Results 1 to 4 of 4

Thread: NOF 9 Just plain stinks

  1. #1
    Paul walters
    Guest

    Default NOF 9 Just plain stinks

    I am sorry after thorough thorough usage of NOF 9 I can honestly say I was
    ripped off and it has to be the worst sotware I Have ever bought.

    Todays issue is after installing update#2 NOF just hangs when trying to
    publish. On top of my invalid parameter error I recieve when I try to
    manipulate the photo images I have on the site and I cannot add any new
    images do to the photo properties box failing to open correctly which gives
    my the invalid parameter error.

    Suffice it to say. what a rip, $109 US for this upgrade is a joke and I am
    extremely disappointed. I ahve been loyal since version 7 and this is the
    tanks Net Objects give us. Rip us off with a poorly written program Shame on
    you



  2. #2
    Gary W Dumbleton
    Guest

    Default Re: NOF 9 Just plain stinks


    I have not had that problem.

    When you installed, did you let the installer completely finish and close by
    itself with the original install and the upgrade?

    Have you uninstalled and re-install NOF and re-apply update #2?

    Gary

    PS The photo manipulation in NOF should work without any problems, however,
    you would get better results if you used some other software like Photoshop
    for picture manipulations before you import into NOF


    "Paul walters" <pwalters@ltacomputers.com> wrote in message
    news:dv5rm4$9ao1@news01.netobjects.com...
    >
    > I am sorry after thorough thorough usage of NOF 9 I can honestly say I was
    > ripped off and it has to be the worst sotware I Have ever bought.
    >
    > Todays issue is after installing update#2 NOF just hangs when trying to
    > publish. On top of my invalid parameter error I recieve when I try to
    > manipulate the photo images I have on the site and I cannot add any new
    > images do to the photo properties box failing to open correctly which
    > gives my the invalid parameter error.
    >
    > Suffice it to say. what a rip, $109 US for this upgrade is a joke and I am
    > extremely disappointed. I ahve been loyal since version 7 and this is the
    > tanks Net Objects give us. Rip us off with a poorly written program Shame
    > on you
    >
    >





  3. #3
    Shannell
    Guest

    Default Re: NOF 9 Just plain stinks

    Might be pointless saying this but try a reboot and see if that helps, NOF
    gets unstable when resources get low, in fact it has a memory leak that
    causes resources to get low...


    "Paul walters" <pwalters@ltacomputers.com> wrote in message
    news:dv7uh6$9p64@news01.netobjects.com...
    > Gary,
    >
    > I wish I had you luck, I on the other hand have had nothing but problems.
    > After the upgrade #2 NOF was so screwed up I had no choice but to
    > uninstall and re-install which is what i am doing now. I couldn't Publish
    > any site , Heck i couldn't close the program is just sat there.
    >
    > In regards to the picture issue, it's not an editing problem it's just
    > placing the dang things. The program won't. I click on the picture icon,
    > set my picture range the window opens to selct pciture but then it doesn't
    > place and I get the invalid parameter error and the picture properties box
    > is blank like it isn't loading.
    >
    > Frustrated doesn't express my attitude towards NOF at this moment. 2
    > copies of nPower, 1 copu of the upgrade I am invested and this is not
    > acceptable. I have tickets open at NetObjects but haven't heard word one.
    > Afraid to load the 2 updates since when I did that the program was
    > complete trash.
    >
    > So, I am left to ponder my next move. Currently the lack of support makes
    > getting a stable version iffy at best. As good as this fourm is I am
    > having some issues other are not. I know there is one other user who had
    > the picture issue but his went away on its own. I will continue chasing my
    > Windmill so to speak. Until I get completely fed up and try something
    > else.
    > Thanks
    > Paul
    > "Gary W Dumbleton" <gary@gwd.net> wrote in message
    > news:dv6d21$9eb2@news01.netobjects.com...
    >>
    >> I have not had that problem.
    >>
    >> When you installed, did you let the installer completely finish and close
    >> by itself with the original install and the upgrade?
    >>
    >> Have you uninstalled and re-install NOF and re-apply update #2?
    >>
    >> Gary
    >>
    >> PS The photo manipulation in NOF should work without any problems,
    >> however, you would get better results if you used some other software
    >> like Photoshop for picture manipulations before you import into NOF
    >>
    >>
    >> "Paul walters" <pwalters@ltacomputers.com> wrote in message
    >> news:dv5rm4$9ao1@news01.netobjects.com...
    >>>
    >>> I am sorry after thorough thorough usage of NOF 9 I can honestly say I
    >>> was ripped off and it has to be the worst sotware I Have ever bought.
    >>>
    >>> Todays issue is after installing update#2 NOF just hangs when trying to
    >>> publish. On top of my invalid parameter error I recieve when I try to
    >>> manipulate the photo images I have on the site and I cannot add any new
    >>> images do to the photo properties box failing to open correctly which
    >>> gives my the invalid parameter error.
    >>>
    >>> Suffice it to say. what a rip, $109 US for this upgrade is a joke and I
    >>> am extremely disappointed. I ahve been loyal since version 7 and this is
    >>> the tanks Net Objects give us. Rip us off with a poorly written program
    >>> Shame on you
    >>>
    >>>

    >>
    >>
    >>

    >
    >




  4. #4
    Paul walters
    Guest

    Default Re: NOF 9 Just plain stinks

    Gary,

    I wish I had you luck, I on the other hand have had nothing but problems.
    After the upgrade #2 NOF was so screwed up I had no choice but to uninstall
    and re-install which is what i am doing now. I couldn't Publish any site ,
    Heck i couldn't close the program is just sat there.

    In regards to the picture issue, it's not an editing problem it's just
    placing the dang things. The program won't. I click on the picture icon, set
    my picture range the window opens to selct pciture but then it doesn't place
    and I get the invalid parameter error and the picture properties box is
    blank like it isn't loading.

    Frustrated doesn't express my attitude towards NOF at this moment. 2 copies
    of nPower, 1 copu of the upgrade I am invested and this is not acceptable. I
    have tickets open at NetObjects but haven't heard word one. Afraid to load
    the 2 updates since when I did that the program was complete trash.

    So, I am left to ponder my next move. Currently the lack of support makes
    getting a stable version iffy at best. As good as this fourm is I am having
    some issues other are not. I know there is one other user who had the
    picture issue but his went away on its own. I will continue chasing my
    Windmill so to speak. Until I get completely fed up and try something else.
    Thanks
    Paul
    "Gary W Dumbleton" <gary@gwd.net> wrote in message
    news:dv6d21$9eb2@news01.netobjects.com...
    >
    > I have not had that problem.
    >
    > When you installed, did you let the installer completely finish and close
    > by itself with the original install and the upgrade?
    >
    > Have you uninstalled and re-install NOF and re-apply update #2?
    >
    > Gary
    >
    > PS The photo manipulation in NOF should work without any problems,
    > however, you would get better results if you used some other software like
    > Photoshop for picture manipulations before you import into NOF
    >
    >
    > "Paul walters" <pwalters@ltacomputers.com> wrote in message
    > news:dv5rm4$9ao1@news01.netobjects.com...
    >>
    >> I am sorry after thorough thorough usage of NOF 9 I can honestly say I
    >> was ripped off and it has to be the worst sotware I Have ever bought.
    >>
    >> Todays issue is after installing update#2 NOF just hangs when trying to
    >> publish. On top of my invalid parameter error I recieve when I try to
    >> manipulate the photo images I have on the site and I cannot add any new
    >> images do to the photo properties box failing to open correctly which
    >> gives my the invalid parameter error.
    >>
    >> Suffice it to say. what a rip, $109 US for this upgrade is a joke and I
    >> am extremely disappointed. I ahve been loyal since version 7 and this is
    >> the tanks Net Objects give us. Rip us off with a poorly written program
    >> Shame on you
    >>
    >>

    >
    >
    >




Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •