Fusion ( Install Problems

[Simon Ruckledge]

Hi

Just purchased fusion 9 upgrade. Downloaded it and clicked to install. It
asks me "please insert disk 1 that contains the file layout.bin" Where
should it be looking, the fusion 8 upgarde cd or prevoius version or a
folder somewhere. Some have been downloaded so dont have all cds. Not sure
what this means or what I should do?

Thanks in advance


Simon Ruckledge


--
Simon Ruckledge
Partner

studio fortynine website design
www.studiofortynine.com
tel: 01977 619832

[Chuck «BeyondFusion»]

Simon,

Sounds like a bad download. I'd redownload it and try again.

--
Chuck Joslin - Team NetObjects
Committed to helping you build better websites

BeyondFusion.com - Your Fusion Community
www.beyondfusion.com

Fusion Wish List - www.beyondfusion.com/wish
Register domain names at www.awavedomains.com

"Simon Ruckledge" <simon@studio49online.com> wrote in message
news:dl0nnp$qfv8@news01.netobjects.com...
> Hi
>
> Just purchased fusion 9 upgrade. Downloaded it and clicked to install. It
> asks me "please insert disk 1 that contains the file layout.bin" Where
> should it be looking, the fusion 8 upgarde cd or prevoius version or a
> folder somewhere. Some have been downloaded so dont have all cds. Not sure
> what this means or what I should do?
>
> Thanks in advance
>
>
> Simon Ruckledge
>
>
> --
> Simon Ruckledge
> Partner
>
> studio fortynine website design
> www.studiofortynine.com
> tel: 01977 619832
>
>

[Simon Ruckledge]

Tried that and no luck, same message, trying to install on windows xp
proffesional, clean computer with version 7 and 8 (upgrade on). Still same
message after new download

Thanks

Simon
"Chuck «BeyondFusion»" <chuck@beyond-nospam-fusion.com> wrote in message
news:dl0p2u$qfv9@news01.netobjects.com...
> Simon,
>
> Sounds like a bad download. I'd redownload it and try again.
>
> --
> Chuck Joslin - Team NetObjects
> Committed to helping you build better websites
>
> BeyondFusion.com - Your Fusion Community
> www.beyondfusion.com
>
> Fusion Wish List - www.beyondfusion.com/wish
> Register domain names at www.awavedomains.com
>
> "Simon Ruckledge" <simon@studio49online.com> wrote in message
> news:dl0nnp$qfv8@news01.netobjects.com...
> > Hi
> >
> > Just purchased fusion 9 upgrade. Downloaded it and clicked to install.
It
> > asks me "please insert disk 1 that contains the file layout.bin" Where
> > should it be looking, the fusion 8 upgarde cd or prevoius version or a
> > folder somewhere. Some have been downloaded so dont have all cds. Not
sure
> > what this means or what I should do?
> >
> > Thanks in advance
> >
> >
> > Simon Ruckledge
> >
> >
> > --
> > Simon Ruckledge
> > Partner
> >
> > studio fortynine website design
> > www.studiofortynine.com
> > tel: 01977 619832
> >
> >
>
>

[Chuck «BeyondFusion»]

Simon,

Try emptying your temp folders. Both inside the Windows folder and your user
temp folders.

Leftover files in there can cause problems with installations of software
sometimes.

--
Chuck Joslin - Team NetObjects
Committed to helping you build better websites

BeyondFusion.com - Your Fusion Community
www.beyondfusion.com

Fusion Wish List - www.beyondfusion.com/wish
Register domain names at www.awavedomains.com

"Simon Ruckledge" <simon@studio49online.com> wrote in message
news:dl0rlp$qhr5@news01.netobjects.com...
> Tried that and no luck, same message, trying to install on windows xp
> proffesional, clean computer with version 7 and 8 (upgrade on). Still same
> message after new download
>
> Thanks
>
> Simon
> "Chuck «BeyondFusion»" <chuck@beyond-nospam-fusion.com> wrote in message
> news:dl0p2u$qfv9@news01.netobjects.com...
>> Simon,
>>
>> Sounds like a bad download. I'd redownload it and try again.
>>
>> --
>> Chuck Joslin - Team NetObjects
>> Committed to helping you build better websites
>>
>> BeyondFusion.com - Your Fusion Community
>> www.beyondfusion.com
>>
>> Fusion Wish List - www.beyondfusion.com/wish
>> Register domain names at www.awavedomains.com
>>
>> "Simon Ruckledge" <simon@studio49online.com> wrote in message
>> news:dl0nnp$qfv8@news01.netobjects.com...
>> > Hi
>> >
>> > Just purchased fusion 9 upgrade. Downloaded it and clicked to install.
> It
>> > asks me "please insert disk 1 that contains the file layout.bin" Where
>> > should it be looking, the fusion 8 upgarde cd or prevoius version or a
>> > folder somewhere. Some have been downloaded so dont have all cds. Not
> sure
>> > what this means or what I should do?
>> >
>> > Thanks in advance
>> >
>> >
>> > Simon Ruckledge
>> >
>> >
>> > --
>> > Simon Ruckledge
>> > Partner
>> >
>> > studio fortynine website design
>> > www.studiofortynine.com
>> > tel: 01977 619832
>> >
>> >
>>
>>
>
>

[Simon Ruckledge]

No Joy as such, I managed to egt it on my old computer but im migrating toa
new faster machine. Its running xp profffesional. It has version 7 on it,
upgrade 8 and trying to upgrade 9. same messages as before. This old comp
runs windows 98se

Thanks


"Chuck «BeyondFusion»" <chuck@beyond-nospam-fusion.com> wrote in message
news:dl0sqg$qi64@news01.netobjects.com...
> Reboot so you'll hopefully kill off any setup processes that've already
> started and failed.
>
> Then, make a folder and extracting the setup files into it.
>
> Then run Setup from there.
>
> --
> Chuck Joslin - Team NetObjects
> BeyondFusion.com - Your Fusion Community
> www.beyondfusion.com
>
> Fusion Wish List - www.beyondfusion.com/wish
> Register domain names at www.awavedomains.com
>
> "Simon Ruckledge" <simon@studio49online.com> wrote in message
> news:dl0slr$qhr9@news01.netobjects.com...
> > Still no luck, anymore ideas? Same questions from installtion, cant find
> > setup.ini, layout.bin etc
> >
> > Thanks
> >
> > Simon
> > "Chuck «BeyondFusion»" <chuck@beyond-nospam-fusion.com> wrote in message
> > news:dl0rv3$qi61@news01.netobjects.com...
> >> Simon,
> >>
> >> Try emptying your temp folders. Both inside the Windows folder and your
> > user
> >> temp folders.
> >>
> >> Leftover files in there can cause problems with installations of
software
> >> sometimes.
> >>
> >> --
> >> Chuck Joslin - Team NetObjects
> >> Committed to helping you build better websites
> >>
> >> BeyondFusion.com - Your Fusion Community
> >> www.beyondfusion.com
> >>
> >> Fusion Wish List - www.beyondfusion.com/wish
> >> Register domain names at www.awavedomains.com
> >>
> >> "Simon Ruckledge" <simon@studio49online.com> wrote in message
> >> news:dl0rlp$qhr5@news01.netobjects.com...
> >> > Tried that and no luck, same message, trying to install on windows xp
> >> > proffesional, clean computer with version 7 and 8 (upgrade on). Still
> > same
> >> > message after new download
> >> >
> >> > Thanks
> >> >
> >> > Simon
> >> > "Chuck «BeyondFusion»" <chuck@beyond-nospam-fusion.com> wrote in
> >> > message
> >> > news:dl0p2u$qfv9@news01.netobjects.com...
> >> >> Simon,
> >> >>
> >> >> Sounds like a bad download. I'd redownload it and try again.
> >> >>
> >> >> --
> >> >> Chuck Joslin - Team NetObjects
> >> >> Committed to helping you build better websites
> >> >>
> >> >> BeyondFusion.com - Your Fusion Community
> >> >> www.beyondfusion.com
> >> >>
> >> >> Fusion Wish List - www.beyondfusion.com/wish
> >> >> Register domain names at www.awavedomains.com
> >> >>
> >> >> "Simon Ruckledge" <simon@studio49online.com> wrote in message
> >> >> news:dl0nnp$qfv8@news01.netobjects.com...
> >> >> > Hi
> >> >> >
> >> >> > Just purchased fusion 9 upgrade. Downloaded it and clicked to
> > install.
> >> > It
> >> >> > asks me "please insert disk 1 that contains the file layout.bin"
> > Where
> >> >> > should it be looking, the fusion 8 upgarde cd or prevoius version
or
> > a
> >> >> > folder somewhere. Some have been downloaded so dont have all cds.
> >> >> > Not
> >> > sure
> >> >> > what this means or what I should do?
> >> >> >
> >> >> > Thanks in advance
> >> >> >
> >> >> >
> >> >> > Simon Ruckledge
> >> >> >
> >> >> >
> >> >> > --
> >> >> > Simon Ruckledge
> >> >> > Partner
> >> >> >
> >> >> > studio fortynine website design
> >> >> > www.studiofortynine.com
> >> >> > tel: 01977 619832
> >> >> >
> >> >> >
> >> >>
> >> >>
> >> >
> >> >
> >>
> >>
> >
> >
>
>

[Simon Ruckledge]

Still no luck, anymore ideas? Same questions from installtion, cant find
setup.ini, layout.bin etc

Thanks

Simon
"Chuck «BeyondFusion»" <chuck@beyond-nospam-fusion.com> wrote in message
news:dl0rv3$qi61@news01.netobjects.com...
> Simon,
>
> Try emptying your temp folders. Both inside the Windows folder and your
user
> temp folders.
>
> Leftover files in there can cause problems with installations of software
> sometimes.
>
> --
> Chuck Joslin - Team NetObjects
> Committed to helping you build better websites
>
> BeyondFusion.com - Your Fusion Community
> www.beyondfusion.com
>
> Fusion Wish List - www.beyondfusion.com/wish
> Register domain names at www.awavedomains.com
>
> "Simon Ruckledge" <simon@studio49online.com> wrote in message
> news:dl0rlp$qhr5@news01.netobjects.com...
> > Tried that and no luck, same message, trying to install on windows xp
> > proffesional, clean computer with version 7 and 8 (upgrade on). Still
same
> > message after new download
> >
> > Thanks
> >
> > Simon
> > "Chuck «BeyondFusion»" <chuck@beyond-nospam-fusion.com> wrote in message
> > news:dl0p2u$qfv9@news01.netobjects.com...
> >> Simon,
> >>
> >> Sounds like a bad download. I'd redownload it and try again.
> >>
> >> --
> >> Chuck Joslin - Team NetObjects
> >> Committed to helping you build better websites
> >>
> >> BeyondFusion.com - Your Fusion Community
> >> www.beyondfusion.com
> >>
> >> Fusion Wish List - www.beyondfusion.com/wish
> >> Register domain names at www.awavedomains.com
> >>
> >> "Simon Ruckledge" <simon@studio49online.com> wrote in message
> >> news:dl0nnp$qfv8@news01.netobjects.com...
> >> > Hi
> >> >
> >> > Just purchased fusion 9 upgrade. Downloaded it and clicked to
install.
> > It
> >> > asks me "please insert disk 1 that contains the file layout.bin"
Where
> >> > should it be looking, the fusion 8 upgarde cd or prevoius version or
a
> >> > folder somewhere. Some have been downloaded so dont have all cds. Not
> > sure
> >> > what this means or what I should do?
> >> >
> >> > Thanks in advance
> >> >
> >> >
> >> > Simon Ruckledge
> >> >
> >> >
> >> > --
> >> > Simon Ruckledge
> >> > Partner
> >> >
> >> > studio fortynine website design
> >> > www.studiofortynine.com
> >> > tel: 01977 619832
> >> >
> >> >
> >>
> >>
> >
> >
>
>

[Chuck «BeyondFusion»]

Reboot so you'll hopefully kill off any setup processes that've already
started and failed.

Then, make a folder and extracting the setup files into it.

Then run Setup from there.

--
Chuck Joslin - Team NetObjects
BeyondFusion.com - Your Fusion Community
www.beyondfusion.com

Fusion Wish List - www.beyondfusion.com/wish
Register domain names at www.awavedomains.com

"Simon Ruckledge" <simon@studio49online.com> wrote in message
news:dl0slr$qhr9@news01.netobjects.com...
> Still no luck, anymore ideas? Same questions from installtion, cant find
> setup.ini, layout.bin etc
>
> Thanks
>
> Simon
> "Chuck «BeyondFusion»" <chuck@beyond-nospam-fusion.com> wrote in message
> news:dl0rv3$qi61@news01.netobjects.com...
>> Simon,
>>
>> Try emptying your temp folders. Both inside the Windows folder and your
> user
>> temp folders.
>>
>> Leftover files in there can cause problems with installations of software
>> sometimes.
>>
>> --
>> Chuck Joslin - Team NetObjects
>> Committed to helping you build better websites
>>
>> BeyondFusion.com - Your Fusion Community
>> www.beyondfusion.com
>>
>> Fusion Wish List - www.beyondfusion.com/wish
>> Register domain names at www.awavedomains.com
>>
>> "Simon Ruckledge" <simon@studio49online.com> wrote in message
>> news:dl0rlp$qhr5@news01.netobjects.com...
>> > Tried that and no luck, same message, trying to install on windows xp
>> > proffesional, clean computer with version 7 and 8 (upgrade on). Still
> same
>> > message after new download
>> >
>> > Thanks
>> >
>> > Simon
>> > "Chuck «BeyondFusion»" <chuck@beyond-nospam-fusion.com> wrote in
>> > message
>> > news:dl0p2u$qfv9@news01.netobjects.com...
>> >> Simon,
>> >>
>> >> Sounds like a bad download. I'd redownload it and try again.
>> >>
>> >> --
>> >> Chuck Joslin - Team NetObjects
>> >> Committed to helping you build better websites
>> >>
>> >> BeyondFusion.com - Your Fusion Community
>> >> www.beyondfusion.com
>> >>
>> >> Fusion Wish List - www.beyondfusion.com/wish
>> >> Register domain names at www.awavedomains.com
>> >>
>> >> "Simon Ruckledge" <simon@studio49online.com> wrote in message
>> >> news:dl0nnp$qfv8@news01.netobjects.com...
>> >> > Hi
>> >> >
>> >> > Just purchased fusion 9 upgrade. Downloaded it and clicked to
> install.
>> > It
>> >> > asks me "please insert disk 1 that contains the file layout.bin"
> Where
>> >> > should it be looking, the fusion 8 upgarde cd or prevoius version or
> a
>> >> > folder somewhere. Some have been downloaded so dont have all cds.
>> >> > Not
>> > sure
>> >> > what this means or what I should do?
>> >> >
>> >> > Thanks in advance
>> >> >
>> >> >
>> >> > Simon Ruckledge
>> >> >
>> >> >
>> >> > --
>> >> > Simon Ruckledge
>> >> > Partner
>> >> >
>> >> > studio fortynine website design
>> >> > www.studiofortynine.com
>> >> > tel: 01977 619832
>> >> >
>> >> >
>> >>
>> >>
>> >
>> >
>>
>>
>
>

[Rev. Mike]

Do you mean the setup application itself?
Did you click save or open when you downloaded it?
If open, it is in your browser cache and you best find
it and save it somewhere safe.

If you mean the extracted files, check your temp dir's


"News" <clayton@nospamskyevolutionary.net> wrote in message
news:dl150v$qi620@news01.netobjects.com...
> What directory is the install file in? I have heard of other install
> programs having problems with deeply nested directories.
>
>
> "Simon Ruckledge" <simon@studio49online.com> wrote in message
> news:dl0nnp$qfv8@news01.netobjects.com...
>> Hi
>>
>> Just purchased fusion 9 upgrade. Downloaded it and clicked to install. It
>> asks me "please insert disk 1 that contains the file layout.bin" Where
>> should it be looking, the fusion 8 upgarde cd or prevoius version or a
>> folder somewhere. Some have been downloaded so dont have all cds. Not
>> sure
>> what this means or what I should do?
>>
>> Thanks in advance
>>
>>
>> Simon Ruckledge
>>
>>
>> --
>> Simon Ruckledge
>> Partner
>>
>> studio fortynine website design
>> www.studiofortynine.com
>> tel: 01977 619832
>>
>>
>
>

[News]

What directory is the install file in? I have heard of other install
programs having problems with deeply nested directories.


"Simon Ruckledge" <simon@studio49online.com> wrote in message
news:dl0nnp$qfv8@news01.netobjects.com...
> Hi
>
> Just purchased fusion 9 upgrade. Downloaded it and clicked to install. It
> asks me "please insert disk 1 that contains the file layout.bin" Where
> should it be looking, the fusion 8 upgarde cd or prevoius version or a
> folder somewhere. Some have been downloaded so dont have all cds. Not sure
> what this means or what I should do?
>
> Thanks in advance
>
>
> Simon Ruckledge
>
>
> --
> Simon Ruckledge
> Partner
>
> studio fortynine website design
> www.studiofortynine.com
> tel: 01977 619832
>
>

[Simon Ruckledge]

Got a message back from fusion help. I skipped using the self extract and
extracted them myself to afolder then run the install, now installed and no
problems. looking forward to getting in and taking a look

Thanks
Simon


"Simon Ruckledge" <simon@studio49online.com> wrote in message
news:dl0vvf$qhr17@news01.netobjects.com...
> No Joy as such, I managed to egt it on my old computer but im migrating
> toa
> new faster machine. Its running xp profffesional. It has version 7 on it,
> upgrade 8 and trying to upgrade 9. same messages as before. This old comp
> runs windows 98se
>
> Thanks
>
>
> "Chuck «BeyondFusion»" <chuck@beyond-nospam-fusion.com> wrote in message
> news:dl0sqg$qi64@news01.netobjects.com...
>> Reboot so you'll hopefully kill off any setup processes that've already
>> started and failed.
>>
>> Then, make a folder and extracting the setup files into it.
>>
>> Then run Setup from there.
>>
>> --
>> Chuck Joslin - Team NetObjects
>> BeyondFusion.com - Your Fusion Community
>> www.beyondfusion.com
>>
>> Fusion Wish List - www.beyondfusion.com/wish
>> Register domain names at www.awavedomains.com
>>
>> "Simon Ruckledge" <simon@studio49online.com> wrote in message
>> news:dl0slr$qhr9@news01.netobjects.com...
>> > Still no luck, anymore ideas? Same questions from installtion, cant
>> > find
>> > setup.ini, layout.bin etc
>> >
>> > Thanks
>> >
>> > Simon
>> > "Chuck «BeyondFusion»" <chuck@beyond-nospam-fusion.com> wrote in
>> > message
>> > news:dl0rv3$qi61@news01.netobjects.com...
>> >> Simon,
>> >>
>> >> Try emptying your temp folders. Both inside the Windows folder and
>> >> your
>> > user
>> >> temp folders.
>> >>
>> >> Leftover files in there can cause problems with installations of
> software
>> >> sometimes.
>> >>
>> >> --
>> >> Chuck Joslin - Team NetObjects
>> >> Committed to helping you build better websites
>> >>
>> >> BeyondFusion.com - Your Fusion Community
>> >> www.beyondfusion.com
>> >>
>> >> Fusion Wish List - www.beyondfusion.com/wish
>> >> Register domain names at www.awavedomains.com
>> >>
>> >> "Simon Ruckledge" <simon@studio49online.com> wrote in message
>> >> news:dl0rlp$qhr5@news01.netobjects.com...
>> >> > Tried that and no luck, same message, trying to install on windows
>> >> > xp
>> >> > proffesional, clean computer with version 7 and 8 (upgrade on).
>> >> > Still
>> > same
>> >> > message after new download
>> >> >
>> >> > Thanks
>> >> >
>> >> > Simon
>> >> > "Chuck «BeyondFusion»" <chuck@beyond-nospam-fusion.com> wrote in
>> >> > message
>> >> > news:dl0p2u$qfv9@news01.netobjects.com...
>> >> >> Simon,
>> >> >>
>> >> >> Sounds like a bad download. I'd redownload it and try again.
>> >> >>
>> >> >> --
>> >> >> Chuck Joslin - Team NetObjects
>> >> >> Committed to helping you build better websites
>> >> >>
>> >> >> BeyondFusion.com - Your Fusion Community
>> >> >> www.beyondfusion.com
>> >> >>
>> >> >> Fusion Wish List - www.beyondfusion.com/wish
>> >> >> Register domain names at www.awavedomains.com
>> >> >>
>> >> >> "Simon Ruckledge" <simon@studio49online.com> wrote in message
>> >> >> news:dl0nnp$qfv8@news01.netobjects.com...
>> >> >> > Hi
>> >> >> >
>> >> >> > Just purchased fusion 9 upgrade. Downloaded it and clicked to
>> > install.
>> >> > It
>> >> >> > asks me "please insert disk 1 that contains the file layout.bin"
>> > Where
>> >> >> > should it be looking, the fusion 8 upgarde cd or prevoius version
> or
>> > a
>> >> >> > folder somewhere. Some have been downloaded so dont have all cds.
>> >> >> > Not
>> >> > sure
>> >> >> > what this means or what I should do?
>> >> >> >
>> >> >> > Thanks in advance
>> >> >> >
>> >> >> >
>> >> >> > Simon Ruckledge
>> >> >> >
>> >> >> >
>> >> >> > --
>> >> >> > Simon Ruckledge
>> >> >> > Partner
>> >> >> >
>> >> >> > studio fortynine website design
>> >> >> > www.studiofortynine.com
>> >> >> > tel: 01977 619832
>> >> >> >
>> >> >> >
>> >> >>
>> >> >>
>> >> >
>> >> >
>> >>
>> >>
>> >
>> >
>>
>>
>
>