-
"fly out" menu and Fire Fox
Hello group,
Regards my previous post about "fly out" menus not working when running Fire
fox at: www.affiliatecommandcenter.com/sculptor_3.html I.E. Just roll over
white submenu to the left, under "Products To Promote" to test.
I had NO support check it out and they say it is working okay for them, they
even sent me a screen capture.
So, would a couple of the group mind checking out
www.affiliatecommandcenter.com/sculptor_3.html in Fire fox and let me know
if the "fly out" menus are working for you.
So, just go over to URL above and mouse over the white submenu under
"Products To Promote"..
Thanks for your time, this is most appreciated.
Regards
Jeff
-
Re: "fly out" menu and Fire Fox
Looks and works okay on my side Jeff...
-
FF 2.0.0.14
-
Bert
"Jeff Staniforth" <jls@affirmware.com.au> wrote in message
news:fvo70k$emu7@flsun90netnews01.netobjects.com.. .
> Hello group,
>
> Regards my previous post about "fly out" menus not working when running
> Fire fox at: www.affiliatecommandcenter.com/sculptor_3.html I.E. Just
> roll over white submenu to the left, under "Products To Promote" to test.
>
> I had NO support check it out and they say it is working okay for them,
> they even sent me a screen capture.
>
> So, would a couple of the group mind checking out
> www.affiliatecommandcenter.com/sculptor_3.html in Fire fox and let me know
> if the "fly out" menus are working for you.
>
> So, just go over to URL above and mouse over the white submenu under
> "Products To Promote"..
>
> Thanks for your time, this is most appreciated.
>
> Regards
> Jeff
-
Re: "fly out" menu and Fire Fox
Same version of FF - works perfectly - although the menus aren't quite white
(slightly greenish) - the flyouts are white though.
Garret Mott
Auto-Mate Software www.automatesoftware.com
Northeast DataFlex Consortium www.nedataflex.com
"Jeff Staniforth" <jls@affirmware.com.au> wrote in message
news:fvo70k$emu7@flsun90netnews01.netobjects.com.. .
> Hello group,
>
> Regards my previous post about "fly out" menus not working when running
> Fire fox at: www.affiliatecommandcenter.com/sculptor_3.html I.E. Just
> roll over white submenu to the left, under "Products To Promote" to test.
>
> I had NO support check it out and they say it is working okay for them,
> they even sent me a screen capture.
>
> So, would a couple of the group mind checking out
> www.affiliatecommandcenter.com/sculptor_3.html in Fire fox and let me know
> if the "fly out" menus are working for you.
>
> So, just go over to URL above and mouse over the white submenu under
> "Products To Promote"..
>
> Thanks for your time, this is most appreciated.
>
> Regards
> Jeff
-
Re: "fly out" menu and Fire Fox
Hi Garret,
> Same version of FF - works perfectly - although the menus aren't quite
> white (slightly greenish) - the flyouts are white though.
Thanks for FF confirm, I guess I have something wrong with my FF.
Also, NetObjects is using the same graphic to create both fly out and
submenu, so strange you are getting a green cast.
Can you check in IE ?
Regards
Jeff
>
> Garret Mott
>
> Auto-Mate Software www.automatesoftware.com
> Northeast DataFlex Consortium www.nedataflex.com
>
> "Jeff Staniforth" <jls@affirmware.com.au> wrote in message
> news:fvo70k$emu7@flsun90netnews01.netobjects.com.. .
>> Hello group,
>>
>> Regards my previous post about "fly out" menus not working when running
>> Fire fox at: www.affiliatecommandcenter.com/sculptor_3.html I.E. Just
>> roll over white submenu to the left, under "Products To Promote" to test.
>>
>> I had NO support check it out and they say it is working okay for them,
>> they even sent me a screen capture.
>>
>> So, would a couple of the group mind checking out
>> www.affiliatecommandcenter.com/sculptor_3.html in Fire fox and let me
>> know if the "fly out" menus are working for you.
>>
>> So, just go over to URL above and mouse over the white submenu under
>> "Products To Promote"..
>>
>> Thanks for your time, this is most appreciated.
>>
>> Regards
>> Jeff
>
>
-
Re: "fly out" menu and Fire Fox
Hi Jeff -
Green was wrong. Too long in front of the computer!
IE is white, as expected (IE). In FF, if I hover over a button, it turns
bluish (pale) & stays that way. Not awful or anything like that - just
different than IE.
See the attached (FF) where I moved the mouse over the first 2 buttons.
Garret Mott
Auto-Mate Software www.automatesoftware.com
Northeast DataFlex Consortium www.nedataflex.com
"Jeff Staniforth" <jls@affirmware.com.au> wrote in message
news:fvoehr$gng2@flsun90netnews01.netobjects.com.. .
> Hi Garret,
>
>
>> Same version of FF - works perfectly - although the menus aren't quite
>> white (slightly greenish) - the flyouts are white though.
>
> Thanks for FF confirm, I guess I have something wrong with my FF.
>
> Also, NetObjects is using the same graphic to create both fly out and
> submenu, so strange you are getting a green cast.
>
> Can you check in IE ?
>
> Regards
> Jeff
>
>
>
>
>>
>> Garret Mott
>>
>> Auto-Mate Software www.automatesoftware.com
>> Northeast DataFlex Consortium www.nedataflex.com
>>
>> "Jeff Staniforth" <jls@affirmware.com.au> wrote in message
>> news:fvo70k$emu7@flsun90netnews01.netobjects.com.. .
>>> Hello group,
>>>
>>> Regards my previous post about "fly out" menus not working when running
>>> Fire fox at: www.affiliatecommandcenter.com/sculptor_3.html I.E. Just
>>> roll over white submenu to the left, under "Products To Promote" to
>>> test.
>>>
>>> I had NO support check it out and they say it is working okay for them,
>>> they even sent me a screen capture.
>>>
>>> So, would a couple of the group mind checking out
>>> www.affiliatecommandcenter.com/sculptor_3.html in Fire fox and let me
>>> know if the "fly out" menus are working for you.
>>>
>>> So, just go over to URL above and mouse over the white submenu under
>>> "Products To Promote"..
>>>
>>> Thanks for your time, this is most appreciated.
>>>
>>> Regards
>>> Jeff
>>
>>
>
-
Re: "fly out" menu and Fire Fox
Hi Garret,
> Green was wrong. Too long in front of the computer!
I think we all know how that can happen.
> IE is white, as expected (IE). In FF, if I hover over a button, it turns
> bluish (pale) & stays that way. Not awful or anything like that - just
> different than IE.
Yes, that is how it is meant to work/look.
> See the attached (FF) where I moved the mouse over the first 2 buttons.
Yes, I noticed that in FF. I thinks its a re-draw thing, It just sort of
gets stuck. Not sure if there is a solution to it :-(
And, still not sure why I can't get fly out to work in FF... but as long as
it works for everyone else I can live with it.
Thanks for your help Garret, and Bert, most appreciated.
Regards
Jeff
> Garret Mott
>
> Auto-Mate Software www.automatesoftware.com
> Northeast DataFlex Consortium www.nedataflex.com
>
> "Jeff Staniforth" <jls@affirmware.com.au> wrote in message
> news:fvoehr$gng2@flsun90netnews01.netobjects.com.. .
>> Hi Garret,
>>
>>
>>> Same version of FF - works perfectly - although the menus aren't quite
>>> white (slightly greenish) - the flyouts are white though.
>>
>> Thanks for FF confirm, I guess I have something wrong with my FF.
>>
>> Also, NetObjects is using the same graphic to create both fly out and
>> submenu, so strange you are getting a green cast.
>>
>> Can you check in IE ?
>>
>> Regards
>> Jeff
>>
>>
>>
>>
>>>
>>> Garret Mott
>>>
>>> Auto-Mate Software www.automatesoftware.com
>>> Northeast DataFlex Consortium www.nedataflex.com
>>>
>>> "Jeff Staniforth" <jls@affirmware.com.au> wrote in message
>>> news:fvo70k$emu7@flsun90netnews01.netobjects.com.. .
>>>> Hello group,
>>>>
>>>> Regards my previous post about "fly out" menus not working when running
>>>> Fire fox at: www.affiliatecommandcenter.com/sculptor_3.html I.E. Just
>>>> roll over white submenu to the left, under "Products To Promote" to
>>>> test.
>>>>
>>>> I had NO support check it out and they say it is working okay for them,
>>>> they even sent me a screen capture.
>>>>
>>>> So, would a couple of the group mind checking out
>>>> www.affiliatecommandcenter.com/sculptor_3.html in Fire fox and let me
>>>> know if the "fly out" menus are working for you.
>>>>
>>>> So, just go over to URL above and mouse over the white submenu under
>>>> "Products To Promote"..
>>>>
>>>> Thanks for your time, this is most appreciated.
>>>>
>>>> Regards
>>>> Jeff
>>>
>>>
>>
>
>
>
-
Re: "fly out" menu and Fire Fox
Hi Jeff-
One thing with FF is that it's cache is pretty "sticky". Go to another site
(not anywhere on yours), empty your cache, close & restart FF & then go to
your site.
Maybe that'll help...
Garret
"If you can't fix it, get a bigger hammer"
-
Re: "fly out" menu and Fire Fox
Hi Garret,
> One thing with FF is that it's cache is pretty "sticky". Go to another
> site (not anywhere on yours), empty your cache, close & restart FF & then
> go to your site.
That worked... I feel like such a drip :-(
I was doing a Ctrl Re-Load Current Page, but the Clear Cache fixed it.
Thanks, now I can move ahead.
Still one other issue though. In FF It does not reset the default button
state after the mose over.
That is, if I mouse over the whole list of Sculptor 3 products, the button
goes light blue, but it does not return to default state of white.
Strange...
Regards
Jeff
>
> Maybe that'll help...
>
> Garret
>
> "If you can't fix it, get a bigger hammer"
>
>
-
Re: "fly out" menu and Fire Fox
> That is, if I mouse over the whole list of Sculptor 3 products, the button
> goes light blue, but it does not return to default state of white.
Confirmed. But move the mouse to the right, over the flyout, and them back
again, and move down the list. Then it proceeds to uncolour them again.
Looks like a bug in FF to me.
It works fine in IE, Opera and Safari.
SteveT
-
Re: "fly out" menu and Fire Fox
Hi Steve,
Thanks for confirmation.
In FF, once I mouse over I have to reload the page to get the button state
back to the normal default state, or select one of the fly out options.
Yes, I would say its a bug.
Thanks Steve/everyone for feedback.
Most appreciated.
Regards
Jeff
"Steve Thackery" <nobody@nowhere.com> wrote in message
news:fvp8s3$j314@flsun90netnews01.netobjects.com.. .
>> That is, if I mouse over the whole list of Sculptor 3 products, the
>> button goes light blue, but it does not return to default state of white.
>
> Confirmed. But move the mouse to the right, over the flyout, and them
> back again, and move down the list. Then it proceeds to uncolour them
> again. Looks like a bug in FF to me.
>
> It works fine in IE, Opera and Safari.
>
> SteveT
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules