I wasn't talking about manually unzipping. I was talking about manually
closing the unzip window.

In your screenshots, something that caught my attention is the big Norton in
the lower right corner.

Try disabling anything Norton and see if things start working.

It's been known to block things you'd never think it would block. It's an
extremely intrusuve product.

--
Chuck Joslin - Team NetObjects
BeyondFusion.com - Your Fusion Community
www.beyondfusion.com

Fusion Wish List - www.beyondfusion.com/wish
Register domain names at www.awavedomains.com

"G. Williams" <gwilliams@marketcom123.com> wrote in message
news:dpm6a9$6s61@news01.netobjects.com...
> Oh, I know what you're speaking of Chuck, No I do not manually unzip and
> let everything install automatically.
>
> Glen W.
>
>
> "Chuck «BeyondFusion»" <supportno@spambeyondfusion.com> wrote in message
> news:dpl4dl$6e63@news01.netobjects.com...
>> Don't close them manually. I'm speaking of the self-extracting zip window
>> in particular.
>>
>> Clicking on the X to close the window can result in an incomplete
>> installation.
>>
>> --
>> Chuck Joslin - Team NetObjects
>> BeyondFusion.com - Your Fusion Community
>> www.beyondfusion.com
>>
>> Fusion Wish List - www.beyondfusion.com/wish
>> Register domain names at www.awavedomains.com
>>
>> "G. Williams" <gwilliams@marketcom123.com> wrote in message
>> news:dpks0a$6cc7@news01.netobjects.com...
>>> 3rd party components are in the NOF 9 folder
>>>
>>>> And you do allow all installation windows to close on their own when
>>>> installing Fusion, I presume. Very important.
>>> (???) All installation windows to close on the own? How do I make sure
>>> that is happening?
>>>
>>> Thanks,
>>>
>>>
>>> --
>>> G. Williams
>>> 314.367.1073
>>> www.Marketcom123.com
>>> www.AmericaShopsHere.com
>>> "Chuck «BeyondFusion»" <supportno@spambeyondfusion.com> wrote in message
>>> news:dpknus$6cu4@news01.netobjects.com...
>>>> Glen,
>>>>
>>>> Do you have any 3rd party components installed in the 9 components
>>>> folder?
>>>>
>>>> Old versions have been known to make the new components in 9 fail to
>>>> initialize.
>>>>
>>>> And you do allow all installation windows to close on their own when
>>>> installing Fusion, I presume. Very important.
>>>>
>>>> --
>>>> Chuck Joslin - Team NetObjects
>>>> BeyondFusion.com - Your Fusion Community
>>>> www.beyondfusion.com
>>>>
>>>> Fusion Wish List - www.beyondfusion.com/wish
>>>> Register domain names at www.awavedomains.com
>>>>
>>>> "G. Williams" <gwilliams@marketcom123.com> wrote in message
>>>> news:dpkmh1$6cu3@news01.netobjects.com...
>>>>> Yes, Chuck, that was one of the first things I did. As far as I know
>>>>> it may not have anything to do with MSVS 05 at all. I just noticed the
>>>>> toolbars and style were not functioning a little while after I had
>>>>> installed Studio. It is a complete mystery to me. I did however, dug
>>>>> out and installed an old NOF 7.0 version to see if there were any
>>>>> problems, and to my surprise it seemed to have all functions working
>>>>> properly. I checked the registry for 7.0 and 9.0 with reg edit and
>>>>> didn't see any discrepencies, but I don't know a damn thing about
>>>>> Windows registry, only to not monkey around with it if you don't know
>>>>> what you're doing. So the mystery continues.
>>>>>
>>>>> Glen W.
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> "Chuck «BeyondFusion»" <supportno@spambeyondfusion.com> wrote in
>>>>> message news:dpkksj$6cu1@news01.netobjects.com...
>>>>>> Glen,
>>>>>>
>>>>>> This issue has been reported by a couple of people. But others
>>>>>> running VS 2003 or 2005 have no problems.
>>>>>>
>>>>>> No pattern has emerged yet that I'm aware of.
>>>>>>
>>>>>> Have you tried installing VS and then uninstalling and reinstalling
>>>>>> Fusion 9?
>>>>>>
>>>>>> --
>>>>>> Chuck Joslin - Team NetObjects
>>>>>> BeyondFusion.com - Your Fusion Community
>>>>>> www.beyondfusion.com
>>>>>>
>>>>>> Fusion Wish List - www.beyondfusion.com/wish
>>>>>> Register domain names at www.awavedomains.com
>>>>>>
>>>>>> "G. Williams" <gwilliams@marketcom123.com> wrote in message
>>>>>> news:dpkkgb$6cc4@news01.netobjects.com...
>>>>>>> Just tried. Went to MS site and got the latest, which I may have
>>>>>>> done already, but still the same NOF problems. The funny thing is
>>>>>>> even if I uninstall Visual Studio the problems are still there. It
>>>>>>> must do something deep inside the registry or something. I thought
>>>>>>> about System Restore but I don't have it set to go back to the
>>>>>>> beginning or December. I've looked everywhere, but can't find
>>>>>>> anything the pertains to the conflicts (if that's the problem).
>>>>>>> Glen W.
>>>>>>>
>>>>>>>
>>>>>>> --
>>>>>>>
>>>>>>>
>>>>>>> "Chuck «BeyondFusion»" <supportno@spambeyondfusion.com> wrote in
>>>>>>> message news:dpkic4$6cc2@news01.netobjects.com...
>>>>>>>> GW,
>>>>>>>>
>>>>>>>> Do you have the latest .NET update?
>>>>>>>>
>>>>>>>> Someone else has theorized that an older version of .NET 2.0 may be
>>>>>>>> the culprit.
>>>>>>>>
>>>>>>>> --
>>>>>>>> Chuck Joslin - Team NetObjects
>>>>>>>> BeyondFusion.com - Your Fusion Community
>>>>>>>> www.beyondfusion.com
>>>>>>>>
>>>>>>>> Fusion Wish List - www.beyondfusion.com/wish
>>>>>>>> Register domain names at www.awavedomains.com
>>>>>>>>
>>>>>>>> "G. Williams" <gwilliams@marketcom123.com> wrote in message
>>>>>>>> news:dpkdm7$6975@news01.netobjects.com...
>>>>>>>>> I'm still not being able to view advanced components or styles. I
>>>>>>>>> believe this happened right after I installed MS Visual Studio
>>>>>>>>> 2005 on my system. The VS is on another drive and it installed
>>>>>>>>> without any problems or notices. However, NOF 8 and 9 opens and it
>>>>>>>>> has publishing ability but there are no advanced tools or styles.
>>>>>>>>> I've looked all over the web and found sometimes J# or SQL can
>>>>>>>>> sometime interfere. I've deleted both and still no luck. Can
>>>>>>>>> anyone help?
>>>>>>>>>
>>>>>>>>> GW
>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>
>>>

>>
>>

>
>