Page 1 of 2 12 LastLast
Results 1 to 10 of 20

Thread: Update # 2

  1. #1
    JJ
    Guest

    Default Update # 2

    Is anyone using the "latest" Update 2 (released 8 March 2006) for NOF 9 yet?

    Any issues discovered so far? I'm very keen for the fixes but I'm a bit
    wary after the last "update".

    JJ



  2. #2
    Ken Friedman
    Guest

    Default Re: Update # 2

    Corel withdrew it because it had too many bugs. I have no idea when they
    will re-release it again.

    --
    Ken Friedman
    Author

    "JJ" <jamesjimmy3000@yahoo.com> wrote in message
    news:duqrsj$63h3@news01.netobjects.com...
    > Is anyone using the "latest" Update 2 (released 8 March 2006) for NOF 9
    > yet?
    >
    > Any issues discovered so far? I'm very keen for the fixes but I'm a bit
    > wary after the last "update".
    >
    > JJ
    >




  3. #3
    Ken Friedman
    Guest

    Default Oops!!

    Sorry about my previous post. I should checked NOF's web site for the new
    update. I am also waiting for user feedback before I'll download and install
    it.

    --
    Ken Friedman
    Author

    "Ken Friedman" <kifried@pacbelll.net> wrote in message
    news:dusldk$6j97@news01.netobjects.com...
    > Corel withdrew it because it had too many bugs. I have no idea when they
    > will re-release it again.
    >
    > --
    > Ken Friedman
    > Author
    >
    > "JJ" <jamesjimmy3000@yahoo.com> wrote in message
    > news:duqrsj$63h3@news01.netobjects.com...
    >> Is anyone using the "latest" Update 2 (released 8 March 2006) for NOF 9
    >> yet?
    >>
    >> Any issues discovered so far? I'm very keen for the fixes but I'm a bit
    >> wary after the last "update".
    >>
    >> JJ
    >>

    >
    >




  4. #4
    Chuck «BeyondFusion»
    Guest

    Default Re: Oops!!

    Ken,

    Build 5019 works as advertised.

    This one doesn't break anything that was previously working. (-:

    --
    Chuck Joslin - Team NetObjects
    BeyondFusion.com - Your Fusion Community
    www.beyondfusion.com

    Fusion Wish List - www.beyondfusion.com/wish
    Register domain names at www.awavedomains.com

    "Ken Friedman" <kifried@pacbelll.net> wrote in message
    news:dusllm$6k21@news01.netobjects.com...
    > Sorry about my previous post. I should checked NOF's web site for the new
    > update. I am also waiting for user feedback before I'll download and
    > install it.
    >
    > --
    > Ken Friedman
    > Author
    >
    > "Ken Friedman" <kifried@pacbelll.net> wrote in message
    > news:dusldk$6j97@news01.netobjects.com...
    >> Corel withdrew it because it had too many bugs. I have no idea when they
    >> will re-release it again.
    >>
    >> --
    >> Ken Friedman
    >> Author
    >>
    >> "JJ" <jamesjimmy3000@yahoo.com> wrote in message
    >> news:duqrsj$63h3@news01.netobjects.com...
    >>> Is anyone using the "latest" Update 2 (released 8 March 2006) for NOF 9
    >>> yet?
    >>>
    >>> Any issues discovered so far? I'm very keen for the fixes but I'm a bit
    >>> wary after the last "update".
    >>>
    >>> JJ
    >>>

    >>
    >>

    >
    >




  5. #5
    Marcel
    Guest

    Default Re: Update #2

    Hi Chuck,

    when will there be other language editions of Update#2? And is there an
    agenda of changes for the updated documentation? How do I know which
    parts are new? Thanks for your answer!

    Marcel

  6. #6
    Ken Friedman
    Guest

    Default Update #2

    Chuck,

    Thanks for the reassurances. I did download both the updates to the code and
    documentation and will update NOF 9 after I see more user experiences posted
    on this newsgroup.

    --
    Ken Friedman
    Author

    "Chuck «BeyondFusion»" <supportno@spambeyondfusion.com> wrote in message
    news:duslvq$6k22@news01.netobjects.com...
    > Ken,
    >
    > Build 5019 works as advertised.
    >
    > This one doesn't break anything that was previously working. (-:
    >
    > --
    > Chuck Joslin - Team NetObjects
    > BeyondFusion.com - Your Fusion Community
    > www.beyondfusion.com
    >
    > Fusion Wish List - www.beyondfusion.com/wish
    > Register domain names at www.awavedomains.com
    >
    > "Ken Friedman" <kifried@pacbelll.net> wrote in message
    > news:dusllm$6k21@news01.netobjects.com...
    >> Sorry about my previous post. I should checked NOF's web site for the new
    >> update. I am also waiting for user feedback before I'll download and
    >> install it.
    >>
    >> --
    >> Ken Friedman
    >> Author
    >>
    >> "Ken Friedman" <kifried@pacbelll.net> wrote in message
    >> news:dusldk$6j97@news01.netobjects.com...
    >>> Corel withdrew it because it had too many bugs. I have no idea when they
    >>> will re-release it again.
    >>>
    >>> --
    >>> Ken Friedman
    >>> Author
    >>>
    >>> "JJ" <jamesjimmy3000@yahoo.com> wrote in message
    >>> news:duqrsj$63h3@news01.netobjects.com...
    >>>> Is anyone using the "latest" Update 2 (released 8 March 2006) for NOF 9
    >>>> yet?
    >>>>
    >>>> Any issues discovered so far? I'm very keen for the fixes but I'm a
    >>>> bit wary after the last "update".
    >>>>
    >>>> JJ
    >>>>
    >>>
    >>>

    >>
    >>

    >
    >




  7. #7
    Chuck «BeyondFusion»
    Guest

    Default Re: Update #2

    Ken,

    As you wish..... but I've been using it a lot longer than you've had access
    to it. (-;

    --
    Chuck Joslin - Team NetObjects
    BeyondFusion.com - Your Fusion Community
    www.beyondfusion.com

    Fusion Wish List - www.beyondfusion.com/wish
    Register domain names at www.awavedomains.com

    "Ken Friedman" <kifried@pacbelll.net> wrote in message
    news:dut4ou$7e82@news01.netobjects.com...
    > Chuck,
    >
    > Thanks for the reassurances. I did download both the updates to the code
    > and documentation and will update NOF 9 after I see more user experiences
    > posted on this newsgroup.
    >
    > --
    > Ken Friedman
    > Author
    >
    > "Chuck «BeyondFusion»" <supportno@spambeyondfusion.com> wrote in message
    > news:duslvq$6k22@news01.netobjects.com...
    >> Ken,
    >>
    >> Build 5019 works as advertised.
    >>
    >> This one doesn't break anything that was previously working. (-:
    >>
    >> --
    >> Chuck Joslin - Team NetObjects
    >> BeyondFusion.com - Your Fusion Community
    >> www.beyondfusion.com
    >>
    >> Fusion Wish List - www.beyondfusion.com/wish
    >> Register domain names at www.awavedomains.com
    >>
    >> "Ken Friedman" <kifried@pacbelll.net> wrote in message
    >> news:dusllm$6k21@news01.netobjects.com...
    >>> Sorry about my previous post. I should checked NOF's web site for the
    >>> new update. I am also waiting for user feedback before I'll download and
    >>> install it.
    >>>
    >>> --
    >>> Ken Friedman
    >>> Author
    >>>
    >>> "Ken Friedman" <kifried@pacbelll.net> wrote in message
    >>> news:dusldk$6j97@news01.netobjects.com...
    >>>> Corel withdrew it because it had too many bugs. I have no idea when
    >>>> they will re-release it again.
    >>>>
    >>>> --
    >>>> Ken Friedman
    >>>> Author
    >>>>
    >>>> "JJ" <jamesjimmy3000@yahoo.com> wrote in message
    >>>> news:duqrsj$63h3@news01.netobjects.com...
    >>>>> Is anyone using the "latest" Update 2 (released 8 March 2006) for NOF
    >>>>> 9 yet?
    >>>>>
    >>>>> Any issues discovered so far? I'm very keen for the fixes but I'm a
    >>>>> bit wary after the last "update".
    >>>>>
    >>>>> JJ
    >>>>>
    >>>>
    >>>>
    >>>
    >>>

    >>
    >>

    >
    >




  8. #8
    Chuck «BeyondFusion»
    Guest

    Default Re: Update #2

    Jack,

    Update 2 includes Update 1. So there's no need to install Update 1 prior to
    installing Update 2 if you haven't already done so.

    --
    Chuck Joslin - Team NetObjects
    BeyondFusion.com - Your Fusion Community
    www.beyondfusion.com

    Fusion Wish List - www.beyondfusion.com/wish
    Register domain names at www.awavedomains.com

    "Jack B" <jslimp01@earthlink.net> wrote in message
    news:dutlnq$7ir2@news01.netobjects.com...
    >I assume only update # 2 is needed if you haven't already installed update
    >#
    > 1?
    >
    > Jack
    >
    >
    >
    > "Chuck «BeyondFusion»" <supportno@spambeyondfusion.com> wrote in message
    > news:dut5h1$7fr1@news01.netobjects.com...
    > Ken,
    >
    > As you wish..... but I've been using it a lot longer than you've had
    > access
    > to it. (-;
    >
    > --
    > Chuck Joslin - Team NetObjects
    > BeyondFusion.com - Your Fusion Community
    > www.beyondfusion.com
    >
    > Fusion Wish List - www.beyondfusion.com/wish
    > Register domain names at www.awavedomains.com
    >
    > "Ken Friedman" <kifried@pacbelll.net> wrote in message
    > news:dut4ou$7e82@news01.netobjects.com...
    >> Chuck,
    >>
    >> Thanks for the reassurances. I did download both the updates to the code
    >> and documentation and will update NOF 9 after I see more user experiences
    >> posted on this newsgroup.
    >>
    >> --
    >> Ken Friedman
    >> Author
    >>
    >> "Chuck «BeyondFusion»" <supportno@spambeyondfusion.com> wrote in message
    >> news:duslvq$6k22@news01.netobjects.com...
    >>> Ken,
    >>>
    >>> Build 5019 works as advertised.
    >>>
    >>> This one doesn't break anything that was previously working. (-:
    >>>
    >>> --
    >>> Chuck Joslin - Team NetObjects
    >>> BeyondFusion.com - Your Fusion Community
    >>> www.beyondfusion.com
    >>>
    >>> Fusion Wish List - www.beyondfusion.com/wish
    >>> Register domain names at www.awavedomains.com
    >>>
    >>> "Ken Friedman" <kifried@pacbelll.net> wrote in message
    >>> news:dusllm$6k21@news01.netobjects.com...
    >>>> Sorry about my previous post. I should checked NOF's web site for the
    >>>> new update. I am also waiting for user feedback before I'll download
    >>>> and
    >>>> install it.
    >>>>
    >>>> --
    >>>> Ken Friedman
    >>>> Author
    >>>>
    >>>> "Ken Friedman" <kifried@pacbelll.net> wrote in message
    >>>> news:dusldk$6j97@news01.netobjects.com...
    >>>>> Corel withdrew it because it had too many bugs. I have no idea when
    >>>>> they will re-release it again.
    >>>>>
    >>>>> --
    >>>>> Ken Friedman
    >>>>> Author
    >>>>>
    >>>>> "JJ" <jamesjimmy3000@yahoo.com> wrote in message
    >>>>> news:duqrsj$63h3@news01.netobjects.com...
    >>>>>> Is anyone using the "latest" Update 2 (released 8 March 2006) for NOF
    >>>>>> 9 yet?
    >>>>>>
    >>>>>> Any issues discovered so far? I'm very keen for the fixes but I'm a
    >>>>>> bit wary after the last "update".
    >>>>>>
    >>>>>> JJ
    >>>>>>
    >>>>>
    >>>>>
    >>>>
    >>>>
    >>>
    >>>

    >>
    >>

    >
    >
    >




  9. #9
    JJ
    Guest

    Default Re: Update #2

    No, you still need to install Update 2 as well.

    "Jack B" <jslimp01@earthlink.net> wrote in message
    news:dutlnq$7ir2@news01.netobjects.com...
    >I assume only update # 2 is needed if you haven't already installed update
    >#
    > 1?
    >
    > Jack
    >
    >
    >
    > "Chuck «BeyondFusion»" <supportno@spambeyondfusion.com> wrote in message
    > news:dut5h1$7fr1@news01.netobjects.com...
    > Ken,
    >
    > As you wish..... but I've been using it a lot longer than you've had
    > access
    > to it. (-;
    >
    > --
    > Chuck Joslin - Team NetObjects
    > BeyondFusion.com - Your Fusion Community
    > www.beyondfusion.com
    >
    > Fusion Wish List - www.beyondfusion.com/wish
    > Register domain names at www.awavedomains.com
    >
    > "Ken Friedman" <kifried@pacbelll.net> wrote in message
    > news:dut4ou$7e82@news01.netobjects.com...
    >> Chuck,
    >>
    >> Thanks for the reassurances. I did download both the updates to the code
    >> and documentation and will update NOF 9 after I see more user experiences
    >> posted on this newsgroup.
    >>
    >> --
    >> Ken Friedman
    >> Author
    >>
    >> "Chuck «BeyondFusion»" <supportno@spambeyondfusion.com> wrote in message
    >> news:duslvq$6k22@news01.netobjects.com...
    >>> Ken,
    >>>
    >>> Build 5019 works as advertised.
    >>>
    >>> This one doesn't break anything that was previously working. (-:
    >>>
    >>> --
    >>> Chuck Joslin - Team NetObjects
    >>> BeyondFusion.com - Your Fusion Community
    >>> www.beyondfusion.com
    >>>
    >>> Fusion Wish List - www.beyondfusion.com/wish
    >>> Register domain names at www.awavedomains.com
    >>>
    >>> "Ken Friedman" <kifried@pacbelll.net> wrote in message
    >>> news:dusllm$6k21@news01.netobjects.com...
    >>>> Sorry about my previous post. I should checked NOF's web site for the
    >>>> new update. I am also waiting for user feedback before I'll download
    >>>> and
    >>>> install it.
    >>>>
    >>>> --
    >>>> Ken Friedman
    >>>> Author
    >>>>
    >>>> "Ken Friedman" <kifried@pacbelll.net> wrote in message
    >>>> news:dusldk$6j97@news01.netobjects.com...
    >>>>> Corel withdrew it because it had too many bugs. I have no idea when
    >>>>> they will re-release it again.
    >>>>>
    >>>>> --
    >>>>> Ken Friedman
    >>>>> Author
    >>>>>
    >>>>> "JJ" <jamesjimmy3000@yahoo.com> wrote in message
    >>>>> news:duqrsj$63h3@news01.netobjects.com...
    >>>>>> Is anyone using the "latest" Update 2 (released 8 March 2006) for NOF
    >>>>>> 9 yet?
    >>>>>>
    >>>>>> Any issues discovered so far? I'm very keen for the fixes but I'm a
    >>>>>> bit wary after the last "update".
    >>>>>>
    >>>>>> JJ
    >>>>>>
    >>>>>
    >>>>>
    >>>>
    >>>>
    >>>
    >>>

    >>
    >>

    >
    >
    >




  10. #10
    Jack B
    Guest

    Default Re: Update #2

    I assume only update # 2 is needed if you haven't already installed update #
    1?

    Jack



    "Chuck «BeyondFusion»" <supportno@spambeyondfusion.com> wrote in message
    news:dut5h1$7fr1@news01.netobjects.com...
    Ken,

    As you wish..... but I've been using it a lot longer than you've had access
    to it. (-;

    --
    Chuck Joslin - Team NetObjects
    BeyondFusion.com - Your Fusion Community
    www.beyondfusion.com

    Fusion Wish List - www.beyondfusion.com/wish
    Register domain names at www.awavedomains.com

    "Ken Friedman" <kifried@pacbelll.net> wrote in message
    news:dut4ou$7e82@news01.netobjects.com...
    > Chuck,
    >
    > Thanks for the reassurances. I did download both the updates to the code
    > and documentation and will update NOF 9 after I see more user experiences
    > posted on this newsgroup.
    >
    > --
    > Ken Friedman
    > Author
    >
    > "Chuck «BeyondFusion»" <supportno@spambeyondfusion.com> wrote in message
    > news:duslvq$6k22@news01.netobjects.com...
    >> Ken,
    >>
    >> Build 5019 works as advertised.
    >>
    >> This one doesn't break anything that was previously working. (-:
    >>
    >> --
    >> Chuck Joslin - Team NetObjects
    >> BeyondFusion.com - Your Fusion Community
    >> www.beyondfusion.com
    >>
    >> Fusion Wish List - www.beyondfusion.com/wish
    >> Register domain names at www.awavedomains.com
    >>
    >> "Ken Friedman" <kifried@pacbelll.net> wrote in message
    >> news:dusllm$6k21@news01.netobjects.com...
    >>> Sorry about my previous post. I should checked NOF's web site for the
    >>> new update. I am also waiting for user feedback before I'll download and
    >>> install it.
    >>>
    >>> --
    >>> Ken Friedman
    >>> Author
    >>>
    >>> "Ken Friedman" <kifried@pacbelll.net> wrote in message
    >>> news:dusldk$6j97@news01.netobjects.com...
    >>>> Corel withdrew it because it had too many bugs. I have no idea when
    >>>> they will re-release it again.
    >>>>
    >>>> --
    >>>> Ken Friedman
    >>>> Author
    >>>>
    >>>> "JJ" <jamesjimmy3000@yahoo.com> wrote in message
    >>>> news:duqrsj$63h3@news01.netobjects.com...
    >>>>> Is anyone using the "latest" Update 2 (released 8 March 2006) for NOF
    >>>>> 9 yet?
    >>>>>
    >>>>> Any issues discovered so far? I'm very keen for the fixes but I'm a
    >>>>> bit wary after the last "update".
    >>>>>
    >>>>> JJ
    >>>>>
    >>>>
    >>>>
    >>>
    >>>

    >>
    >>

    >
    >





Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •