Workspace problems

[Chris]

I've just upgraded from ver 9 to 10 and I'm having problem with workspace.
When NOF 10 starts I can't see the "Properties" and the other panels. I drag
and drop and finally all panels are visible the way I want. But when I
re-start NOF all these are lost and I have to do it again. Is it some
preference to "remember" the positions of the panels? I try to save the
workspace, nothing is saved. I try to load a workspace, I get the message
"Basic.xml is not found" What do I do wrong?
Pls advise

Chris

[Anton Strauss]

click save workspace as and type a name

then if you lose the workspace, simply reload it

also, make sure your most used property palettes are not set to autohide,
the pin should be facing vertical

--


Anton Strauss
www.videoproductions.com.au



"Chris" <chris@spacetravels.gr> wrote in message
news:fdt6nl$kjc1@flsun90netnews01.netobjects.com.. .
> I've just upgraded from ver 9 to 10 and I'm having problem with workspace.
> When NOF 10 starts I can't see the "Properties" and the other panels. I
drag
> and drop and finally all panels are visible the way I want. But when I
> re-start NOF all these are lost and I have to do it again. Is it some
> preference to "remember" the positions of the panels? I try to save the
> workspace, nothing is saved. I try to load a workspace, I get the message
> "Basic.xml is not found" What do I do wrong?
> Pls advise
>
> Chris
>
>

[Chris]

Anton,
Thanks for your answer. But I can't save the workspace (seems that NOF
cannot write to disk, eventhough the directory is read-write).
Another problem I face is that Its not possible to view Styles and I cannot
edit the one that I'm working on.
Do I have to re-install NOF ?

Chris





"Anton Strauss" <anton@will-not-reply.com> wrote in message
news:fdt7i5$kjc2@flsun90netnews01.netobjects.com.. .
> click save workspace as and type a name
>
> then if you lose the workspace, simply reload it
>
> also, make sure your most used property palettes are not set to autohide,
> the pin should be facing vertical
>
> --
>
>
> Anton Strauss
> www.videoproductions.com.au
>
>
>
> "Chris" <chris@spacetravels.gr> wrote in message
> news:fdt6nl$kjc1@flsun90netnews01.netobjects.com.. .
>> I've just upgraded from ver 9 to 10 and I'm having problem with
>> workspace.
>> When NOF 10 starts I can't see the "Properties" and the other panels. I
> drag
>> and drop and finally all panels are visible the way I want. But when I
>> re-start NOF all these are lost and I have to do it again. Is it some
>> preference to "remember" the positions of the panels? I try to save the
>> workspace, nothing is saved. I try to load a workspace, I get the message
>> "Basic.xml is not found" What do I do wrong?
>> Pls advise
>>
>> Chris
>>
>>
>
>

[Anton Strauss]

are you using XP Pro or Win2k?

if using Vista, I think you may experience a few problems? have you got the
latest update for your Nof?

the fact that you can't view styles leads me to believe that you may not be
running Nof as administrator or that your installation is corrupt, you can
uninstall/reinstall, should not take long and than apply the latest update
patch

--


Anton Strauss
www.videoproductions.com.au



"Chris" <chris@spacetravels.gr> wrote in message
news:fdthm2$lqf1@flsun90netnews01.netobjects.com.. .
> Anton,
> Thanks for your answer. But I can't save the workspace (seems that NOF
> cannot write to disk, eventhough the directory is read-write).
> Another problem I face is that Its not possible to view Styles and I
cannot
> edit the one that I'm working on.
> Do I have to re-install NOF ?
>
> Chris
>
>
>
>
>
> "Anton Strauss" <anton@will-not-reply.com> wrote in message
> news:fdt7i5$kjc2@flsun90netnews01.netobjects.com.. .
> > click save workspace as and type a name
> >
> > then if you lose the workspace, simply reload it
> >
> > also, make sure your most used property palettes are not set to
autohide,
> > the pin should be facing vertical
> >
> > --
> >
> >
> > Anton Strauss
> > www.videoproductions.com.au
> >
> >
> >
> > "Chris" <chris@spacetravels.gr> wrote in message
> > news:fdt6nl$kjc1@flsun90netnews01.netobjects.com.. .
> >> I've just upgraded from ver 9 to 10 and I'm having problem with
> >> workspace.
> >> When NOF 10 starts I can't see the "Properties" and the other panels. I
> > drag
> >> and drop and finally all panels are visible the way I want. But when I
> >> re-start NOF all these are lost and I have to do it again. Is it some
> >> preference to "remember" the positions of the panels? I try to save the
> >> workspace, nothing is saved. I try to load a workspace, I get the
message
> >> "Basic.xml is not found" What do I do wrong?
> >> Pls advise
> >>
> >> Chris
> >>
> >>
> >
> >
>
>

[Chris]

Anton,
I use WinXP.
I uninstalled and reinstalled NOF 10 but the problem remains. When I go to
Styles section I only see a orange area and the Style buttons are ghosted.
Also when I exit NOF I get "Microsoft Visual C++ Runtime library "error".

Chris


"Anton Strauss" <anton@will-not-reply.com> wrote in message
news:fdti8e$msu1@flsun90netnews01.netobjects.com.. .
> are you using XP Pro or Win2k?
>
> if using Vista, I think you may experience a few problems? have you got
> the
> latest update for your Nof?
>
> the fact that you can't view styles leads me to believe that you may not
> be
> running Nof as administrator or that your installation is corrupt, you can
> uninstall/reinstall, should not take long and than apply the latest update
> patch
>
> --
>
>
> Anton Strauss
> www.videoproductions.com.au
>
>
>
> "Chris" <chris@spacetravels.gr> wrote in message
> news:fdthm2$lqf1@flsun90netnews01.netobjects.com.. .
>> Anton,
>> Thanks for your answer. But I can't save the workspace (seems that NOF
>> cannot write to disk, eventhough the directory is read-write).
>> Another problem I face is that Its not possible to view Styles and I
> cannot
>> edit the one that I'm working on.
>> Do I have to re-install NOF ?
>>
>> Chris
>>
>>
>>
>>
>>
>> "Anton Strauss" <anton@will-not-reply.com> wrote in message
>> news:fdt7i5$kjc2@flsun90netnews01.netobjects.com.. .
>> > click save workspace as and type a name
>> >
>> > then if you lose the workspace, simply reload it
>> >
>> > also, make sure your most used property palettes are not set to
> autohide,
>> > the pin should be facing vertical
>> >
>> > --
>> >
>> >
>> > Anton Strauss
>> > www.videoproductions.com.au
>> >
>> >
>> >
>> > "Chris" <chris@spacetravels.gr> wrote in message
>> > news:fdt6nl$kjc1@flsun90netnews01.netobjects.com.. .
>> >> I've just upgraded from ver 9 to 10 and I'm having problem with
>> >> workspace.
>> >> When NOF 10 starts I can't see the "Properties" and the other panels.
>> >> I
>> > drag
>> >> and drop and finally all panels are visible the way I want. But when I
>> >> re-start NOF all these are lost and I have to do it again. Is it some
>> >> preference to "remember" the positions of the panels? I try to save
>> >> the
>> >> workspace, nothing is saved. I try to load a workspace, I get the
> message
>> >> "Basic.xml is not found" What do I do wrong?
>> >> Pls advise
>> >>
>> >> Chris
>> >>
>> >>
>> >
>> >
>>
>>
>
>

[Chris]

Anton, i have NOF 9 installed also. Is it possible to cause these problems?

Chris



"Chris" <chris@spacetravels.gr> wrote in message
news:fdvhen$gn1@flsun90netnews01.netobjects.com...
> Anton,
> I use WinXP.
> I uninstalled and reinstalled NOF 10 but the problem remains. When I go to
> Styles section I only see a orange area and the Style buttons are ghosted.
> Also when I exit NOF I get "Microsoft Visual C++ Runtime library "error".
>
> Chris
>
>
> "Anton Strauss" <anton@will-not-reply.com> wrote in message
> news:fdti8e$msu1@flsun90netnews01.netobjects.com.. .
>> are you using XP Pro or Win2k?
>>
>> if using Vista, I think you may experience a few problems? have you got
>> the
>> latest update for your Nof?
>>
>> the fact that you can't view styles leads me to believe that you may not
>> be
>> running Nof as administrator or that your installation is corrupt, you
>> can
>> uninstall/reinstall, should not take long and than apply the latest
>> update
>> patch
>>
>> --
>>
>>
>> Anton Strauss
>> www.videoproductions.com.au
>>
>>
>>
>> "Chris" <chris@spacetravels.gr> wrote in message
>> news:fdthm2$lqf1@flsun90netnews01.netobjects.com.. .
>>> Anton,
>>> Thanks for your answer. But I can't save the workspace (seems that NOF
>>> cannot write to disk, eventhough the directory is read-write).
>>> Another problem I face is that Its not possible to view Styles and I
>> cannot
>>> edit the one that I'm working on.
>>> Do I have to re-install NOF ?
>>>
>>> Chris
>>>
>>>
>>>
>>>
>>>
>>> "Anton Strauss" <anton@will-not-reply.com> wrote in message
>>> news:fdt7i5$kjc2@flsun90netnews01.netobjects.com.. .
>>> > click save workspace as and type a name
>>> >
>>> > then if you lose the workspace, simply reload it
>>> >
>>> > also, make sure your most used property palettes are not set to
>> autohide,
>>> > the pin should be facing vertical
>>> >
>>> > --
>>> >
>>> >
>>> > Anton Strauss
>>> > www.videoproductions.com.au
>>> >
>>> >
>>> >
>>> > "Chris" <chris@spacetravels.gr> wrote in message
>>> > news:fdt6nl$kjc1@flsun90netnews01.netobjects.com.. .
>>> >> I've just upgraded from ver 9 to 10 and I'm having problem with
>>> >> workspace.
>>> >> When NOF 10 starts I can't see the "Properties" and the other panels.
>>> >> I
>>> > drag
>>> >> and drop and finally all panels are visible the way I want. But when
>>> >> I
>>> >> re-start NOF all these are lost and I have to do it again. Is it some
>>> >> preference to "remember" the positions of the panels? I try to save
>>> >> the
>>> >> workspace, nothing is saved. I try to load a workspace, I get the
>> message
>>> >> "Basic.xml is not found" What do I do wrong?
>>> >> Pls advise
>>> >>
>>> >> Chris
>>> >>
>>> >>
>>> >
>>> >
>>>
>>>
>>
>>
>
>

[Anton Strauss]

no, I also have Nof9 installed without problems

when you go to style view, is the style unlocked so it can be edited? see
attached

--


Anton Strauss
www.videoproductions.com.au

[Chris]

Anton I cant see anything like the normal "Styles" panels. Attached you can
see what the Styles interface looks like. Pretty awfull.


Chris



"Anton Strauss" <anton@will-not-reply.com> wrote in message
news:fe018d$gn3@flsun90netnews01.netobjects.com...
> no, I also have Nof9 installed without problems
>
> when you go to style view, is the style unlocked so it can be edited? see
> attached
>
> --
>
>
> Anton Strauss
> www.videoproductions.com.au
>
>
>

[Anton Strauss]

that looks bad, almost as if IE6 or higher is not present on PC

what is your default browser?

--


Anton Strauss
www.videoproductions.com.au

[Chris]

ÉÅ7



"Anton Strauss" <anton@will-not-reply.com> wrote in message
news:fe2p1n$au82@flsun90netnews01.netobjects.com.. .
> that looks bad, almost as if IE6 or higher is not present on PC
>
> what is your default browser?
>
> --
>
>
> Anton Strauss
> www.videoproductions.com.au
>
>