-
Re: Update # 2
I did the same (installation) and it seems o.k.
And, for the record... I absolutely agree with you about the release
numbering.
Regards
Phill
Maintenance Management Software from
http://www.pmsoftware.co.uk
"Ritch" <ritchieatamforddotcodotuk> wrote in message
news:duvlm3$81i1@news01.netobjects.com...
> So right Murray. This latest release should have been Release #3 with a
> note that release #2 had been withdrawn. The NOF site should also have had
> a release note explaining that this latest release can or cannot be
> installed on top of NOF 9 which has the withdrawn Update #2. I hope that
> makes sense.
>
> For the record ... I installed it on top of NOF 9 with the withdrawn #2 in
> absence of a note saying otherwise. Fingers crossed.
>
> Ritch
>
> "Murray Eisenberg" <murray@math.umass.edu> wrote in message
> news:duvj53$80n1@news01.netobjects.com...
>> This is just a perpetuation of a totally perverse and stupid naming
>> convention about which, at least this one user, has complained for some
>> time.
>>
>> There is utterly NO GOOD REASON to use the same name for two different
>> things (even if one distinguishes the two through some much more obscure
>> build number or build date).
>>
>>
>> Widman wrote:
>>> This update has exactly the same name as the previous Update 2, even
>>> though it is supposed to be imporved. So I assume you already
>>> downloaded the first one. It is similar when you just go to the site
>>> and download it. If you save to the same place as where you had the
>>> previous file, it will ask if you want to replace it.
>>> Richard Widman
>>> www.widman.biz
>>> Bolivia
>>>
>>> On Sat, Mar 11 2006 1:23 pm, "Tony Williams" <tw@invalid.com> said:
>>>> Why when I clicked on "Check for Updates" when I opened NOF9 did I get
>>>> a message there are no updates available when #2 was there???
>>>> Tony
>>>> "JJ" <jamesjimmy3000@yahoo.com> wrote in message
>>>> news:duqrsj$63h3@news01.netobjects.com...
>>>>> Is anyone using the "latest" Update 2 (released 8 March 2006) for NOF
>>>>> 9 yet?
>>>>>
>>>>> Any issues discovered so far? I'm very keen for the fixes but I'm a
>>>>> bit wary after the last "update".
>>>>>
>>>>> JJ
>>>>>
>>>>
>>>
>>>
>>
>> --
>> Murray Eisenberg murray@math.umass.edu
>> Mathematics & Statistics Dept.
>> Lederle Graduate Research Tower phone 413 549-1020 (H)
>> University of Massachusetts 413 545-2859 (W)
>> 710 North Pleasant Street fax 413 545-1801
>> Amherst, MA 01003-9305
>
>
-
Re: Update # 2
So right Murray. This latest release should have been Release #3 with a note
that release #2 had been withdrawn. The NOF site should also have had a
release note explaining that this latest release can or cannot be installed
on top of NOF 9 which has the withdrawn Update #2. I hope that makes sense.
For the record ... I installed it on top of NOF 9 with the withdrawn #2 in
absence of a note saying otherwise. Fingers crossed.
Ritch
"Murray Eisenberg" <murray@math.umass.edu> wrote in message
news:duvj53$80n1@news01.netobjects.com...
> This is just a perpetuation of a totally perverse and stupid naming
> convention about which, at least this one user, has complained for some
> time.
>
> There is utterly NO GOOD REASON to use the same name for two different
> things (even if one distinguishes the two through some much more obscure
> build number or build date).
>
>
> Widman wrote:
>> This update has exactly the same name as the previous Update 2, even
>> though it is supposed to be imporved. So I assume you already downloaded
>> the first one. It is similar when you just go to the site and download
>> it. If you save to the same place as where you had the previous file, it
>> will ask if you want to replace it.
>> Richard Widman
>> www.widman.biz
>> Bolivia
>>
>> On Sat, Mar 11 2006 1:23 pm, "Tony Williams" <tw@invalid.com> said:
>>> Why when I clicked on "Check for Updates" when I opened NOF9 did I get a
>>> message there are no updates available when #2 was there???
>>> Tony
>>> "JJ" <jamesjimmy3000@yahoo.com> wrote in message
>>> news:duqrsj$63h3@news01.netobjects.com...
>>>> Is anyone using the "latest" Update 2 (released 8 March 2006) for NOF 9
>>>> yet?
>>>>
>>>> Any issues discovered so far? I'm very keen for the fixes but I'm a
>>>> bit wary after the last "update".
>>>>
>>>> JJ
>>>>
>>>
>>
>>
>
> --
> Murray Eisenberg murray@math.umass.edu
> Mathematics & Statistics Dept.
> Lederle Graduate Research Tower phone 413 549-1020 (H)
> University of Massachusetts 413 545-2859 (W)
> 710 North Pleasant Street fax 413 545-1801
> Amherst, MA 01003-9305
-
Re: Update # 2
This is just a perpetuation of a totally perverse and stupid naming
convention about which, at least this one user, has complained for some
time.
There is utterly NO GOOD REASON to use the same name for two different
things (even if one distinguishes the two through some much more obscure
build number or build date).
Widman wrote:
> This update has exactly the same name as the previous Update 2, even though it
> is supposed to be imporved. So I assume you already downloaded the first one.
> It is similar when you just go to the site and download it. If you save to the
> same place as where you had the previous file, it will ask if you want to
> replace it.
> Richard Widman
> www.widman.biz
> Bolivia
>
> On Sat, Mar 11 2006 1:23 pm, "Tony Williams" <tw@invalid.com> said:
>> Why when I clicked on "Check for Updates" when I opened NOF9 did I get a
>> message there are no updates available when #2 was there???
>> Tony
>> "JJ" <jamesjimmy3000@yahoo.com> wrote in message
>> news:duqrsj$63h3@news01.netobjects.com...
>>> Is anyone using the "latest" Update 2 (released 8 March 2006) for NOF 9
>>> yet?
>>>
>>> Any issues discovered so far? I'm very keen for the fixes but I'm a bit
>>> wary after the last "update".
>>>
>>> JJ
>>>
>>
>
>
--
Murray Eisenberg murray@math.umass.edu
Mathematics & Statistics Dept.
Lederle Graduate Research Tower phone 413 549-1020 (H)
University of Massachusetts 413 545-2859 (W)
710 North Pleasant Street fax 413 545-1801
Amherst, MA 01003-9305
-
Installed successfully and seems OK
I did install both the program and documentation updates and all seem
working properly. Whew!!!
--
Ken Friedman
Author
"Ken Friedman" <kifried@pacbelll.net> wrote in message
news:dut4ou$7e82@news01.netobjects.com...
> Chuck,
>
> Thanks for the reassurances. I did download both the updates to the code
> and documentation and will update NOF 9 after I see more user experiences
> posted on this newsgroup.
>
> --
> Ken Friedman
> Author
>
> "Chuck «BeyondFusion»" <supportno@spambeyondfusion.com> wrote in message
> news:duslvq$6k22@news01.netobjects.com...
>> Ken,
>>
>> Build 5019 works as advertised.
>>
>> This one doesn't break anything that was previously working. (-:
>>
>> --
>> Chuck Joslin - Team NetObjects
>> BeyondFusion.com - Your Fusion Community
>> www.beyondfusion.com
>>
>> Fusion Wish List - www.beyondfusion.com/wish
>> Register domain names at www.awavedomains.com
>>
>> "Ken Friedman" <kifried@pacbelll.net> wrote in message
>> news:dusllm$6k21@news01.netobjects.com...
>>> Sorry about my previous post. I should checked NOF's web site for the
>>> new update. I am also waiting for user feedback before I'll download and
>>> install it.
>>>
>>> --
>>> Ken Friedman
>>> Author
>>>
>>> "Ken Friedman" <kifried@pacbelll.net> wrote in message
>>> news:dusldk$6j97@news01.netobjects.com...
>>>> Corel withdrew it because it had too many bugs. I have no idea when
>>>> they will re-release it again.
>>>>
>>>> --
>>>> Ken Friedman
>>>> Author
>>>>
>>>> "JJ" <jamesjimmy3000@yahoo.com> wrote in message
>>>> news:duqrsj$63h3@news01.netobjects.com...
>>>>> Is anyone using the "latest" Update 2 (released 8 March 2006) for NOF
>>>>> 9 yet?
>>>>>
>>>>> Any issues discovered so far? I'm very keen for the fixes but I'm a
>>>>> bit wary after the last "update".
>>>>>
>>>>> JJ
>>>>>
>>>>
>>>>
>>>
>>>
>>
>>
>
>
-
Re: Update # 2
This update has exactly the same name as the previous Update 2, even though it
is supposed to be imporved. So I assume you already downloaded the first one.
It is similar when you just go to the site and download it. If you save to the
same place as where you had the previous file, it will ask if you want to
replace it.
Richard Widman
www.widman.biz
Bolivia
On Sat, Mar 11 2006 1:23 pm, "Tony Williams" <tw@invalid.com> said:
>Why when I clicked on "Check for Updates" when I opened NOF9 did I get a
>message there are no updates available when #2 was there???
>Tony
>"JJ" <jamesjimmy3000@yahoo.com> wrote in message
>news:duqrsj$63h3@news01.netobjects.com...
>> Is anyone using the "latest" Update 2 (released 8 March 2006) for NOF 9
>> yet?
>>
>> Any issues discovered so far? I'm very keen for the fixes but I'm a bit
>> wary after the last "update".
>>
>> JJ
>>
>
>
-
Re: Update # 2
Why when I clicked on "Check for Updates" when I opened NOF9 did I get a
message there are no updates available when #2 was there???
Tony
"JJ" <jamesjimmy3000@yahoo.com> wrote in message
news:duqrsj$63h3@news01.netobjects.com...
> Is anyone using the "latest" Update 2 (released 8 March 2006) for NOF 9
> yet?
>
> Any issues discovered so far? I'm very keen for the fixes but I'm a bit
> wary after the last "update".
>
> JJ
>
-
Chuck «BeyondFusion»
Guest
Re: Update # 2
Tony,
WSP generally rolls out an update in stages.
First they "soft launch". They make the update available form the NetObjects
website, but don't announce it.
Then they make a public announcement here in the newsgroups and possibly
elsewhere.
Then, at some point, they make it available via AutoUpdate in the program.
I imagine this is to spread the load on their server out over time.
To get the update now, manually download it from:
www.netobjects.com/html/productupdatenof9.html
After downloading, double-click on the exe file to install the update,
making sure you allow all install windows to close on their own.
--
Chuck Joslin - Team NetObjects
BeyondFusion.com - Your Fusion Community
www.beyondfusion.com
Fusion Wish List - www.beyondfusion.com/wish
Register domain names at www.awavedomains.com
"Tony Williams" <tw@invalid.com> wrote in message
news:duv13a$7sg1@news01.netobjects.com...
> Why when I clicked on "Check for Updates" when I opened NOF9 did I get a
> message there are no updates available when #2 was there???
> Tony
> "JJ" <jamesjimmy3000@yahoo.com> wrote in message
> news:duqrsj$63h3@news01.netobjects.com...
>> Is anyone using the "latest" Update 2 (released 8 March 2006) for NOF 9
>> yet?
>>
>> Any issues discovered so far? I'm very keen for the fixes but I'm a bit
>> wary after the last "update".
>>
>> JJ
>>
>
>
-
Chuck «BeyondFusion»
Guest
Re: Update #2
Marcel,
The German version of Fusion 9 was released at the level of the initial
English version plus Update 1.
So when you see an Update 1 for the German version, that will be equal to
the English Update 2.
If you look at the list of changes for English Update 2, that will more or
less be what you'll see in German Update 1.
Not sure about the docs questions.
--
Chuck Joslin - Team NetObjects
BeyondFusion.com - Your Fusion Community
www.beyondfusion.com
Fusion Wish List - www.beyondfusion.com/wish
Register domain names at www.awavedomains.com
"Marcel" <marcel@pasdespam.fr> wrote in message
news:duusil$7r23@news01.netobjects.com...
> Hi Chuck,
>
> when will there be other language editions of Update#2? Or should I
> better change to the US-version of NOF9? Is this possible with my tons
> of NOD9-files?
>
> And is there an agenda of changes for the updated documentation? How do I
> know which parts are new? Thanks for your answer!
>
> Marcel
-
Re: Update #2
Hi Chuck,
when will there be other language editions of Update#2? Or should I
better change to the US-version of NOF9? Is this possible with my tons
of NOD9-files?
And is there an agenda of changes for the updated documentation? How do
I know which parts are new? Thanks for your answer!
Marcel
-
Re: Update # 2
I agree about the utter stupidity of giving two different things the same
name. I'm currently involved in a similar debate with a major mainframe
software vendor. The only place this works well is on the old Newhart Show,
remember Larry, Darryl and Darryl? That's the only place I know where it
worked well. Therefore, I've dubbed this the "Larry, Darryl and Darryl
Problem.
Mel
"Murray Eisenberg" <murray@math.umass.edu> wrote in message
news:duvj53$80n1@news01.netobjects.com...
> This is just a perpetuation of a totally perverse and stupid naming
> convention about which, at least this one user, has complained for some
> time.
>
> There is utterly NO GOOD REASON to use the same name for two different
> things (even if one distinguishes the two through some much more obscure
> build number or build date).
>
>
> Widman wrote:
>> This update has exactly the same name as the previous Update 2, even
>> though it is supposed to be imporved. So I assume you already downloaded
>> the first one. It is similar when you just go to the site and download
>> it. If you save to the same place as where you had the previous file, it
>> will ask if you want to replace it.
>> Richard Widman
>> www.widman.biz
>> Bolivia
>>
>> On Sat, Mar 11 2006 1:23 pm, "Tony Williams" <tw@invalid.com> said:
>>> Why when I clicked on "Check for Updates" when I opened NOF9 did I get a
>>> message there are no updates available when #2 was there???
>>> Tony
>>> "JJ" <jamesjimmy3000@yahoo.com> wrote in message
>>> news:duqrsj$63h3@news01.netobjects.com...
>>>> Is anyone using the "latest" Update 2 (released 8 March 2006) for NOF 9
>>>> yet?
>>>>
>>>> Any issues discovered so far? I'm very keen for the fixes but I'm a
>>>> bit wary after the last "update".
>>>>
>>>> JJ
>>>>
>>>
>>
>>
>
> --
> Murray Eisenberg murray@math.umass.edu
> Mathematics & Statistics Dept.
> Lederle Graduate Research Tower phone 413 549-1020 (H)
> University of Massachusetts 413 545-2859 (W)
> 710 North Pleasant Street fax 413 545-1801
> Amherst, MA 01003-9305
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules