-
Chuck «BeyondFusion»
Guest
Re: E-Commerce confusion
Bob,
CC info is collected on the shopping cart side.
The e-comm component is used to create a catalog. Then you connect it to a
cart engine. Shop Pro is one...but you would need to install it on a secure
server.
Look into using Mal's e-commerce as an alternative. www.mals-e.com
Mal's is one of the "engines" supported out of the box in Fusion. Mal's
provides a secure server, so you don't have to worry about that part.
When a sale occurs, you're notified via email and you then login to Mal's to
collect the payment info.
--
Chuck Joslin - Team NetObjects
BeyondFusion.com - Your Fusion Community
www.beyondfusion.com
Fusion Wish List - www.beyondfusion.com/wish
Register domain names at www.awavedomains.com
"Bob" <bobcartwright@btconnect.com> wrote in message
news:dsvhak$kan1@news01.netobjects.com...
> Thanks Chris,
>
> I've just read it, but I'm still confused over the next stage, after I've
> added the the product, where or how do I configure the enter credit card
> payment section?
>
> I gather the email with go to the email address I set up initially, does
> this include card data? If so how can I make it secure?
>
> Is there no where I can go for this as a how to? Surely it is one of the
> main objectives of such good software to make this easy?
>
> Sorry, perhaps I'm being a bit dim here...
>
> Cheers
>
> Bob
>
> "Chris (NetObjects)" <cdolan@netobjects.com> wrote in message
> news:<dsv55m$k6m3@news01.netobjects.com>...
>
>> Hi Bob
>
>>
>
>> Shop Pro is one of the Shopping Cart Store Engine options in NetObjects
>
>> Fusion in either PHP or Perl versions. This solution could be what you
> need,
>
>> as you are going to process cards offline.
>
>>
>
>> C:\Program Files\NetObjects\NetObjects Fusion 9.0\NetObjects
>
>> System\FSI\Ecomm\lib\store\engine\Shoppro.PHP\shop pro_readme_php_en.html
>
>>
>
>> You probably have the file above installed on your Fusion 9 installation,
> in
>
>> that document, (linked to from the E.Commerce Tool) it explains alot more
>
>> about how to setup and configure Shop Pro.
>
>>
>
>> Chris
>
>> NetObjects
>
>>
>
>>
>
>> "Bob" <bobcartwright@btconnect.com> wrote in message
>
>> news:dsuva5$k3o1@news01.netobjects.com...
>
>> > Just taken delivery of V9, but still using V8 to produce websites.
>
>> >
>
>> > I have a small shop with a PDQ credit card machine and want to take
> orders
>
>> > via the net and the shopping cart of Fusion.
>
>> >
>
>> > Just confused over how to do this. I understand adding the products to
> the
>
>> > cart, but how do I get card details sent to me securely so I can
>> > process
>
>> > them on the machine?
>
>> >
>
>> > The help section with the software leaves a lot to be desired, so any
>
>> > pointers would be greatefully recieved.
>
>> >
>
>> > Cheers
>
>> >
>
>> > bob
>
>> >
>
>> >
>
>>
>
>>
>
> "Chris (NetObjects)" <cdolan@netobjects.com> wrote in message
> news:dsv55m$k6m3@news01.netobjects.com...
>> Hi Bob
>>
>> Shop Pro is one of the Shopping Cart Store Engine options in NetObjects
>> Fusion in either PHP or Perl versions. This solution could be what you
> need,
>> as you are going to process cards offline.
>>
>> C:\Program Files\NetObjects\NetObjects Fusion 9.0\NetObjects
>> System\FSI\Ecomm\lib\store\engine\Shoppro.PHP\shop pro_readme_php_en.html
>>
>> You probably have the file above installed on your Fusion 9 installation,
> in
>> that document, (linked to from the E.Commerce Tool) it explains alot more
>> about how to setup and configure Shop Pro.
>>
>> Chris
>> NetObjects
>>
>>
>> "Bob" <bobcartwright@btconnect.com> wrote in message
>> news:dsuva5$k3o1@news01.netobjects.com...
>> > Just taken delivery of V9, but still using V8 to produce websites.
>> >
>> > I have a small shop with a PDQ credit card machine and want to take
> orders
>> > via the net and the shopping cart of Fusion.
>> >
>> > Just confused over how to do this. I understand adding the products to
> the
>> > cart, but how do I get card details sent to me securely so I can
>> > process
>> > them on the machine?
>> >
>> > The help section with the software leaves a lot to be desired, so any
>> > pointers would be greatefully recieved.
>> >
>> > Cheers
>> >
>> > bob
>> >
>> >
>>
>>
>
>
-
Re: E-Commerce confusion
Thanks Chris,
I've just read it, but I'm still confused over the next stage, after I've
added the the product, where or how do I configure the enter credit card
payment section?
I gather the email with go to the email address I set up initially, does
this include card data? If so how can I make it secure?
Is there no where I can go for this as a how to? Surely it is one of the
main objectives of such good software to make this easy?
Sorry, perhaps I'm being a bit dim here...
Cheers
Bob
"Chris (NetObjects)" <cdolan@netobjects.com> wrote in message
news:<dsv55m$k6m3@news01.netobjects.com>...
> Hi Bob
>
> Shop Pro is one of the Shopping Cart Store Engine options in NetObjects
> Fusion in either PHP or Perl versions. This solution could be what you
need,
> as you are going to process cards offline.
>
> C:\Program Files\NetObjects\NetObjects Fusion 9.0\NetObjects
> System\FSI\Ecomm\lib\store\engine\Shoppro.PHP\shop pro_readme_php_en.html
>
> You probably have the file above installed on your Fusion 9 installation,
in
> that document, (linked to from the E.Commerce Tool) it explains alot more
> about how to setup and configure Shop Pro.
>
> Chris
> NetObjects
>
>
> "Bob" <bobcartwright@btconnect.com> wrote in message
> news:dsuva5$k3o1@news01.netobjects.com...
> > Just taken delivery of V9, but still using V8 to produce websites.
> >
> > I have a small shop with a PDQ credit card machine and want to take
orders
> > via the net and the shopping cart of Fusion.
> >
> > Just confused over how to do this. I understand adding the products to
the
> > cart, but how do I get card details sent to me securely so I can process
> > them on the machine?
> >
> > The help section with the software leaves a lot to be desired, so any
> > pointers would be greatefully recieved.
> >
> > Cheers
> >
> > bob
> >
> >
>
>
"Chris (NetObjects)" <cdolan@netobjects.com> wrote in message
news:dsv55m$k6m3@news01.netobjects.com...
> Hi Bob
>
> Shop Pro is one of the Shopping Cart Store Engine options in NetObjects
> Fusion in either PHP or Perl versions. This solution could be what you
need,
> as you are going to process cards offline.
>
> C:\Program Files\NetObjects\NetObjects Fusion 9.0\NetObjects
> System\FSI\Ecomm\lib\store\engine\Shoppro.PHP\shop pro_readme_php_en.html
>
> You probably have the file above installed on your Fusion 9 installation,
in
> that document, (linked to from the E.Commerce Tool) it explains alot more
> about how to setup and configure Shop Pro.
>
> Chris
> NetObjects
>
>
> "Bob" <bobcartwright@btconnect.com> wrote in message
> news:dsuva5$k3o1@news01.netobjects.com...
> > Just taken delivery of V9, but still using V8 to produce websites.
> >
> > I have a small shop with a PDQ credit card machine and want to take
orders
> > via the net and the shopping cart of Fusion.
> >
> > Just confused over how to do this. I understand adding the products to
the
> > cart, but how do I get card details sent to me securely so I can process
> > them on the machine?
> >
> > The help section with the software leaves a lot to be desired, so any
> > pointers would be greatefully recieved.
> >
> > Cheers
> >
> > bob
> >
> >
>
>
-
Re: E-Commerce confusion
Thanks Chris,
I've just read it, but I'm still confused over the next stage, after I've
added the the product, where or how do I configure the enter credit card
payment section?
I gather the email with go to the email address I set up initially, does
this include card data? If so how can I make it secure?
Is there no where I can go for this as a how to? Surely it is one of the
main objectives of such good software to make this easy?
Sorry, perhaps I'm being a bit dim here...
Cheers
Bob
-
Chris \(NetObjects\)
Guest
Re: E-Commerce confusion
Hi Bob
Shop Pro is one of the Shopping Cart Store Engine options in NetObjects
Fusion in either PHP or Perl versions. This solution could be what you need,
as you are going to process cards offline.
C:\Program Files\NetObjects\NetObjects Fusion 9.0\NetObjects
System\FSI\Ecomm\lib\store\engine\Shoppro.PHP\shop pro_readme_php_en.html
You probably have the file above installed on your Fusion 9 installation, in
that document, (linked to from the E.Commerce Tool) it explains alot more
about how to setup and configure Shop Pro.
Chris
NetObjects
"Bob" <bobcartwright@btconnect.com> wrote in message
news:dsuva5$k3o1@news01.netobjects.com...
> Just taken delivery of V9, but still using V8 to produce websites.
>
> I have a small shop with a PDQ credit card machine and want to take orders
> via the net and the shopping cart of Fusion.
>
> Just confused over how to do this. I understand adding the products to the
> cart, but how do I get card details sent to me securely so I can process
> them on the machine?
>
> The help section with the software leaves a lot to be desired, so any
> pointers would be greatefully recieved.
>
> Cheers
>
> bob
>
>
-
E-Commerce confusion
Just taken delivery of V9, but still using V8 to produce websites.
I have a small shop with a PDQ credit card machine and want to take orders
via the net and the shopping cart of Fusion.
Just confused over how to do this. I understand adding the products to the
cart, but how do I get card details sent to me securely so I can process
them on the machine?
The help section with the software leaves a lot to be desired, so any
pointers would be greatefully recieved.
Cheers
bob
-
Chuck «BeyondFusion»
Guest
Re: E-Commerce confusion
Bob,
Yes, you can have a single database supporting multiple sites.
I've done just that using Fusion/PHP/MySQL for (currently) four different
sites.
Products appear on some or all of the sites. That's an option in the
database.
I do this with all custom code I write. I'd hate to try and do the same
thing using the built-in DB component.
First the database is designed and then snippets of PHP code or includes to
external PHP files are inserted using the code insertion points in Fusion.
Been dong it since Fusion MX, eons ago.
--
Chuck Joslin - Team NetObjects
BeyondFusion.com - Your Fusion Community
www.beyondfusion.com
Fusion Wish List - www.beyondfusion.com/wish
Register domain names at www.awavedomains.com
"Bob" <bobcartwright@btconnect.com> wrote in message
news:dtsnvs$rpg3@news01.netobjects.com...
> Right Chuck, I'm starting to get the idea, thanks for that.
>
> What I would like to do is use database integration and have one master
> database which has fields containing, product info, prices, images etc and
> have that linked to several different sites which select out of the
> database
> the products relevant to them.
>
> Is this possible in Fusion? I am just starting to try and get this work
> and
> wondering if it is beyond the program?
>
> Thanks for you help, just looking at Mals now. Interesting.
>
> Cheers
>
> Bob
>
>
> "Chuck «BeyondFusion»" <supportno@spambeyondfusion.com> wrote in message
> news:dsvi3o$kbm4@news01.netobjects.com...
>> Bob,
>>
>> CC info is collected on the shopping cart side.
>>
>> The e-comm component is used to create a catalog. Then you connect it to
>> a
>> cart engine. Shop Pro is one...but you would need to install it on a
> secure
>> server.
>>
>> Look into using Mal's e-commerce as an alternative. www.mals-e.com
>>
>> Mal's is one of the "engines" supported out of the box in Fusion. Mal's
>> provides a secure server, so you don't have to worry about that part.
>>
>> When a sale occurs, you're notified via email and you then login to Mal's
> to
>> collect the payment info.
>>
>> --
>> Chuck Joslin - Team NetObjects
>> BeyondFusion.com - Your Fusion Community
>> www.beyondfusion.com
>>
>> Fusion Wish List - www.beyondfusion.com/wish
>> Register domain names at www.awavedomains.com
>>
>> "Bob" <bobcartwright@btconnect.com> wrote in message
>> news:dsvhak$kan1@news01.netobjects.com...
>> > Thanks Chris,
>> >
>> > I've just read it, but I'm still confused over the next stage, after
> I've
>> > added the the product, where or how do I configure the enter credit
>> > card
>> > payment section?
>> >
>> > I gather the email with go to the email address I set up initially,
>> > does
>> > this include card data? If so how can I make it secure?
>> >
>> > Is there no where I can go for this as a how to? Surely it is one of
>> > the
>> > main objectives of such good software to make this easy?
>> >
>> > Sorry, perhaps I'm being a bit dim here...
>> >
>> > Cheers
>> >
>> > Bob
>> >
>> > "Chris (NetObjects)" <cdolan@netobjects.com> wrote in message
>> > news:<dsv55m$k6m3@news01.netobjects.com>...
>> >
>> >> Hi Bob
>> >
>> >>
>> >
>> >> Shop Pro is one of the Shopping Cart Store Engine options in
>> >> NetObjects
>> >
>> >> Fusion in either PHP or Perl versions. This solution could be what you
>> > need,
>> >
>> >> as you are going to process cards offline.
>> >
>> >>
>> >
>> >> C:\Program Files\NetObjects\NetObjects Fusion 9.0\NetObjects
>> >
>> >>
> System\FSI\Ecomm\lib\store\engine\Shoppro.PHP\shop pro_readme_php_en.html
>> >
>> >>
>> >
>> >> You probably have the file above installed on your Fusion 9
> installation,
>> > in
>> >
>> >> that document, (linked to from the E.Commerce Tool) it explains alot
> more
>> >
>> >> about how to setup and configure Shop Pro.
>> >
>> >>
>> >
>> >> Chris
>> >
>> >> NetObjects
>> >
>> >>
>> >
>> >>
>> >
>> >> "Bob" <bobcartwright@btconnect.com> wrote in message
>> >
>> >> news:dsuva5$k3o1@news01.netobjects.com...
>> >
>> >> > Just taken delivery of V9, but still using V8 to produce websites.
>> >
>> >> >
>> >
>> >> > I have a small shop with a PDQ credit card machine and want to take
>> > orders
>> >
>> >> > via the net and the shopping cart of Fusion.
>> >
>> >> >
>> >
>> >> > Just confused over how to do this. I understand adding the products
> to
>> > the
>> >
>> >> > cart, but how do I get card details sent to me securely so I can
>> >> > process
>> >
>> >> > them on the machine?
>> >
>> >> >
>> >
>> >> > The help section with the software leaves a lot to be desired, so
>> >> > any
>> >
>> >> > pointers would be greatefully recieved.
>> >
>> >> >
>> >
>> >> > Cheers
>> >
>> >> >
>> >
>> >> > bob
>> >
>> >> >
>> >
>> >> >
>> >
>> >>
>> >
>> >>
>> >
>> > "Chris (NetObjects)" <cdolan@netobjects.com> wrote in message
>> > news:dsv55m$k6m3@news01.netobjects.com...
>> >> Hi Bob
>> >>
>> >> Shop Pro is one of the Shopping Cart Store Engine options in
>> >> NetObjects
>> >> Fusion in either PHP or Perl versions. This solution could be what you
>> > need,
>> >> as you are going to process cards offline.
>> >>
>> >> C:\Program Files\NetObjects\NetObjects Fusion 9.0\NetObjects
>> >>
> System\FSI\Ecomm\lib\store\engine\Shoppro.PHP\shop pro_readme_php_en.html
>> >>
>> >> You probably have the file above installed on your Fusion 9
> installation,
>> > in
>> >> that document, (linked to from the E.Commerce Tool) it explains alot
> more
>> >> about how to setup and configure Shop Pro.
>> >>
>> >> Chris
>> >> NetObjects
>> >>
>> >>
>> >> "Bob" <bobcartwright@btconnect.com> wrote in message
>> >> news:dsuva5$k3o1@news01.netobjects.com...
>> >> > Just taken delivery of V9, but still using V8 to produce websites.
>> >> >
>> >> > I have a small shop with a PDQ credit card machine and want to take
>> > orders
>> >> > via the net and the shopping cart of Fusion.
>> >> >
>> >> > Just confused over how to do this. I understand adding the products
> to
>> > the
>> >> > cart, but how do I get card details sent to me securely so I can
>> >> > process
>> >> > them on the machine?
>> >> >
>> >> > The help section with the software leaves a lot to be desired, so
>> >> > any
>> >> > pointers would be greatefully recieved.
>> >> >
>> >> > Cheers
>> >> >
>> >> > bob
>> >> >
>> >> >
>> >>
>> >>
>> >
>> >
>>
>>
>
>
-
Re: E-Commerce confusion
Right Chuck, I'm starting to get the idea, thanks for that.
What I would like to do is use database integration and have one master
database which has fields containing, product info, prices, images etc and
have that linked to several different sites which select out of the database
the products relevant to them.
Is this possible in Fusion? I am just starting to try and get this work and
wondering if it is beyond the program?
Thanks for you help, just looking at Mals now. Interesting.
Cheers
Bob
"Chuck «BeyondFusion»" <supportno@spambeyondfusion.com> wrote in message
news:dsvi3o$kbm4@news01.netobjects.com...
> Bob,
>
> CC info is collected on the shopping cart side.
>
> The e-comm component is used to create a catalog. Then you connect it to a
> cart engine. Shop Pro is one...but you would need to install it on a
secure
> server.
>
> Look into using Mal's e-commerce as an alternative. www.mals-e.com
>
> Mal's is one of the "engines" supported out of the box in Fusion. Mal's
> provides a secure server, so you don't have to worry about that part.
>
> When a sale occurs, you're notified via email and you then login to Mal's
to
> collect the payment info.
>
> --
> Chuck Joslin - Team NetObjects
> BeyondFusion.com - Your Fusion Community
> www.beyondfusion.com
>
> Fusion Wish List - www.beyondfusion.com/wish
> Register domain names at www.awavedomains.com
>
> "Bob" <bobcartwright@btconnect.com> wrote in message
> news:dsvhak$kan1@news01.netobjects.com...
> > Thanks Chris,
> >
> > I've just read it, but I'm still confused over the next stage, after
I've
> > added the the product, where or how do I configure the enter credit card
> > payment section?
> >
> > I gather the email with go to the email address I set up initially, does
> > this include card data? If so how can I make it secure?
> >
> > Is there no where I can go for this as a how to? Surely it is one of the
> > main objectives of such good software to make this easy?
> >
> > Sorry, perhaps I'm being a bit dim here...
> >
> > Cheers
> >
> > Bob
> >
> > "Chris (NetObjects)" <cdolan@netobjects.com> wrote in message
> > news:<dsv55m$k6m3@news01.netobjects.com>...
> >
> >> Hi Bob
> >
> >>
> >
> >> Shop Pro is one of the Shopping Cart Store Engine options in NetObjects
> >
> >> Fusion in either PHP or Perl versions. This solution could be what you
> > need,
> >
> >> as you are going to process cards offline.
> >
> >>
> >
> >> C:\Program Files\NetObjects\NetObjects Fusion 9.0\NetObjects
> >
> >>
System\FSI\Ecomm\lib\store\engine\Shoppro.PHP\shop pro_readme_php_en.html
> >
> >>
> >
> >> You probably have the file above installed on your Fusion 9
installation,
> > in
> >
> >> that document, (linked to from the E.Commerce Tool) it explains alot
more
> >
> >> about how to setup and configure Shop Pro.
> >
> >>
> >
> >> Chris
> >
> >> NetObjects
> >
> >>
> >
> >>
> >
> >> "Bob" <bobcartwright@btconnect.com> wrote in message
> >
> >> news:dsuva5$k3o1@news01.netobjects.com...
> >
> >> > Just taken delivery of V9, but still using V8 to produce websites.
> >
> >> >
> >
> >> > I have a small shop with a PDQ credit card machine and want to take
> > orders
> >
> >> > via the net and the shopping cart of Fusion.
> >
> >> >
> >
> >> > Just confused over how to do this. I understand adding the products
to
> > the
> >
> >> > cart, but how do I get card details sent to me securely so I can
> >> > process
> >
> >> > them on the machine?
> >
> >> >
> >
> >> > The help section with the software leaves a lot to be desired, so any
> >
> >> > pointers would be greatefully recieved.
> >
> >> >
> >
> >> > Cheers
> >
> >> >
> >
> >> > bob
> >
> >> >
> >
> >> >
> >
> >>
> >
> >>
> >
> > "Chris (NetObjects)" <cdolan@netobjects.com> wrote in message
> > news:dsv55m$k6m3@news01.netobjects.com...
> >> Hi Bob
> >>
> >> Shop Pro is one of the Shopping Cart Store Engine options in NetObjects
> >> Fusion in either PHP or Perl versions. This solution could be what you
> > need,
> >> as you are going to process cards offline.
> >>
> >> C:\Program Files\NetObjects\NetObjects Fusion 9.0\NetObjects
> >>
System\FSI\Ecomm\lib\store\engine\Shoppro.PHP\shop pro_readme_php_en.html
> >>
> >> You probably have the file above installed on your Fusion 9
installation,
> > in
> >> that document, (linked to from the E.Commerce Tool) it explains alot
more
> >> about how to setup and configure Shop Pro.
> >>
> >> Chris
> >> NetObjects
> >>
> >>
> >> "Bob" <bobcartwright@btconnect.com> wrote in message
> >> news:dsuva5$k3o1@news01.netobjects.com...
> >> > Just taken delivery of V9, but still using V8 to produce websites.
> >> >
> >> > I have a small shop with a PDQ credit card machine and want to take
> > orders
> >> > via the net and the shopping cart of Fusion.
> >> >
> >> > Just confused over how to do this. I understand adding the products
to
> > the
> >> > cart, but how do I get card details sent to me securely so I can
> >> > process
> >> > them on the machine?
> >> >
> >> > The help section with the software leaves a lot to be desired, so any
> >> > pointers would be greatefully recieved.
> >> >
> >> > Cheers
> >> >
> >> > bob
> >> >
> >> >
> >>
> >>
> >
> >
>
>
-
Chuck «BeyondFusion»
Guest
Re: E-Commerce confusion
Bob,
Contact me off-group and I'll give you a couple of URLs to look at.
Fusion/PHP/MySQL/Mal's are a useful combination. (-:
chuck at beyondfusion dot com
--
Chuck Joslin - Team NetObjects
BeyondFusion.com - Your Fusion Community
www.beyondfusion.com
Fusion Wish List - www.beyondfusion.com/wish
Register domain names at www.awavedomains.com
"Bob" <bobcartwright@btconnect.com> wrote in message
news:du4crs$7l1@news01.netobjects.com...
> Okay Chuck, it sounds like this would be slightly beyond my understanding
> of
> Fusion.
>
> What skills would I ask for and what type of person should I be looking
> for
> to help me through this? Database progammer, 'C' etc?
>
> Also can you supply the website address of one of these sites you mention.
> I
> would like to see what you've done.
>
> Cheers
>
> Bob
>
> "Chuck «BeyondFusion»" <supportno@spambeyondfusion.com> wrote in message
> news:dttdcm$rui1@news01.netobjects.com...
>> Bob,
>>
>> Yes, you can have a single database supporting multiple sites.
>>
>> I've done just that using Fusion/PHP/MySQL for (currently) four different
>> sites.
>>
>> Products appear on some or all of the sites. That's an option in the
>> database.
>>
>> I do this with all custom code I write. I'd hate to try and do the same
>> thing using the built-in DB component.
>>
>> First the database is designed and then snippets of PHP code or includes
> to
>> external PHP files are inserted using the code insertion points in
>> Fusion.
>>
>> Been dong it since Fusion MX, eons ago.
>>
>> --
>> Chuck Joslin - Team NetObjects
>> BeyondFusion.com - Your Fusion Community
>> www.beyondfusion.com
>>
>> Fusion Wish List - www.beyondfusion.com/wish
>> Register domain names at www.awavedomains.com
>>
>> "Bob" <bobcartwright@btconnect.com> wrote in message
>> news:dtsnvs$rpg3@news01.netobjects.com...
>> > Right Chuck, I'm starting to get the idea, thanks for that.
>> >
>> > What I would like to do is use database integration and have one master
>> > database which has fields containing, product info, prices, images etc
> and
>> > have that linked to several different sites which select out of the
>> > database
>> > the products relevant to them.
>> >
>> > Is this possible in Fusion? I am just starting to try and get this work
>> > and
>> > wondering if it is beyond the program?
>> >
>> > Thanks for you help, just looking at Mals now. Interesting.
>> >
>> > Cheers
>> >
>> > Bob
>> >
>> >
>> > "Chuck «BeyondFusion»" <supportno@spambeyondfusion.com> wrote in
>> > message
>> > news:dsvi3o$kbm4@news01.netobjects.com...
>> >> Bob,
>> >>
>> >> CC info is collected on the shopping cart side.
>> >>
>> >> The e-comm component is used to create a catalog. Then you connect it
> to
>> >> a
>> >> cart engine. Shop Pro is one...but you would need to install it on a
>> > secure
>> >> server.
>> >>
>> >> Look into using Mal's e-commerce as an alternative. www.mals-e.com
>> >>
>> >> Mal's is one of the "engines" supported out of the box in Fusion.
>> >> Mal's
>> >> provides a secure server, so you don't have to worry about that part.
>> >>
>> >> When a sale occurs, you're notified via email and you then login to
> Mal's
>> > to
>> >> collect the payment info.
>> >>
>> >> --
>> >> Chuck Joslin - Team NetObjects
>> >> BeyondFusion.com - Your Fusion Community
>> >> www.beyondfusion.com
>> >>
>> >> Fusion Wish List - www.beyondfusion.com/wish
>> >> Register domain names at www.awavedomains.com
>> >>
>> >> "Bob" <bobcartwright@btconnect.com> wrote in message
>> >> news:dsvhak$kan1@news01.netobjects.com...
>> >> > Thanks Chris,
>> >> >
>> >> > I've just read it, but I'm still confused over the next stage, after
>> > I've
>> >> > added the the product, where or how do I configure the enter credit
>> >> > card
>> >> > payment section?
>> >> >
>> >> > I gather the email with go to the email address I set up initially,
>> >> > does
>> >> > this include card data? If so how can I make it secure?
>> >> >
>> >> > Is there no where I can go for this as a how to? Surely it is one of
>> >> > the
>> >> > main objectives of such good software to make this easy?
>> >> >
>> >> > Sorry, perhaps I'm being a bit dim here...
>> >> >
>> >> > Cheers
>> >> >
>> >> > Bob
>> >> >
>> >> > "Chris (NetObjects)" <cdolan@netobjects.com> wrote in message
>> >> > news:<dsv55m$k6m3@news01.netobjects.com>...
>> >> >
>> >> >> Hi Bob
>> >> >
>> >> >>
>> >> >
>> >> >> Shop Pro is one of the Shopping Cart Store Engine options in
>> >> >> NetObjects
>> >> >
>> >> >> Fusion in either PHP or Perl versions. This solution could be what
>> >> >> y
> ou
>> >> > need,
>> >> >
>> >> >> as you are going to process cards offline.
>> >> >
>> >> >>
>> >> >
>> >> >> C:\Program Files\NetObjects\NetObjects Fusion 9.0\NetObjects
>> >> >
>> >> >>
>> > System\FSI\Ecomm\lib\store\engine\Shoppro.PHP\shop pro_readme_php_en.html
>> >> >
>> >> >>
>> >> >
>> >> >> You probably have the file above installed on your Fusion 9
>> > installation,
>> >> > in
>> >> >
>> >> >> that document, (linked to from the E.Commerce Tool) it explains
>> >> >> alot
>> > more
>> >> >
>> >> >> about how to setup and configure Shop Pro.
>> >> >
>> >> >>
>> >> >
>> >> >> Chris
>> >> >
>> >> >> NetObjects
>> >> >
>> >> >>
>> >> >
>> >> >>
>> >> >
>> >> >> "Bob" <bobcartwright@btconnect.com> wrote in message
>> >> >
>> >> >> news:dsuva5$k3o1@news01.netobjects.com...
>> >> >
>> >> >> > Just taken delivery of V9, but still using V8 to produce
>> >> >> > websites.
>> >> >
>> >> >> >
>> >> >
>> >> >> > I have a small shop with a PDQ credit card machine and want to
> take
>> >> > orders
>> >> >
>> >> >> > via the net and the shopping cart of Fusion.
>> >> >
>> >> >> >
>> >> >
>> >> >> > Just confused over how to do this. I understand adding the
> products
>> > to
>> >> > the
>> >> >
>> >> >> > cart, but how do I get card details sent to me securely so I can
>> >> >> > process
>> >> >
>> >> >> > them on the machine?
>> >> >
>> >> >> >
>> >> >
>> >> >> > The help section with the software leaves a lot to be desired, so
>> >> >> > any
>> >> >
>> >> >> > pointers would be greatefully recieved.
>> >> >
>> >> >> >
>> >> >
>> >> >> > Cheers
>> >> >
>> >> >> >
>> >> >
>> >> >> > bob
>> >> >
>> >> >> >
>> >> >
>> >> >> >
>> >> >
>> >> >>
>> >> >
>> >> >>
>> >> >
>> >> > "Chris (NetObjects)" <cdolan@netobjects.com> wrote in message
>> >> > news:dsv55m$k6m3@news01.netobjects.com...
>> >> >> Hi Bob
>> >> >>
>> >> >> Shop Pro is one of the Shopping Cart Store Engine options in
>> >> >> NetObjects
>> >> >> Fusion in either PHP or Perl versions. This solution could be what
> you
>> >> > need,
>> >> >> as you are going to process cards offline.
>> >> >>
>> >> >> C:\Program Files\NetObjects\NetObjects Fusion 9.0\NetObjects
>> >> >>
>> > System\FSI\Ecomm\lib\store\engine\Shoppro.PHP\shop pro_readme_php_en.html
>> >> >>
>> >> >> You probably have the file above installed on your Fusion 9
>> > installation,
>> >> > in
>> >> >> that document, (linked to from the E.Commerce Tool) it explains
>> >> >> alot
>> > more
>> >> >> about how to setup and configure Shop Pro.
>> >> >>
>> >> >> Chris
>> >> >> NetObjects
>> >> >>
>> >> >>
>> >> >> "Bob" <bobcartwright@btconnect.com> wrote in message
>> >> >> news:dsuva5$k3o1@news01.netobjects.com...
>> >> >> > Just taken delivery of V9, but still using V8 to produce
>> >> >> > websites.
>> >> >> >
>> >> >> > I have a small shop with a PDQ credit card machine and want to
> take
>> >> > orders
>> >> >> > via the net and the shopping cart of Fusion.
>> >> >> >
>> >> >> > Just confused over how to do this. I understand adding the
> products
>> > to
>> >> > the
>> >> >> > cart, but how do I get card details sent to me securely so I can
>> >> >> > process
>> >> >> > them on the machine?
>> >> >> >
>> >> >> > The help section with the software leaves a lot to be desired, so
>> >> >> > any
>> >> >> > pointers would be greatefully recieved.
>> >> >> >
>> >> >> > Cheers
>> >> >> >
>> >> >> > bob
>> >> >> >
>> >> >> >
>> >> >>
>> >> >>
>> >> >
>> >> >
>> >>
>> >>
>> >
>> >
>>
>>
>
>
-
Re: E-Commerce confusion
Okay Chuck, it sounds like this would be slightly beyond my understanding of
Fusion.
What skills would I ask for and what type of person should I be looking for
to help me through this? Database progammer, 'C' etc?
Also can you supply the website address of one of these sites you mention. I
would like to see what you've done.
Cheers
Bob
"Chuck «BeyondFusion»" <supportno@spambeyondfusion.com> wrote in message
news:dttdcm$rui1@news01.netobjects.com...
> Bob,
>
> Yes, you can have a single database supporting multiple sites.
>
> I've done just that using Fusion/PHP/MySQL for (currently) four different
> sites.
>
> Products appear on some or all of the sites. That's an option in the
> database.
>
> I do this with all custom code I write. I'd hate to try and do the same
> thing using the built-in DB component.
>
> First the database is designed and then snippets of PHP code or includes
to
> external PHP files are inserted using the code insertion points in Fusion.
>
> Been dong it since Fusion MX, eons ago.
>
> --
> Chuck Joslin - Team NetObjects
> BeyondFusion.com - Your Fusion Community
> www.beyondfusion.com
>
> Fusion Wish List - www.beyondfusion.com/wish
> Register domain names at www.awavedomains.com
>
> "Bob" <bobcartwright@btconnect.com> wrote in message
> news:dtsnvs$rpg3@news01.netobjects.com...
> > Right Chuck, I'm starting to get the idea, thanks for that.
> >
> > What I would like to do is use database integration and have one master
> > database which has fields containing, product info, prices, images etc
and
> > have that linked to several different sites which select out of the
> > database
> > the products relevant to them.
> >
> > Is this possible in Fusion? I am just starting to try and get this work
> > and
> > wondering if it is beyond the program?
> >
> > Thanks for you help, just looking at Mals now. Interesting.
> >
> > Cheers
> >
> > Bob
> >
> >
> > "Chuck «BeyondFusion»" <supportno@spambeyondfusion.com> wrote in message
> > news:dsvi3o$kbm4@news01.netobjects.com...
> >> Bob,
> >>
> >> CC info is collected on the shopping cart side.
> >>
> >> The e-comm component is used to create a catalog. Then you connect it
to
> >> a
> >> cart engine. Shop Pro is one...but you would need to install it on a
> > secure
> >> server.
> >>
> >> Look into using Mal's e-commerce as an alternative. www.mals-e.com
> >>
> >> Mal's is one of the "engines" supported out of the box in Fusion. Mal's
> >> provides a secure server, so you don't have to worry about that part.
> >>
> >> When a sale occurs, you're notified via email and you then login to
Mal's
> > to
> >> collect the payment info.
> >>
> >> --
> >> Chuck Joslin - Team NetObjects
> >> BeyondFusion.com - Your Fusion Community
> >> www.beyondfusion.com
> >>
> >> Fusion Wish List - www.beyondfusion.com/wish
> >> Register domain names at www.awavedomains.com
> >>
> >> "Bob" <bobcartwright@btconnect.com> wrote in message
> >> news:dsvhak$kan1@news01.netobjects.com...
> >> > Thanks Chris,
> >> >
> >> > I've just read it, but I'm still confused over the next stage, after
> > I've
> >> > added the the product, where or how do I configure the enter credit
> >> > card
> >> > payment section?
> >> >
> >> > I gather the email with go to the email address I set up initially,
> >> > does
> >> > this include card data? If so how can I make it secure?
> >> >
> >> > Is there no where I can go for this as a how to? Surely it is one of
> >> > the
> >> > main objectives of such good software to make this easy?
> >> >
> >> > Sorry, perhaps I'm being a bit dim here...
> >> >
> >> > Cheers
> >> >
> >> > Bob
> >> >
> >> > "Chris (NetObjects)" <cdolan@netobjects.com> wrote in message
> >> > news:<dsv55m$k6m3@news01.netobjects.com>...
> >> >
> >> >> Hi Bob
> >> >
> >> >>
> >> >
> >> >> Shop Pro is one of the Shopping Cart Store Engine options in
> >> >> NetObjects
> >> >
> >> >> Fusion in either PHP or Perl versions. This solution could be what y
ou
> >> > need,
> >> >
> >> >> as you are going to process cards offline.
> >> >
> >> >>
> >> >
> >> >> C:\Program Files\NetObjects\NetObjects Fusion 9.0\NetObjects
> >> >
> >> >>
> > System\FSI\Ecomm\lib\store\engine\Shoppro.PHP\shop pro_readme_php_en.html
> >> >
> >> >>
> >> >
> >> >> You probably have the file above installed on your Fusion 9
> > installation,
> >> > in
> >> >
> >> >> that document, (linked to from the E.Commerce Tool) it explains alot
> > more
> >> >
> >> >> about how to setup and configure Shop Pro.
> >> >
> >> >>
> >> >
> >> >> Chris
> >> >
> >> >> NetObjects
> >> >
> >> >>
> >> >
> >> >>
> >> >
> >> >> "Bob" <bobcartwright@btconnect.com> wrote in message
> >> >
> >> >> news:dsuva5$k3o1@news01.netobjects.com...
> >> >
> >> >> > Just taken delivery of V9, but still using V8 to produce websites.
> >> >
> >> >> >
> >> >
> >> >> > I have a small shop with a PDQ credit card machine and want to
take
> >> > orders
> >> >
> >> >> > via the net and the shopping cart of Fusion.
> >> >
> >> >> >
> >> >
> >> >> > Just confused over how to do this. I understand adding the
products
> > to
> >> > the
> >> >
> >> >> > cart, but how do I get card details sent to me securely so I can
> >> >> > process
> >> >
> >> >> > them on the machine?
> >> >
> >> >> >
> >> >
> >> >> > The help section with the software leaves a lot to be desired, so
> >> >> > any
> >> >
> >> >> > pointers would be greatefully recieved.
> >> >
> >> >> >
> >> >
> >> >> > Cheers
> >> >
> >> >> >
> >> >
> >> >> > bob
> >> >
> >> >> >
> >> >
> >> >> >
> >> >
> >> >>
> >> >
> >> >>
> >> >
> >> > "Chris (NetObjects)" <cdolan@netobjects.com> wrote in message
> >> > news:dsv55m$k6m3@news01.netobjects.com...
> >> >> Hi Bob
> >> >>
> >> >> Shop Pro is one of the Shopping Cart Store Engine options in
> >> >> NetObjects
> >> >> Fusion in either PHP or Perl versions. This solution could be what
you
> >> > need,
> >> >> as you are going to process cards offline.
> >> >>
> >> >> C:\Program Files\NetObjects\NetObjects Fusion 9.0\NetObjects
> >> >>
> > System\FSI\Ecomm\lib\store\engine\Shoppro.PHP\shop pro_readme_php_en.html
> >> >>
> >> >> You probably have the file above installed on your Fusion 9
> > installation,
> >> > in
> >> >> that document, (linked to from the E.Commerce Tool) it explains alot
> > more
> >> >> about how to setup and configure Shop Pro.
> >> >>
> >> >> Chris
> >> >> NetObjects
> >> >>
> >> >>
> >> >> "Bob" <bobcartwright@btconnect.com> wrote in message
> >> >> news:dsuva5$k3o1@news01.netobjects.com...
> >> >> > Just taken delivery of V9, but still using V8 to produce websites.
> >> >> >
> >> >> > I have a small shop with a PDQ credit card machine and want to
take
> >> > orders
> >> >> > via the net and the shopping cart of Fusion.
> >> >> >
> >> >> > Just confused over how to do this. I understand adding the
products
> > to
> >> > the
> >> >> > cart, but how do I get card details sent to me securely so I can
> >> >> > process
> >> >> > them on the machine?
> >> >> >
> >> >> > The help section with the software leaves a lot to be desired, so
> >> >> > any
> >> >> > pointers would be greatefully recieved.
> >> >> >
> >> >> > Cheers
> >> >> >
> >> >> > bob
> >> >> >
> >> >> >
> >> >>
> >> >>
> >> >
> >> >
> >>
> >>
> >
> >
>
>
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules