The same the other way
>> >>around
>> >>in
>> >>deleting letters, digits, sentences. What could be the reason for?
>> >> Need your help...
>> >> Thanks, Christian
>> >>
>> >>
>> >
>> >
>>
>>
>>
>
>
-
Re: Slow, slow, slow...
Ahhhhh.... You're right.
I was cutting & pasting. Using Drag & Drop I'm getting about 15 to 17
seconds to do the same thing. Real strange. At least you have an option
to Cut & Paste, (few more clicks), but well worth the time savings.
tOC
"Dave@Web by Design, Inc." <dave_no@spam_wbdi.net> wrote in message
news:el2nbu$h6i5@flsun90netnews01.netobjects.com.. .
> Chuck,
>
> As a point of clarification, the slowdown does not occur if you do a
> copy/paste (Ctrl C, Ctrl V), it only happens when you drag the whole text
> area (which in this case includes an image) from one cell to another. Did
> you try this? On my fast machine this takes 8 seconds, on my slower one 16
> seconds.
>
> Dave
>
>
> "the other Chuck" <chuckv@NOSPAMvalentinetool.com> wrote in message
> news:el2gmh$huv1@flsun90netnews01.netobjects.com.. .
> > Hi Dave,
> >
> > Took your template and gave it a whirl. (Last Beta Build). No problems
> > at
> > all from a timing standpoint. I added two or three more rows to your
> > table
> > and pasted at will without much delay.
> >
> > To make things more interesting I copied the page and then pasted (10)
> > additional Child pages of the same page and then proceeded to cut and
> > paste
> > additional table cells and rows on various child pages with almost
instant
> > results. For the heck of it I then published (chewed some serious
> > CPU's),
> > but compiled in about 1-1/2 to 2 minutes. Continued pasting more cells
> > still with no problem.
> >
> > Must be something related to the way some machines are setup. I'm
using
> > WinXP Pro, 1gig of ram. Older machine (3 yrs) with a 3 Ghz Pentium 4
> > chip. Not much to talk about these days. Wish I had an answer.
> >
> > the Other Chuck
> >
> >
> >
> >
> >
> > "Dave@Web by Design, Inc." <dave_no@spam_wbdi.net> wrote in message
> > news:el20i4$g4c2@flsun90netnews01.netobjects.com.. .
> >> Here is a one page template with a large table. The problem is obvious
> > when
> >> you try to move the contents from one cell to another (depending on the
> >> speed of the PC, between 10-16 seconds). This same template has zero
> >> delay
> >> in v8 and v9.1
> >>
> >> Dave
> >>
> >>
> >> "NetObjects Support" <support@netobjects.com> wrote in message
> >> news:el1uhu$fig10@flsun90netnews01.netobjects.com. ..
> >> > Hi
> >> > Can someone send a template to Support so we can take a look at your
> >> > issue.
> >> > So far we haven't been able to duplicate this issue with some of our
> > test
> >> > sites here.
> >> >
> >> > Thanks
> >> > Scott
> >> >
> >> > "Christian" <elephant@gmx.net> wrote in message
> >> > news:ekrjes$lgp6@flsun90netnews01.netobjects.com.. .
> >> >>I just installed NOF 10. In the text mode now I can only type very
slow
> >> >>because any letter takes time to get in... The same the other way
> >> >>around
> >> >>in
> >> >>deleting letters, digits, sentences. What could be the reason for?
> >> >> Need your help...
> >> >> Thanks, Christian
> >> >>
> >> >>
> >> >
> >> >
> >>
> >>
> >>
> >
> >
>
>
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules