-
Chuck «BeyondFusion»
Guest
Re: Fusion 9 Install Problems
Simon,
Isn't that what I told you to do a couple of posts back? (-;
--
Chuck Joslin - Team NetObjects
BeyondFusion.com - Your Fusion Community
www.beyondfusion.com
Fusion Wish List - www.beyondfusion.com/wish
Register domain names at www.awavedomains.com
"Simon Ruckledge" <simon@studio49online.com> wrote in message
news:dl2fip$rin6@news01.netobjects.com...
> Got a message back from fusion help. I skipped using the self extract and
> extracted them myself to afolder then run the install, now installed and
> no problems. looking forward to getting in and taking a look
>
> Thanks
> Simon
>
>
> "Simon Ruckledge" <simon@studio49online.com> wrote in message
> news:dl0vvf$qhr17@news01.netobjects.com...
>> No Joy as such, I managed to egt it on my old computer but im migrating
>> toa
>> new faster machine. Its running xp profffesional. It has version 7 on it,
>> upgrade 8 and trying to upgrade 9. same messages as before. This old comp
>> runs windows 98se
>>
>> Thanks
>>
>>
>> "Chuck «BeyondFusion»" <chuck@beyond-nospam-fusion.com> wrote in message
>> news:dl0sqg$qi64@news01.netobjects.com...
>>> Reboot so you'll hopefully kill off any setup processes that've already
>>> started and failed.
>>>
>>> Then, make a folder and extracting the setup files into it.
>>>
>>> Then run Setup from there.
>>>
>>> --
>>> Chuck Joslin - Team NetObjects
>>> BeyondFusion.com - Your Fusion Community
>>> www.beyondfusion.com
>>>
>>> Fusion Wish List - www.beyondfusion.com/wish
>>> Register domain names at www.awavedomains.com
>>>
>>> "Simon Ruckledge" <simon@studio49online.com> wrote in message
>>> news:dl0slr$qhr9@news01.netobjects.com...
>>> > Still no luck, anymore ideas? Same questions from installtion, cant
>>> > find
>>> > setup.ini, layout.bin etc
>>> >
>>> > Thanks
>>> >
>>> > Simon
>>> > "Chuck «BeyondFusion»" <chuck@beyond-nospam-fusion.com> wrote in
>>> > message
>>> > news:dl0rv3$qi61@news01.netobjects.com...
>>> >> Simon,
>>> >>
>>> >> Try emptying your temp folders. Both inside the Windows folder and
>>> >> your
>>> > user
>>> >> temp folders.
>>> >>
>>> >> Leftover files in there can cause problems with installations of
>> software
>>> >> sometimes.
>>> >>
>>> >> --
>>> >> Chuck Joslin - Team NetObjects
>>> >> Committed to helping you build better websites
>>> >>
>>> >> BeyondFusion.com - Your Fusion Community
>>> >> www.beyondfusion.com
>>> >>
>>> >> Fusion Wish List - www.beyondfusion.com/wish
>>> >> Register domain names at www.awavedomains.com
>>> >>
>>> >> "Simon Ruckledge" <simon@studio49online.com> wrote in message
>>> >> news:dl0rlp$qhr5@news01.netobjects.com...
>>> >> > Tried that and no luck, same message, trying to install on windows
>>> >> > xp
>>> >> > proffesional, clean computer with version 7 and 8 (upgrade on).
>>> >> > Still
>>> > same
>>> >> > message after new download
>>> >> >
>>> >> > Thanks
>>> >> >
>>> >> > Simon
>>> >> > "Chuck «BeyondFusion»" <chuck@beyond-nospam-fusion.com> wrote in
>>> >> > message
>>> >> > news:dl0p2u$qfv9@news01.netobjects.com...
>>> >> >> Simon,
>>> >> >>
>>> >> >> Sounds like a bad download. I'd redownload it and try again.
>>> >> >>
>>> >> >> --
>>> >> >> Chuck Joslin - Team NetObjects
>>> >> >> Committed to helping you build better websites
>>> >> >>
>>> >> >> BeyondFusion.com - Your Fusion Community
>>> >> >> www.beyondfusion.com
>>> >> >>
>>> >> >> Fusion Wish List - www.beyondfusion.com/wish
>>> >> >> Register domain names at www.awavedomains.com
>>> >> >>
>>> >> >> "Simon Ruckledge" <simon@studio49online.com> wrote in message
>>> >> >> news:dl0nnp$qfv8@news01.netobjects.com...
>>> >> >> > Hi
>>> >> >> >
>>> >> >> > Just purchased fusion 9 upgrade. Downloaded it and clicked to
>>> > install.
>>> >> > It
>>> >> >> > asks me "please insert disk 1 that contains the file layout.bin"
>>> > Where
>>> >> >> > should it be looking, the fusion 8 upgarde cd or prevoius
>>> >> >> > version
>> or
>>> > a
>>> >> >> > folder somewhere. Some have been downloaded so dont have all
>>> >> >> > cds.
>>> >> >> > Not
>>> >> > sure
>>> >> >> > what this means or what I should do?
>>> >> >> >
>>> >> >> > Thanks in advance
>>> >> >> >
>>> >> >> >
>>> >> >> > Simon Ruckledge
>>> >> >> >
>>> >> >> >
>>> >> >> > --
>>> >> >> > Simon Ruckledge
>>> >> >> > Partner
>>> >> >> >
>>> >> >> > studio fortynine website design
>>> >> >> > www.studiofortynine.com
>>> >> >> > tel: 01977 619832
>>> >> >> >
>>> >> >> >
>>> >> >>
>>> >> >>
>>> >> >
>>> >> >
>>> >>
>>> >>
>>> >
>>> >
>>>
>>>
>>
>>
>
>
-
Re: Fusion 9 Install Problems
Yes, Sorry missed that bit, I was haiving issues as it said self extracting
and didnt give me option. sorted now but thanks
Simon
"Chuck «BeyondFusion»" <supportno@spambeyondfusion.com> wrote in message
news:dl2fum$rin8@news01.netobjects.com...
> Simon,
>
> Isn't that what I told you to do a couple of posts back? (-;
>
> --
> Chuck Joslin - Team NetObjects
> BeyondFusion.com - Your Fusion Community
> www.beyondfusion.com
>
> Fusion Wish List - www.beyondfusion.com/wish
> Register domain names at www.awavedomains.com
>
> "Simon Ruckledge" <simon@studio49online.com> wrote in message
> news:dl2fip$rin6@news01.netobjects.com...
>> Got a message back from fusion help. I skipped using the self extract and
>> extracted them myself to afolder then run the install, now installed and
>> no problems. looking forward to getting in and taking a look
>>
>> Thanks
>> Simon
>>
>>
>> "Simon Ruckledge" <simon@studio49online.com> wrote in message
>> news:dl0vvf$qhr17@news01.netobjects.com...
>>> No Joy as such, I managed to egt it on my old computer but im migrating
>>> toa
>>> new faster machine. Its running xp profffesional. It has version 7 on
>>> it,
>>> upgrade 8 and trying to upgrade 9. same messages as before. This old
>>> comp
>>> runs windows 98se
>>>
>>> Thanks
>>>
>>>
>>> "Chuck «BeyondFusion»" <chuck@beyond-nospam-fusion.com> wrote in message
>>> news:dl0sqg$qi64@news01.netobjects.com...
>>>> Reboot so you'll hopefully kill off any setup processes that've already
>>>> started and failed.
>>>>
>>>> Then, make a folder and extracting the setup files into it.
>>>>
>>>> Then run Setup from there.
>>>>
>>>> --
>>>> Chuck Joslin - Team NetObjects
>>>> BeyondFusion.com - Your Fusion Community
>>>> www.beyondfusion.com
>>>>
>>>> Fusion Wish List - www.beyondfusion.com/wish
>>>> Register domain names at www.awavedomains.com
>>>>
>>>> "Simon Ruckledge" <simon@studio49online.com> wrote in message
>>>> news:dl0slr$qhr9@news01.netobjects.com...
>>>> > Still no luck, anymore ideas? Same questions from installtion, cant
>>>> > find
>>>> > setup.ini, layout.bin etc
>>>> >
>>>> > Thanks
>>>> >
>>>> > Simon
>>>> > "Chuck «BeyondFusion»" <chuck@beyond-nospam-fusion.com> wrote in
>>>> > message
>>>> > news:dl0rv3$qi61@news01.netobjects.com...
>>>> >> Simon,
>>>> >>
>>>> >> Try emptying your temp folders. Both inside the Windows folder and
>>>> >> your
>>>> > user
>>>> >> temp folders.
>>>> >>
>>>> >> Leftover files in there can cause problems with installations of
>>> software
>>>> >> sometimes.
>>>> >>
>>>> >> --
>>>> >> Chuck Joslin - Team NetObjects
>>>> >> Committed to helping you build better websites
>>>> >>
>>>> >> BeyondFusion.com - Your Fusion Community
>>>> >> www.beyondfusion.com
>>>> >>
>>>> >> Fusion Wish List - www.beyondfusion.com/wish
>>>> >> Register domain names at www.awavedomains.com
>>>> >>
>>>> >> "Simon Ruckledge" <simon@studio49online.com> wrote in message
>>>> >> news:dl0rlp$qhr5@news01.netobjects.com...
>>>> >> > Tried that and no luck, same message, trying to install on windows
>>>> >> > xp
>>>> >> > proffesional, clean computer with version 7 and 8 (upgrade on).
>>>> >> > Still
>>>> > same
>>>> >> > message after new download
>>>> >> >
>>>> >> > Thanks
>>>> >> >
>>>> >> > Simon
>>>> >> > "Chuck «BeyondFusion»" <chuck@beyond-nospam-fusion.com> wrote in
>>>> >> > message
>>>> >> > news:dl0p2u$qfv9@news01.netobjects.com...
>>>> >> >> Simon,
>>>> >> >>
>>>> >> >> Sounds like a bad download. I'd redownload it and try again.
>>>> >> >>
>>>> >> >> --
>>>> >> >> Chuck Joslin - Team NetObjects
>>>> >> >> Committed to helping you build better websites
>>>> >> >>
>>>> >> >> BeyondFusion.com - Your Fusion Community
>>>> >> >> www.beyondfusion.com
>>>> >> >>
>>>> >> >> Fusion Wish List - www.beyondfusion.com/wish
>>>> >> >> Register domain names at www.awavedomains.com
>>>> >> >>
>>>> >> >> "Simon Ruckledge" <simon@studio49online.com> wrote in message
>>>> >> >> news:dl0nnp$qfv8@news01.netobjects.com...
>>>> >> >> > Hi
>>>> >> >> >
>>>> >> >> > Just purchased fusion 9 upgrade. Downloaded it and clicked to
>>>> > install.
>>>> >> > It
>>>> >> >> > asks me "please insert disk 1 that contains the file
>>>> >> >> > layout.bin"
>>>> > Where
>>>> >> >> > should it be looking, the fusion 8 upgarde cd or prevoius
>>>> >> >> > version
>>> or
>>>> > a
>>>> >> >> > folder somewhere. Some have been downloaded so dont have all
>>>> >> >> > cds.
>>>> >> >> > Not
>>>> >> > sure
>>>> >> >> > what this means or what I should do?
>>>> >> >> >
>>>> >> >> > Thanks in advance
>>>> >> >> >
>>>> >> >> >
>>>> >> >> > Simon Ruckledge
>>>> >> >> >
>>>> >> >> >
>>>> >> >> > --
>>>> >> >> > Simon Ruckledge
>>>> >> >> > Partner
>>>> >> >> >
>>>> >> >> > studio fortynine website design
>>>> >> >> > www.studiofortynine.com
>>>> >> >> > tel: 01977 619832
>>>> >> >> >
>>>> >> >> >
>>>> >> >>
>>>> >> >>
>>>> >> >
>>>> >> >
>>>> >>
>>>> >>
>>>> >
>>>> >
>>>>
>>>>
>>>
>>>
>>
>>
>
>
-
Re: Fusion ( Install Problems
Talk to me. what...........?
-- don't know what you are talking about.........
--N
"Marty Ward" <wmartin5@qwest.net> wrote in message
news:dn0e82$e421@news01.netobjects.com...
> I have the same issue. Checked by doing a search for the file and nothing
> was found. Opened a ticket for the issue. Never had this problem with
other
> upgrades/updates.
> Marty
>
> "Rev. Mike" <sacascas> wrote in message
> news:dl15ct$qju1@news01.netobjects.com...
> > Do you mean the setup application itself?
> > Did you click save or open when you downloaded it?
> > If open, it is in your browser cache and you best find
> > it and save it somewhere safe.
> >
> > If you mean the extracted files, check your temp dir's
> >
> >
> > "News" <clayton@nospamskyevolutionary.net> wrote in message
> > news:dl150v$qi620@news01.netobjects.com...
> >> What directory is the install file in? I have heard of other install
> >> programs having problems with deeply nested directories.
> >>
> >>
> >> "Simon Ruckledge" <simon@studio49online.com> wrote in message
> >> news:dl0nnp$qfv8@news01.netobjects.com...
> >>> Hi
> >>>
> >>> Just purchased fusion 9 upgrade. Downloaded it and clicked to install.
> >>> It
> >>> asks me "please insert disk 1 that contains the file layout.bin"
Where
> >>> should it be looking, the fusion 8 upgarde cd or prevoius version or a
> >>> folder somewhere. Some have been downloaded so dont have all cds. Not
> >>> sure
> >>> what this means or what I should do?
> >>>
> >>> Thanks in advance
> >>>
> >>>
> >>> Simon Ruckledge
> >>>
> >>>
> >>> --
> >>> Simon Ruckledge
> >>> Partner
> >>>
> >>> studio fortynine website design
> >>> www.studiofortynine.com
> >>> tel: 01977 619832
> >>>
> >>>
> >>
> >>
> >
> >
>
>
-
Re: Fusion ( Install Problems
Wonder if you're getting the same problems as me Nancy.
Sometimes I don't get all the messages in a thread. I'm set up for all
messages but sometimes a few of them just don't get downloaded even though
it says there are new messages in the group I can't see them. All I can do
is to play catchup and hope that they come up in a later posting and that
the message history is there within the post itself.
On this machine I'm using Outlook Express just for this group. There's
nothing else in it - Not even emails as such. It's purely for the group.
Maybe I should switch to a different reader.
--
Ian
1AHost
Free Web Hosting - PHP & MySQL Hosting
Resellers and Affiliates Schemes
www.1ahost.co.uk
"Nancy O" <nancyoshea1@verizon.net> wrote in message
news:dn0v2o$e6v1@news01.netobjects.com...
> Talk to me. what...........?
> -- don't know what you are talking about.........
>
>
> --N
>
>
>
>
>
>
>
>
> "Marty Ward" <wmartin5@qwest.net> wrote in message
> news:dn0e82$e421@news01.netobjects.com...
> > I have the same issue. Checked by doing a search for the file and
nothing
> > was found. Opened a ticket for the issue. Never had this problem with
> other
> > upgrades/updates.
> > Marty
> >
> > "Rev. Mike" <sacascas> wrote in message
> > news:dl15ct$qju1@news01.netobjects.com...
> > > Do you mean the setup application itself?
> > > Did you click save or open when you downloaded it?
> > > If open, it is in your browser cache and you best find
> > > it and save it somewhere safe.
> > >
> > > If you mean the extracted files, check your temp dir's
> > >
> > >
> > > "News" <clayton@nospamskyevolutionary.net> wrote in message
> > > news:dl150v$qi620@news01.netobjects.com...
> > >> What directory is the install file in? I have heard of other install
> > >> programs having problems with deeply nested directories.
> > >>
> > >>
> > >> "Simon Ruckledge" <simon@studio49online.com> wrote in message
> > >> news:dl0nnp$qfv8@news01.netobjects.com...
> > >>> Hi
> > >>>
> > >>> Just purchased fusion 9 upgrade. Downloaded it and clicked to
install.
> > >>> It
> > >>> asks me "please insert disk 1 that contains the file layout.bin"
> Where
> > >>> should it be looking, the fusion 8 upgarde cd or prevoius version or
a
> > >>> folder somewhere. Some have been downloaded so dont have all cds.
Not
> > >>> sure
> > >>> what this means or what I should do?
> > >>>
> > >>> Thanks in advance
> > >>>
> > >>>
> > >>> Simon Ruckledge
> > >>>
> > >>>
> > >>> --
> > >>> Simon Ruckledge
> > >>> Partner
> > >>>
> > >>> studio fortynine website design
> > >>> www.studiofortynine.com
> > >>> tel: 01977 619832
> > >>>
> > >>>
> > >>
> > >>
> > >
> > >
> >
> >
>
>
-
Re: Fusion ( Install Problems
I have the same issue. Checked by doing a search for the file and nothing
was found. Opened a ticket for the issue. Never had this problem with other
upgrades/updates.
Marty
"Rev. Mike" <sacascas> wrote in message
news:dl15ct$qju1@news01.netobjects.com...
> Do you mean the setup application itself?
> Did you click save or open when you downloaded it?
> If open, it is in your browser cache and you best find
> it and save it somewhere safe.
>
> If you mean the extracted files, check your temp dir's
>
>
> "News" <clayton@nospamskyevolutionary.net> wrote in message
> news:dl150v$qi620@news01.netobjects.com...
>> What directory is the install file in? I have heard of other install
>> programs having problems with deeply nested directories.
>>
>>
>> "Simon Ruckledge" <simon@studio49online.com> wrote in message
>> news:dl0nnp$qfv8@news01.netobjects.com...
>>> Hi
>>>
>>> Just purchased fusion 9 upgrade. Downloaded it and clicked to install.
>>> It
>>> asks me "please insert disk 1 that contains the file layout.bin" Where
>>> should it be looking, the fusion 8 upgarde cd or prevoius version or a
>>> folder somewhere. Some have been downloaded so dont have all cds. Not
>>> sure
>>> what this means or what I should do?
>>>
>>> Thanks in advance
>>>
>>>
>>> Simon Ruckledge
>>>
>>>
>>> --
>>> Simon Ruckledge
>>> Partner
>>>
>>> studio fortynine website design
>>> www.studiofortynine.com
>>> tel: 01977 619832
>>>
>>>
>>
>>
>
>
-
Re: Fusion ( Install Problems
It is a maint setting.
tools --> options --> Maint. tab
change the value for delete new messages or better
yet, remove the check from that box
"Ian" <ian@remove1ahost.co.uk> wrote in message
news:dn11ne$e5r3@news01.netobjects.com...
> Wonder if you're getting the same problems as me Nancy.
>
> Sometimes I don't get all the messages in a thread. I'm set up for all
> messages but sometimes a few of them just don't get downloaded even though
> it says there are new messages in the group I can't see them. All I can do
> is to play catchup and hope that they come up in a later posting and that
> the message history is there within the post itself.
>
> On this machine I'm using Outlook Express just for this group. There's
> nothing else in it - Not even emails as such. It's purely for the group.
> Maybe I should switch to a different reader.
>
> --
> Ian
> 1AHost
>
> Free Web Hosting - PHP & MySQL Hosting
> Resellers and Affiliates Schemes
> www.1ahost.co.uk
>
>
> "Nancy O" <nancyoshea1@verizon.net> wrote in message
> news:dn0v2o$e6v1@news01.netobjects.com...
>> Talk to me. what...........?
>> -- don't know what you are talking about.........
>>
>>
>> --N
>>
>>
>>
>>
>>
>>
>>
>>
>> "Marty Ward" <wmartin5@qwest.net> wrote in message
>> news:dn0e82$e421@news01.netobjects.com...
>> > I have the same issue. Checked by doing a search for the file and
> nothing
>> > was found. Opened a ticket for the issue. Never had this problem with
>> other
>> > upgrades/updates.
>> > Marty
>> >
>> > "Rev. Mike" <sacascas> wrote in message
>> > news:dl15ct$qju1@news01.netobjects.com...
>> > > Do you mean the setup application itself?
>> > > Did you click save or open when you downloaded it?
>> > > If open, it is in your browser cache and you best find
>> > > it and save it somewhere safe.
>> > >
>> > > If you mean the extracted files, check your temp dir's
>> > >
>> > >
>> > > "News" <clayton@nospamskyevolutionary.net> wrote in message
>> > > news:dl150v$qi620@news01.netobjects.com...
>> > >> What directory is the install file in? I have heard of other install
>> > >> programs having problems with deeply nested directories.
>> > >>
>> > >>
>> > >> "Simon Ruckledge" <simon@studio49online.com> wrote in message
>> > >> news:dl0nnp$qfv8@news01.netobjects.com...
>> > >>> Hi
>> > >>>
>> > >>> Just purchased fusion 9 upgrade. Downloaded it and clicked to
> install.
>> > >>> It
>> > >>> asks me "please insert disk 1 that contains the file layout.bin"
>> Where
>> > >>> should it be looking, the fusion 8 upgarde cd or prevoius version
>> > >>> or
> a
>> > >>> folder somewhere. Some have been downloaded so dont have all cds.
> Not
>> > >>> sure
>> > >>> what this means or what I should do?
>> > >>>
>> > >>> Thanks in advance
>> > >>>
>> > >>>
>> > >>> Simon Ruckledge
>> > >>>
>> > >>>
>> > >>> --
>> > >>> Simon Ruckledge
>> > >>> Partner
>> > >>>
>> > >>> studio fortynine website design
>> > >>> www.studiofortynine.com
>> > >>> tel: 01977 619832
>> > >>>
>> > >>>
>> > >>
>> > >>
>> > >
>> > >
>> >
>> >
>>
>>
>
>
-
Re: Fusion ( Install Problems
Sorry Rev - the box isn't checked on my system. Any other ideas would be
gratefully received. It is really annoying when you see a thread start from
halfway through and you don't know what went before.
Thanks,
--
Ian
1AHost
Free Web Hosting - PHP & MySQL Hosting
Resellers and Affiliates Schemes
www.1ahost.co.uk
"Rev. Mike" <nof at kujawas dot net> wrote in message
news:dn1rjd$ebu3@news01.netobjects.com...
> It is a maint setting.
> tools --> options --> Maint. tab
> change the value for delete new messages or better
> yet, remove the check from that box
>
>
>
> "Ian" <ian@remove1ahost.co.uk> wrote in message
> news:dn11ne$e5r3@news01.netobjects.com...
>> Wonder if you're getting the same problems as me Nancy.
>>
>> Sometimes I don't get all the messages in a thread. I'm set up for all
>> messages but sometimes a few of them just don't get downloaded even
>> though
>> it says there are new messages in the group I can't see them. All I can
>> do
>> is to play catchup and hope that they come up in a later posting and that
>> the message history is there within the post itself.
>>
>> On this machine I'm using Outlook Express just for this group. There's
>> nothing else in it - Not even emails as such. It's purely for the group.
>> Maybe I should switch to a different reader.
>>
>> --
>> Ian
>> 1AHost
>>
>> Free Web Hosting - PHP & MySQL Hosting
>> Resellers and Affiliates Schemes
>> www.1ahost.co.uk
>>
>>
>> "Nancy O" <nancyoshea1@verizon.net> wrote in message
>> news:dn0v2o$e6v1@news01.netobjects.com...
>>> Talk to me. what...........?
>>> -- don't know what you are talking about.........
>>>
>>>
>>> --N
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>> "Marty Ward" <wmartin5@qwest.net> wrote in message
>>> news:dn0e82$e421@news01.netobjects.com...
>>> > I have the same issue. Checked by doing a search for the file and
>> nothing
>>> > was found. Opened a ticket for the issue. Never had this problem with
>>> other
>>> > upgrades/updates.
>>> > Marty
>>> >
>>> > "Rev. Mike" <sacascas> wrote in message
>>> > news:dl15ct$qju1@news01.netobjects.com...
>>> > > Do you mean the setup application itself?
>>> > > Did you click save or open when you downloaded it?
>>> > > If open, it is in your browser cache and you best find
>>> > > it and save it somewhere safe.
>>> > >
>>> > > If you mean the extracted files, check your temp dir's
>>> > >
>>> > >
>>> > > "News" <clayton@nospamskyevolutionary.net> wrote in message
>>> > > news:dl150v$qi620@news01.netobjects.com...
>>> > >> What directory is the install file in? I have heard of other
>>> > >> install
>>> > >> programs having problems with deeply nested directories.
>>> > >>
>>> > >>
>>> > >> "Simon Ruckledge" <simon@studio49online.com> wrote in message
>>> > >> news:dl0nnp$qfv8@news01.netobjects.com...
>>> > >>> Hi
>>> > >>>
>>> > >>> Just purchased fusion 9 upgrade. Downloaded it and clicked to
>> install.
>>> > >>> It
>>> > >>> asks me "please insert disk 1 that contains the file layout.bin"
>>> Where
>>> > >>> should it be looking, the fusion 8 upgarde cd or prevoius version
>>> > >>> or
>> a
>>> > >>> folder somewhere. Some have been downloaded so dont have all cds.
>> Not
>>> > >>> sure
>>> > >>> what this means or what I should do?
>>> > >>>
>>> > >>> Thanks in advance
>>> > >>>
>>> > >>>
>>> > >>> Simon Ruckledge
>>> > >>>
>>> > >>>
>>> > >>> --
>>> > >>> Simon Ruckledge
>>> > >>> Partner
>>> > >>>
>>> > >>> studio fortynine website design
>>> > >>> www.studiofortynine.com
>>> > >>> tel: 01977 619832
>>> > >>>
>>> > >>>
>>> > >>
>>> > >>
>>> > >
>>> > >
>>> >
>>> >
>>>
>>>
>>
>>
>
>
-
Re: Fusion ( Install Problems
Sometimes you have to manually download the headers
I have my headers preset to download 1000 at a time
click Tools --> Get Next # Headers where # is the number of headers
you set in options --> Read --> News-->[ number of headers to get at one
time]
"Ian" <ianh@remove1ahost.co.uk> wrote in message
news:dn1vka$eca4@news01.netobjects.com...
> Sorry Rev - the box isn't checked on my system. Any other ideas would be
> gratefully received. It is really annoying when you see a thread start
> from halfway through and you don't know what went before.
>
> Thanks,
>
> --
> Ian
> 1AHost
>
> Free Web Hosting - PHP & MySQL Hosting
> Resellers and Affiliates Schemes
> www.1ahost.co.uk
-
Re: Fusion ( Install Problems
I'll give that a try next time I get some phantom ones and let you know.
Thanks Mike
--
Ian
1AHost
Free Web Hosting - PHP & MySQL Hosting
Resellers and Affiliates Schemes
www.1ahost.co.uk
"Rev. Mike" <nof at kujawas dot net> wrote in message
news:dn23ke$eca13@news01.netobjects.com...
> Sometimes you have to manually download the headers
> I have my headers preset to download 1000 at a time
>
> click Tools --> Get Next # Headers where # is the number of headers
> you set in options --> Read --> News-->[ number of headers to get at one
> time]
>
>
> "Ian" <ianh@remove1ahost.co.uk> wrote in message
> news:dn1vka$eca4@news01.netobjects.com...
>> Sorry Rev - the box isn't checked on my system. Any other ideas would be
>> gratefully received. It is really annoying when you see a thread start
>> from halfway through and you don't know what went before.
>>
>> Thanks,
>>
>> --
>> Ian
>> 1AHost
>>
>> Free Web Hosting - PHP & MySQL Hosting
>> Resellers and Affiliates Schemes
>> www.1ahost.co.uk
>
>
-
Re: Fusion ( Install Problems
That seems to have helped a bit.
Got quite a few more than I had before. Still one or two seem to be missing
but at least that's some progress.
Thanks for the help. Just have to see what happens in the future.
--
Ian
1AHost
Free Web Hosting - PHP & MySQL Hosting
Resellers and Affiliates Schemes
www.1ahost.co.uk
"Ian" <ianh@remove1ahost.co.uk> wrote in message
news:dn3h4m$eov2@news01.netobjects.com...
> I'll give that a try next time I get some phantom ones and let you know.
>
> Thanks Mike
>
> --
> Ian
> 1AHost
>
> Free Web Hosting - PHP & MySQL Hosting
> Resellers and Affiliates Schemes
> www.1ahost.co.uk
>
>
> "Rev. Mike" <nof at kujawas dot net> wrote in message
> news:dn23ke$eca13@news01.netobjects.com...
> > Sometimes you have to manually download the headers
> > I have my headers preset to download 1000 at a time
> >
> > click Tools --> Get Next # Headers where # is the number of headers
> > you set in options --> Read --> News-->[ number of headers to get at one
> > time]
> >
> >
> > "Ian" <ianh@remove1ahost.co.uk> wrote in message
> > news:dn1vka$eca4@news01.netobjects.com...
> >> Sorry Rev - the box isn't checked on my system. Any other ideas would
be
> >> gratefully received. It is really annoying when you see a thread start
> >> from halfway through and you don't know what went before.
> >>
> >> Thanks,
> >>
> >> --
> >> Ian
> >> 1AHost
> >>
> >> Free Web Hosting - PHP & MySQL Hosting
> >> Resellers and Affiliates Schemes
> >> www.1ahost.co.uk
> >
> >
>
>
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules