-
"fly out" menu and Fire Fox
Hello group,
Regards my previous post about "fly out" menus not working when running Fire
fox at: www.affiliatecommandcenter.com/sculptor_3.html I.E. Just roll over
white submenu to the left, under "Products To Promote" to test.
I had NO support check it out and they say it is working okay for them, they
even sent me a screen capture.
So, would a couple of the group mind checking out
www.affiliatecommandcenter.com/sculptor_3.html in Fire fox and let me know
if the "fly out" menus are working for you.
So, just go over to URL above and mouse over the white submenu under
"Products To Promote"..
Thanks for your time, this is most appreciated.
Regards
Jeff
-
Re: "fly out" menu and Fire Fox
Looks and works okay on my side Jeff...
-
FF 2.0.0.14
-
Bert
"Jeff Staniforth" <jls@affirmware.com.au> wrote in message
news:fvo70k$emu7@flsun90netnews01.netobjects.com.. .
> Hello group,
>
> Regards my previous post about "fly out" menus not working when running
> Fire fox at: www.affiliatecommandcenter.com/sculptor_3.html I.E. Just
> roll over white submenu to the left, under "Products To Promote" to test.
>
> I had NO support check it out and they say it is working okay for them,
> they even sent me a screen capture.
>
> So, would a couple of the group mind checking out
> www.affiliatecommandcenter.com/sculptor_3.html in Fire fox and let me know
> if the "fly out" menus are working for you.
>
> So, just go over to URL above and mouse over the white submenu under
> "Products To Promote"..
>
> Thanks for your time, this is most appreciated.
>
> Regards
> Jeff
-
Re: "fly out" menu and Fire Fox
Same version of FF - works perfectly - although the menus aren't quite white
(slightly greenish) - the flyouts are white though.
Garret Mott
Auto-Mate Software www.automatesoftware.com
Northeast DataFlex Consortium www.nedataflex.com
"Jeff Staniforth" <jls@affirmware.com.au> wrote in message
news:fvo70k$emu7@flsun90netnews01.netobjects.com.. .
> Hello group,
>
> Regards my previous post about "fly out" menus not working when running
> Fire fox at: www.affiliatecommandcenter.com/sculptor_3.html I.E. Just
> roll over white submenu to the left, under "Products To Promote" to test.
>
> I had NO support check it out and they say it is working okay for them,
> they even sent me a screen capture.
>
> So, would a couple of the group mind checking out
> www.affiliatecommandcenter.com/sculptor_3.html in Fire fox and let me know
> if the "fly out" menus are working for you.
>
> So, just go over to URL above and mouse over the white submenu under
> "Products To Promote"..
>
> Thanks for your time, this is most appreciated.
>
> Regards
> Jeff
-
Re: "fly out" menu and Fire Fox
Hi Garret,
> Same version of FF - works perfectly - although the menus aren't quite
> white (slightly greenish) - the flyouts are white though.
Thanks for FF confirm, I guess I have something wrong with my FF.
Also, NetObjects is using the same graphic to create both fly out and
submenu, so strange you are getting a green cast.
Can you check in IE ?
Regards
Jeff
>
> Garret Mott
>
> Auto-Mate Software www.automatesoftware.com
> Northeast DataFlex Consortium www.nedataflex.com
>
> "Jeff Staniforth" <jls@affirmware.com.au> wrote in message
> news:fvo70k$emu7@flsun90netnews01.netobjects.com.. .
>> Hello group,
>>
>> Regards my previous post about "fly out" menus not working when running
>> Fire fox at: www.affiliatecommandcenter.com/sculptor_3.html I.E. Just
>> roll over white submenu to the left, under "Products To Promote" to test.
>>
>> I had NO support check it out and they say it is working okay for them,
>> they even sent me a screen capture.
>>
>> So, would a couple of the group mind checking out
>> www.affiliatecommandcenter.com/sculptor_3.html in Fire fox and let me
>> know if the "fly out" menus are working for you.
>>
>> So, just go over to URL above and mouse over the white submenu under
>> "Products To Promote"..
>>
>> Thanks for your time, this is most appreciated.
>>
>> Regards
>> Jeff
>
>
-
Re: "fly out" menu and Fire Fox
Hi Jeff -
Green was wrong. Too long in front of the computer!
IE is white, as expected (IE). In FF, if I hover over a button, it turns
bluish (pale) & stays that way. Not awful or anything like that - just
different than IE.
See the attached (FF) where I moved the mouse over the first 2 buttons.
Garret Mott
Auto-Mate Software www.automatesoftware.com
Northeast DataFlex Consortium www.nedataflex.com
"Jeff Staniforth" <jls@affirmware.com.au> wrote in message
news:fvoehr$gng2@flsun90netnews01.netobjects.com.. .
> Hi Garret,
>
>
>> Same version of FF - works perfectly - although the menus aren't quite
>> white (slightly greenish) - the flyouts are white though.
>
> Thanks for FF confirm, I guess I have something wrong with my FF.
>
> Also, NetObjects is using the same graphic to create both fly out and
> submenu, so strange you are getting a green cast.
>
> Can you check in IE ?
>
> Regards
> Jeff
>
>
>
>
>>
>> Garret Mott
>>
>> Auto-Mate Software www.automatesoftware.com
>> Northeast DataFlex Consortium www.nedataflex.com
>>
>> "Jeff Staniforth" <jls@affirmware.com.au> wrote in message
>> news:fvo70k$emu7@flsun90netnews01.netobjects.com.. .
>>> Hello group,
>>>
>>> Regards my previous post about "fly out" menus not working when running
>>> Fire fox at: www.affiliatecommandcenter.com/sculptor_3.html I.E. Just
>>> roll over white submenu to the left, under "Products To Promote" to
>>> test.
>>>
>>> I had NO support check it out and they say it is working okay for them,
>>> they even sent me a screen capture.
>>>
>>> So, would a couple of the group mind checking out
>>> www.affiliatecommandcenter.com/sculptor_3.html in Fire fox and let me
>>> know if the "fly out" menus are working for you.
>>>
>>> So, just go over to URL above and mouse over the white submenu under
>>> "Products To Promote"..
>>>
>>> Thanks for your time, this is most appreciated.
>>>
>>> Regards
>>> Jeff
>>
>>
>
-
Re: "fly out" menu and Fire Fox
Hi Garret,
> Green was wrong. Too long in front of the computer!
I think we all know how that can happen.
> IE is white, as expected (IE). In FF, if I hover over a button, it turns
> bluish (pale) & stays that way. Not awful or anything like that - just
> different than IE.
Yes, that is how it is meant to work/look.
> See the attached (FF) where I moved the mouse over the first 2 buttons.
Yes, I noticed that in FF. I thinks its a re-draw thing, It just sort of
gets stuck. Not sure if there is a solution to it :-(
And, still not sure why I can't get fly out to work in FF... but as long as
it works for everyone else I can live with it.
Thanks for your help Garret, and Bert, most appreciated.
Regards
Jeff
> Garret Mott
>
> Auto-Mate Software www.automatesoftware.com
> Northeast DataFlex Consortium www.nedataflex.com
>
> "Jeff Staniforth" <jls@affirmware.com.au> wrote in message
> news:fvoehr$gng2@flsun90netnews01.netobjects.com.. .
>> Hi Garret,
>>
>>
>>> Same version of FF - works perfectly - although the menus aren't quite
>>> white (slightly greenish) - the flyouts are white though.
>>
>> Thanks for FF confirm, I guess I have something wrong with my FF.
>>
>> Also, NetObjects is using the same graphic to create both fly out and
>> submenu, so strange you are getting a green cast.
>>
>> Can you check in IE ?
>>
>> Regards
>> Jeff
>>
>>
>>
>>
>>>
>>> Garret Mott
>>>
>>> Auto-Mate Software www.automatesoftware.com
>>> Northeast DataFlex Consortium www.nedataflex.com
>>>
>>> "Jeff Staniforth" <jls@affirmware.com.au> wrote in message
>>> news:fvo70k$emu7@flsun90netnews01.netobjects.com.. .
>>>> Hello group,
>>>>
>>>> Regards my previous post about "fly out" menus not working when running
>>>> Fire fox at: www.affiliatecommandcenter.com/sculptor_3.html I.E. Just
>>>> roll over white submenu to the left, under "Products To Promote" to
>>>> test.
>>>>
>>>> I had NO support check it out and they say it is working okay for them,
>>>> they even sent me a screen capture.
>>>>
>>>> So, would a couple of the group mind checking out
>>>> www.affiliatecommandcenter.com/sculptor_3.html in Fire fox and let me
>>>> know if the "fly out" menus are working for you.
>>>>
>>>> So, just go over to URL above and mouse over the white submenu under
>>>> "Products To Promote"..
>>>>
>>>> Thanks for your time, this is most appreciated.
>>>>
>>>> Regards
>>>> Jeff
>>>
>>>
>>
>
>
>
-
Re: "fly out" menu and Fire Fox
Hi Jeff-
One thing with FF is that it's cache is pretty "sticky". Go to another site
(not anywhere on yours), empty your cache, close & restart FF & then go to
your site.
Maybe that'll help...
Garret
"If you can't fix it, get a bigger hammer"
-
Re: "fly out" menu and Fire Fox
Jeff Staniforth wrote:
> Hello group,
>
> Regards my previous post about "fly out" menus not working when running
> Fire fox at: www.affiliatecommandcenter.com/sculptor_3.html I.E. Just
> roll over white submenu to the left, under "Products To Promote" to test.
>
> I had NO support check it out and they say it is working okay for them,
> they even sent me a screen capture.
>
> So, would a couple of the group mind checking out
> www.affiliatecommandcenter.com/sculptor_3.html in Fire fox and let me
> know if the "fly out" menus are working for you.
>
> So, just go over to URL above and mouse over the white submenu under
> "Products To Promote"..
>
> Thanks for your time, this is most appreciated.
>
> Regards
> Jeff
Hi just tried it out for you with FF and the fly-outs work fine.
Regards
Kirk
-
Re: "fly out" menu and Fire Fox
Hi Kirk,
Thanks for feedback, sounds like everything is okay in FF now.
For me, I had to clear the cache to get the fly out to work... strange.
Regards
Jeff
"Kirk J Evans" <kirkjevans@gmail.com> wrote in message
news:fvpf1i$j319@flsun90netnews01.netobjects.com.. .
> Jeff Staniforth wrote:
>> Hello group,
>>
>> Regards my previous post about "fly out" menus not working when running
>> Fire fox at: www.affiliatecommandcenter.com/sculptor_3.html I.E. Just
>> roll over white submenu to the left, under "Products To Promote" to test.
>>
>> I had NO support check it out and they say it is working okay for them,
>> they even sent me a screen capture.
>>
>> So, would a couple of the group mind checking out
>> www.affiliatecommandcenter.com/sculptor_3.html in Fire fox and let me
>> know if the "fly out" menus are working for you.
>>
>> So, just go over to URL above and mouse over the white submenu under
>> "Products To Promote"..
>>
>> Thanks for your time, this is most appreciated.
>>
>> Regards
>> Jeff
>
> Hi just tried it out for you with FF and the fly-outs work fine.
>
> Regards
>
> Kirk
-
script errors in NOF 10 w/Vista on any Style wile in Style View
On vista now with NOF 10 (xp laptop crashed) and now when I access Style
view I get stuck in repetive lop of script errors and the error text itself
says things like "object expected" "navvarcoll not found", etc, I can
publish and use remainder of product (or at least what I've used since
switching to new laptop. This happens with any style and whether I have
set to use IE or Firefox for preview. Am hoping someone has hit and
resolved this as I have 2 tickets open with NOF support which so far they
have ignored. Guess that's the "FREE" support... hmmmm
Thanks!!
Andre
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules